Arada DELTA User manual

ASSEMBLY INSTRUCTIONS.
No tools required, assemble by hand only!
Fire pit should only be assembled in the order shown below.
Only slots with matching number of corner holes should be paired up.
ABCC A ᤯
ᤵᤵᤵᤵ
COMPONENTS
1 x 1 x 1 x 1 x
1 x
SEE OVERLEAF FOR HINTS ON ASSEMBLY
AND DISASSEMBLY OF DELTA FIRE PIT
ARADA DELTA FIRE PIT
Only use Delta Fire Pit outdoors.
Do not light for use on combustible surfaces
such as wooden decking.

TAKING APART FOR TRANSPORT / STORAGE
Only dismantle the Delta Fire Pit when it has cooled sufficiently and is safe to touch!
Disassessembly is as simple as doing the reverse order of the assembly process.
You may find it easier or quicker to begin dismantling by following these hints below.
Look for a leg fin with the flame
symbol in corner and grasp edge with
your right hand.
Whilst applying downward force along this
edge with left hand, pull the fin upwards
and in direction of slot.
Carefully dispose of any ashes and then
place the fire pit upside-down on the
ground.
Pieces should slide fully
home and you should have a
rounded edge at the corner
Place base and
griddle pieces into
the bottom of the
pit. Now it’s ready
to light!
Align side slots so that they are perpendicular
to one-another and slide in smoothly.
Practice may be required, but tools are not!
ASSEMBLY HINTS
ARADA DELTA FIRE PIT