1. Press the power button ( ) to turn on.
2. Press the key button ( ) quickly twice.
3. Enter the temporary PIN 655353 then press the key
button ( ) to confirm.
4. Enter your new Secret PIN then press the key button ( )
to confirm.
5. Enter your new Secret PIN again then press the key button
( ) to confirm.
Note: If you’ve made a mistake you can go back to Step 1.
Initialize (or Reset) the USB Device (caution)
Note: This will completely erase all data and reset to factory defaults.
1. Press the power button ( ) to turn on.
2. Press and hold the key button ( ) and the number 9 until the blue light stops blinking (10 seconds).
3. Press the number 0 (zero).
●The PIN will be reset to the factory default 111111 (six ones).
●The USB device must be reformatted. Optionally download Password Manager.
Best Practices | USB Safety Tips
Enter The PIN before inserting the USB into its slot. Do not enter the PIN while the device is connected.
Close all applications before hibernating, suspending, logging off or ejecting the USB device. This is an important step especially if
you are using a software cryptocurrency wallet, KeePass or Key Quest Vault.
Put the USB Device back in its capsule when not in use. You should remember to seal the capsule and store it in a safe place.
Make sure you're not being watched or recorded by a surveillance camera. Be aware of your surroundings and look behind you.
Do not plug the USB into a suspicious computer. Avoid using a computer that may be infected with Spyware. If you must use an
unknown computer, boot from a Trusted Operating System, and use the Virtual Keyboard to enter passwords.
Do not use a found USB device. If a USB drive magically appears do not plug it into any computer. Be cautious if your USB drive was
out of your possession for any period of time.