APTO 6000-0083 User manual

INSTRUCTION MANUAL
FELT DRAWER
DESIGNED BY PJ PRODUCTION & HANS THYGE & CO
Designed by PJ Production & Hans Thyge & Co // Hårup Skovvej 2, 8600 Silkeborg, Danmark // + 45 86 81 23 75 // www.aptocollection.dk
Copyright ©

INSTRUCTION MANUAL
PARTS
Designed by PJ Production & Hans Thyge & Co // Hårup Skovvej 2, 8600 Silkeborg, Danmark // + 45 86 81 23 75 // www.aptocollection.dk
Copyright ©
FELT DRAWER
Felt: 6000-0083
8 x SELF-TAPPING SCREWS

INSTRUCTION MANUAL
WHAT YOU WILL NEED
Designed by PJ Production & Hans Thyge & Co // Hårup Skovvej 2, 8600 Silkeborg, Danmark // + 45 86 81 23 75 // www.aptocollection.dk
Copyright ©
1 x ELECTRIC DRILL

INSTRUCTION MANUAL
STEP 1
Designed by PJ Production & Hans Thyge & Co // Hårup Skovvej 2, 8600 Silkeborg, Danmark // + 45 86 81 23 75 // www.aptocollection.dk
Copyright ©
Place the felt drawer underneath the table top running parallelly with the edge. Now carefully insert the self-tapping scews into the
holes of the felt drawer, and use the electrical drill until the self-tapping screws have been sufficiently tightened.
Note: We recommend you to place the self-tapping screws as shown on the illustration.
A
DETAIL A
SCALE 1 : 1

INSTRUCTION MANUAL
STEP 2
Designed by PJ Production & Hans Thyge & Co // Hårup Skovvej 2, 8600 Silkeborg, Danmark // + 45 86 81 23 75 // www.aptocollection.dk
Copyright ©
When the four visible visible screws have been tightened, please continue with the four invisible. Start by pulling out the drawer.
Now carefully insert the self-tapping scews into the holes of the felt drawer, and use the electrical drill until the self-tapping screws
have been sufficiently tightened.

INSTRUCTION MANUAL
STEP 3
Designed by PJ Production & Hans Thyge & Co // Hårup Skovvej 2, 8600 Silkeborg, Danmark // + 45 86 81 23 75 // www.aptocollection.dk
Copyright ©
The felt drawer is now ready to be used. Enjoy!

DANISH DESIGN
Copyright ©
Hårup Skovvej 2, 8600 Silkeborg, Danmark
+ 45 86 81 23 75 // www.aptocollection.dk