Aquatic AI6036RC50 User manual

SPECIFICATIONS:
The manufacturer accepts a 1/4” variance. There are variations on each tub and specications are subject to change as we improve upon our product as required. The dimensions needed for site preparation and structure building should be measured from the tub;
Aquatic Industries, Inc. assumes no responsibility for preparatory work. www.aquaticwhirlpools.com 800.555.5324
Rough-In Plumbing
Measurements
CENTury SErIES MODEL # AI6036RC50 / AI32AIR6036TO (Tub Only)
CENTury 50 MOTIF
GENERAL SPECIFICATIONS:
Tub Size 60 1/2”” x 36 1/2” x 25”
153.7 cm x 92.7 cm x 63.5 cm
Bathing Well 37 1/2” long
19” wide
22 3/4” interior depth
Maximum Water Depth 17 3/4”
Shipping Weight 206 lbs. / 93 kg
Tub Weight Filled 749 lbs. / 340 kg
Tub Only Weight 95 lbs. / 43 kg
Weight w/Equipment 136 lbs. / 62 kg
Gallons to Overow 74 gal. / 281 L
Gallons to Operate 55 gal. / 208 L
ELECTRICAL SPECIFICATIONS:
Pump 2 HP; 11 AMP; 110V
Requirement 15 AMP; 110V, separate circuit
required protected w/ Class A GFCI
Inline Heater 1.5 kW; 12 AMP; 110V
Requirement 15 AMP; 110V, separate circuit
required protected w/ Class A GFCI
This unit is not recommended for shower installations.
• Comfort Pillow -- Oval or Rectangle
• Jet Finish
- Chrome, Polished Brass, Gold, Polished Nickel
or Satin Nickel
• Bolt-On Grab Bar
- White, Biscuit, Chrome, Polished Brass, Gold,
Polished Nickel, Satin Nickel, or Oil Rubbed Bronze
• Lift & Turn Waste and Overow
- Chrome, Polished Brass, Gold, Polished Nickel,
Satin Nickel or Oil Rubbed Bronze
• Cable Drive Waste and Overow
- Chrome, Polished Brass, Gold, Polished Nickel,
Satin Nickel, Oil Rubbed Bronze or Color
Matched (Bone, White and Biscuit Only)
• Hand Held Jet - Chrome or Polished Brass
• Optional Pump Location
• Remote Pump Location
• Premium Colors
All acrylic colors featured by Aquatic match the
industry’s leading xture manufacturers.
OPTIONAL EQUIPMENT:
8 Hydrotherapy Jets including:
- 4 Full Size Pressure-Flo Hydrotherapy Jets
- 2 Pressure Plus Hydrotherapy Jets
- 1 Recessed Rotary Massage Jets
- 1 Recessed Fan Jet
Aquatic Quality Features:
- 2 HP, 3-Speed Run-Dry Pump
- Bath-Side Electronic Control Panel
- Chromatherapy LED Lighting
- 1.5 kW Inline Maintenance Heater
- ”Quiet Pad” Anti-Vibration Pump Mount for Quiet Pump Operation
- Slip Resistant Floor
- Pre-leveled ABS Support Base
- Heat-bent Rigid PVC Piping for Optimum Sanitary Conditions
- Durable, Easy to Clean, Lucite® Cast Acrylic Surface
- Available in 8 Standard No-Charge Colors
UL & IAPMO Listed, Factory Tested
Limited Lifetime Warranty
STANDARD EQUIPMENT:
Fax-On-Demand
Document # 1291
36 1/2”
6”
14”
Deck
Width 3”
Total
Width 5”
Back
Angle
12˚
20 1/2”
60 1/2” 36 1/2”
22 1/4”
25”
56”
January 2008
57” 33 1/2”
2
1