StarTech.com DuraView RACKCONS1701 User manual

Manual Revision: 01/22/2015
For the most up-to-date information, please visit: www.startech.com
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
RACKCONS1701
RACKCONS1501
RACKCONS1901
RKCONS1901xx
1U 15”/17”/19” Rackmount LCD Console -
USB + PS/2
*actual product may vary from photos

Instruction Manual
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by
turning the equipment o and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver
is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Use of Trademarks, Registered Trademarks, and other Protected Names and
Symbols
This manual may make reference to trademarks, registered trademarks, and other
protected names and/or symbols of third-party companies not related in any way to
StarTech.com. Where they occur these references are for illustrative purposes only and do not
represent an endorsement of a product or service by StarTech.com, or an endorsement of the
product(s) to which this manual applies by the third-party company in question. Regardless
of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby
acknowledges that all trademarks, registered trademarks, service marks, and other protected
names and/or symbols contained in this manual and related documents are the property of
their respective holders.

Instruction Manual
i
Table of Contents
Introduction............................................................................................1
Packaging Contents ................................................................................................................................. 1
Installation ..............................................................................................1
Hardware Installation .............................................................................................................................. 1
Mounting the console............................................................................................................................. 1
Connecting the console ......................................................................................................................... 4
Turning on the console........................................................................................................................... 4
Conguring display settings................................................................................................................. 4
Testing the console................................................................................................................................... 5
Panel controls and OSD functions.......................................................6
Auto tune ..................................................................................................................................................... 6
Input Source................................................................................................................................................ 6
Brightness.................................................................................................................................................... 7
Contrast ........................................................................................................................................................ 7
Color............................................................................................................................................................... 7
Position ......................................................................................................................................................... 8
Language ..................................................................................................................................................... 8
Recall.............................................................................................................................................................. 9
Exit.................................................................................................................................................................. 9
Power Indicator.......................................................................................................................................... 9
Specications..........................................................................................10
Technical Support ..................................................................................12
Warranty Information............................................................................12

Instruction Manual
1
Introduction
Packaging Contents
• 1U LCD Rack Console Drawer
• Console Cable Kit
• Mounting Rails - Set
• Power Adapter
Installation
Hardware Installation
Hardware Kit Contents
Mounting the console
1. Loosen the rear screws (pre-installed in side rails) and adjust the length of the rear
bracket to t the depth of your cabinet:
Side Rails with front and rear brackets (2) Keys (2)
Screw kit
(Used to attach
Rail Mount to
Console body)

Instruction Manual
2
2. Install the rail into the cabinet:
3. Tighten the screws that were loosened in Step 1:
4. Install the remaining rail, repeating Steps 1-3.
5. Gently, but rmly insert the console into the left and right rails:

Instruction Manual
3
6. Unlock the console, and pull the left and right rail-lock switches towards you
simultaneously, and hold them in this position while pushing the console into the
cabinet:
7. Install three screws on each side of the console:
8. Installation is now complete:

Instruction Manual
4
Connecting the console
To connect an LCD console to a computer, perform the following steps:
1. Turn o your computer.
2. Insert the video (VGA) connector of the KVM cable into the video card connector on
the rear panel of your computer.
3. Identify and connect the PS/2 mouse and PS/2 keyboard connector to the correct
PS/2 ports on the rear panel of your computer.
4. Connect the AC power cord to the power inlet on the console. Connect the
remaining end of the AC power cord to an available power outlet.
Turning on the console
Make sure all cables and the power cord are connected properly. Using two hands,
grasp the rear of the drawer, lift the tab and pull the panel up and forward. This will
disengage the momentary on/o switch and the unit should power on.
The LED located to the left of the monitor panel should turn from orange to green,
verifying that the unit is operational.
Conguring display settings
After connecting the drawer and turning on your computer, you may need to
congure one or more of the following display settings to allow the computer to
display at the console’s native resolution. See Specications on page 9 for the correct
resolution mode for your model.
• Display mode (also called desktop area or video resolution)
• Refresh rate (also called vertical scan rate or vertical sync)
• Color depth (also called color palette or number of colors)

Instruction Manual
5
Each video card has several controls that allow you to adjust the display settings;
however, the software and driver for each video card is unique. In most cases, you
can adjust these settings using a program or utility provided by the manufacturer of
the video card. Most video cards use the Windows Display Properties control panel to
congure the display. To open the Windows Display Properties, click the right mouse
button in a blank area of the Windows desktop and then select Properties. The Settings
tab usually lets you change the Color Palette and the Desktop Area (X by Y pixel
resolution).
Some video cards integrate additional features into the Windows Display Properties
control panel giving you extra setup options that are exible and easy to use.
For example, the control panel may include an Advanced Properties button, an
Adjustment tab, or a Refresh tab for changing other settings. Other video cards have a
separate utility for setting display properties.
Whenever you change the resolution, color, or refresh rate, the image size, position,
or shape may change. This behavior is normal. You can readjust the image using the
monitor on-screen controls. For more information on the monitor on-screen controls,
refer to Panel controls and OSD functions. For more information on conguring the
display settings, please refer to the manual that accompanied your video card.
Testing the console
To test that the console is working properly, perform the following steps:
1. Power up the monitor/keyboard drawer, and then turn on your computer.
2. Make sure that the video image is centered within the screen area. Use the OSD
controls to adjust the image (see Panel controls and OSD functions) or press the
Auto button on the right side of the monitor.
Note: If the unit does not power up when the panel is pulled up, try pushing the soft
power on/o button on the left side of the monitor panel to power up the unit.

Instruction Manual
6
Note:You can adjust the horizontal and vertical position, contrast, and brightness to
better suit your video card and your personal preference.
Before you begin, make sure that power to all of the devices you will be connecting
to the console have been turned o. To prevent damage to your installation due
to ground potential dierence, make sure that all of the devices being installed are
properly grounded. Once all peripherals have been connected, please power them on.
Panel controls and OSD functions
The following controls are located on the left side of the the console monitor:
Controls Descriptions
Soft power on/o. Adjacent LED is lit when on.
Auto Auto-synchronize and scale down display to any valid factory
preset timings.
Up Press to scroll to the function you want to adjust.
Down Press to scroll to the function you want to adjust.
Menu To access the main menu. This button also acts as the Enter
button.
Auto tune
Press the “Auto tune” button. The panel will adjust the display size automatically and
also tune the panel to its optimized state.
Input Source
1. Press the Menu button.
2. Use the Down and Up buttons to scroll.
3. Press the Menu button to enter, and you will see: VGA/DVI.
4. Use the Down and Up buttons to select the input signal source.
5. Press the Menu button to save your selection.

Instruction Manual
7
Brightness
1. Press the Menu button.
2. Use the Down and Up buttons to scroll to Brightness.
3. Press the Menu button to enter.
4. Use the Down and Up buttons to adjust the brightness of the display.
5. Press the Menu button to save your selection.
Contrast
1. Press the Menu button.
2. Use the Down and Up buttons to scroll to Contrast.
3. Press the Menu button to enter.
4. Use the Down and Up buttons to adjust the contrast of the display.
5. Press the Menu button to save your selection.
Color
1. Press the Menu button.
2. Use the Down and Up button to scroll.
3. Highlight Color, and press the Menu button to enter, which will launch the following
screen:
Icon Description
9300°K To set CIE coordinates at 9300°K color
7500°K To set CIE coordinates at 7500°K color
6500°K To set CIE coordinates at 6500°K color
User To set user dened CIE
Auto color To auto adjust color
Return To exit and return to the previous page
4. Use the Down and Up buttons to adjust the contrast of the display.
5. Press the Menu button to save your selection.

Instruction Manual
8
Position
1. Press the Menu button.
2. Use the Down and Up buttons to scroll.
3. Highlight Position and press the Menu button to enter, which will launch the
following screen:
Icon Description
Image Pos To adjust the position of the image
OSD Pos To adjust the position of the OSD
Return To exit and return to the previous page
4. Use the Down and Up buttons to scroll.
5. Press the Menu button to save your selection.
Language
1. Press the Menu button.
2. Use the Down and Up buttons to scroll.
3. Highlight Language, and press the Menu button to select, which will launch the
following screen:
4. Use the Down and Up buttons to scroll, and highlight the preferred language.
5. Press the Menu button to save your selection.
English
German
French
Italian
Spanish

Instruction Manual
9
Recall
1. Press the Menu button.
2. Use the Down and Up buttons to scroll to Recall. Press the Menu button to enter,
where you will be able to select Yes/No using the Down and Up buttons. Once you
have done so, press the Menu button. Note: selecting Yes will return your settings to
the factory default state. Select No if you do not wish to make this change.
Exit
To exit the menu, scroll to Exit and press the Menu button.
Power Indicator
Light Color Status
Green ON
RED Standby
RED Suspend
RED OFF

Instruction Manual
10
Specications
RACKCONS1501 RACKCONS1701 RACKCONS1901
RKCONS1901xx
Display Size 15” 17” 19”
Panel Type Active Matrix TFT LCD
Resolution
Capabilities 1024 x 768 (max.)
Back Light Dual lamps Four lamps
Supported
Colors
16M Colors
(6-bit with FRC)
Response
Time
Rising Time: 5ms
Decay Time: 11ms
Rising Time: 2ms
Decay Time: 14ms
Rising Time: 2ms
Decay Time: 10ms
System
Cables VGA+2 x PS/2 cable
Keyboard /
Mouse
106 key PS/2 keyboard
with touchpad
Sync 45~80KHz
Power
Source 100-240 VAC input
Operating
Temperature
0 ~50°C
(32°F ~ 122°F)
Storage
Temperature
-20° ~ 60°C
(-4°F ~ 140°F)
Humidity 10% ~ 90% RH
Dimension 447.5 x 482 x 44mm
(17.6 x 19 x 1.7”)

Instruction Manual
11
Net Weight 11.8kg (26lbs) 13Kg (28.66lbs) 15Kg (33.06lbs)
Chassis
Construction Heavy duty steel
Regulatory
Certication CE/FCC

Instruction Manual
12
Technical Support
StarTech.com’s lifetime technical support is an integral part of our commitment to
provide industry-leading solutions. If you ever need help with your product, visit
www.startech.com/support and access our comprehensive selection of online tools,
documentation, and downloads.
For the latest drivers/software, please visit www.startech.com/downloads
Warranty Information
This product is backed by a two year warranty.
In addition, StarTech.com warrants its products against defects in materials
and workmanship for the periods noted, following the initial date of purchase.
During this period, the products may be returned for repair, or replacement with
equivalent products at our discretion. The warranty covers parts and labor costs only.
StarTech.com does not warrant its products from defects or damages arising from
misuse, abuse, alteration, or normal wear and tear.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their
ocers, directors, employees or agents) for any damages (whether direct or indirect,
special, punitive, incidental, consequential, or otherwise), loss of prots, loss of business,
or any pecuniary loss, arising out of or related to the use of the product exceed the
actual price paid for the product. Some states do not allow the exclusion or limitation
of incidental or consequential damages. If such laws apply, the limitations or exclusions
contained in this statement may not apply to you.

Hard-to-nd made easy. At StarTech.com, that isn’t a slogan. It’s a promise.
StarTech.com is your one-stop source for every connectivity part you need. From
the latest technology to legacy products — and all the parts that bridge the old and
new — we can help you nd the parts that connect your solutions.
We make it easy to locate the parts, and we quickly deliver them wherever they need
to go. Just talk to one of our tech advisors or visit our website. You’ll be connected to
the products you need in no time.
Visit www.startech.com for complete information on all StarTech.com products and
to access exclusive resources and time-saving tools.
StarTech.com is an ISO 9001 Registered manufacturer of connectivity and technology
parts. StarTech.com was founded in 1985 and has operations in the United States,
Canada, the United Kingdom and Taiwan servicing a worldwide market.