Zest 4 Leisure Emily Love Seat User manual

Assembly Instructions
(W x D x H) 1.94m x 0.83m x 0.945m
Product Name: Emily Love Seat
PLEASE KEEP THIS INSTRUCTION
Zest4Leisure
01352 752555 option 1 –[e-mail]

Emily Love Seat Assembly Instructions
Requires 2 person assembly.All screw holes to be pre-drilled. Tools required:
Hex/Allen Key, Corded/Cordless Drill, Pozi-drive Bit/Screwdriver, 3mm Drill Bit,
Flat/Slotted Screwdriver, 10mm Spanner.
Emily Love Seat Pack List
Item Description Quantity
A SeatAssembly 2
B Side Assembly 4
C BackAssembly 2
D Lower ShelfAssembly 1
E Upper ShelfAssembly 1
Fixings
105mm Bolt 16
10mm Nuts 8
Washers 8
Cross Dowel 8
60mm Screws 8
www.zest4leisure.co.uk

Please take a few moments to check all pack contents listed.
Please contact “Zest4Leisure” directly if any of the pack contents are damaged
or missing. Contact telephone: [phone] option 1 or email:
[email protected]
Assembly requires 2 persons. All screw holes to be pre-drilled.
Tools required: Tools required: Hex/Allen Key, Corded/Cordless Drill, Pozi-drive
Bit/Screwdriver, 3mm Drill Bit, Flat/Slotted Screwdriver, 10mm Spanner.
Emily Love Seat is now complete.
1. Position Seat AssemblyA between SideAssemblies B (Fig.1a). Align bolt holes
and attach using 4no 105mm Bolts, Washers and Nuts (Fig.1b).
Do not fully tighten at this stage.
2. Insert 4no Cross Dowels into 10 mm holes to rear of Back Assembly (C) ensuring
slots face outwards (Fig. 2a). Position the Back Assembly between side
assemblies (Fig. 2b) and insert 2no bolts per side and thread bolts into cross
dowels (Figs.2c & 2d).
Fully tighten all Bolts at this stage.
Repeat stages 1-2 for second seat.
3. Locate Lower Shelf Assembly D between seats and attach using 4no Screws - 2
per side (Figs.3a & 3b).
4. Position Upper Shelf Assembly E between seats and attach using 4no Screws - 2
per side (Figs.4a & 4b).

www.zest4leisure.co.uk
1b1a
2a 2b
2c 2d

www.zest4leisure.co.uk
3b3a
4a 4b