arcelik Beko B13 How to use

B13 B7S B7SLED WASHING MACHINE SERVICE HAND BOOK
B13 B7S-B7SLED CONTROL SYSTEM
WASHING MACHINE
SERVICE HANDBOOK
SERVICE HANDBOOK NO:1

B13 B7S B7SLED WASHING MACHINE SERVICE HAND BOOK
2
1. DOOR
2. Contents
1. DOOR………………………………………….………..………………………………..1
1. DOOR ...................................................................................................................................................... 2
2. CONTENTS............................................................................................................................................... 2
3. SECURITY WARNINGS.............................................................................................................................. 5
3.1. GENERAL SECURITY ................................................................................................................................... 5
3.1.1. Electrical safety ............................................................................................................................... 5
3.1.2. Product safety ................................................................................................................................. 5
3.2. INTENDED USE ......................................................................................................................................... 6
3.3. CHILD SAFETY........................................................................................................................................... 6
3.4. COMPLIANCE TO ROHS DIRECTIVE ............................................................................................................... 6
3.5. PACKAGING INFORMATION.......................................................................................................................... 7
3.6. DISPOSAL OF WASTE PRODUCT..................................................................................................................... 7
3.7. POINTS TO CONSIDER DURING SERVICE .......................................................................................................... 7
4. PRODUCT INSTALLATION / INSTALLATION RULES / SETTINGS ................................................................. 9
4.1. CORRECT PLACE FOR INSTALLATION .............................................................................................................. 9
4.2. REMOVING THE PACKAGE SUPPORT............................................................................................................ 10
4.3. REMOVING THE TRANSPORT SAFETY BOLTS.................................................................................................. 10
4.4. CONNECTION TO THE SUPPLY WATER.......................................................................................................... 11
4.5. CONNECTION TO THE WATER DRAIN............................................................................................................ 12
4.6. ADJUSTMENT OF LEGS.............................................................................................................................. 13
4.7. ELECTRICAL CONNECTION.......................................................................................................................... 14
4.8. TRANSPORTATION OF THE PRODUCT............................................................................................................ 14
5. USE OF PRODUCT AND BYPRODUCTS.................................................................................................... 16
5.1. PREPARATION......................................................................................................................................... 16
5.1.1. Sorting the Laundry ....................................................................................................................... 16
5.1.2. Preparation of the garments to be washed................................................................................... 17
5.1.3. Things to do for energy saving ...................................................................................................... 18
5.1.4. Correct load capacity..................................................................................................................... 18
5.1.5. Laundry loading............................................................................................................................. 19
5.1.6. Use of detergent and softener....................................................................................................... 19
5.1.7. First Use......................................................................................................................................... 22
5.2. CONTROL PANEL ..................................................................................................................................... 23
5.3. PREPARING THE MACHINE ........................................................................................................................ 24
5.4. PROGRAM SELECTION AND TIPS FOR CORRECT WASHING ................................................................................. 25
5.5. MAIN PROGRAMS ................................................................................................................................... 26
5.6. ADDITIONAL PROGRAMS........................................................................................................................... 26
5.7. SPECIAL PROGRAMS................................................................................................................................. 27
5.8. TEMPERATURE SELECTION......................................................................................................................... 27
5.9. AUXILIARY FUNCTION SELECTION ................................................................................................................ 28
5.10. STARTING THE PROGRAM.......................................................................................................................... 30
5.11. CHILD LOCK ........................................................................................................................................... 30
5.12. PROGRESS OF THE PROGRAM .................................................................................................................... 31
5.13. LOCK OF THE LOADING DOOR..................................................................................................................... 31
5.14. CHANGING THE SELECTIONS AFTER THE PROGRAM STARTED ............................................................................. 31
5.15. CANCELLATION OF PROGRAM .................................................................................................................... 32
5.16. PROGRAM END ....................................................................................................................................... 32
5.17. THERE IS A “STANDBY MODE”IN YOUR MACHINE.......................................................................................... 32
6. MAINTENANCE AND CLEANING............................................................................................................. 33

B13 B7S B7SLED WASHING MACHINE SERVICE HAND BOOK
3
6.1. CLEANING THE DETERGENT DISPENSER......................................................................................................... 33
6.2. CLEANING THE LOADING DOOR AND THE DRUM............................................................................................ 34
6.3. CLEANING THE BODY AND CONTROL PANEL................................................................................................... 34
6.4. CLEANING THE WATER INLET FILTERS ........................................................................................................... 35
6.5. DRAINING THE REMAINING WATER AND CLEANING THE PUMP FILTER ................................................................. 35
7. .GENERAL OPERATING PRINCIPLE......................................................................................................... 39
7.1. WATER INTAKE PROFİLE ........................................................................................................................... 39
7.2. HEATİNG PROFİLE ................................................................................................................................... 41
7.3. ANTİ-FOAMİNG PROFİLE........................................................................................................................... 41
7.4. FOAM DETECTİNG AND EXTİNGUİSHİNG ALGORİTHM ..................................................................................... 42
7.5. PROGRAMME FLOWS............................................................................................................................... 43
8. COMPONENT WORKING PRINCIPLES..................................................................................................... 48
8.1. ELECTRONİC CONTROL AND VİSUAL CARD.................................................................................................... 48
8.2. SAFETY SWITCH (DOOR LOCK)................................................................................................................... 49
8.3. MOTOR................................................................................................................................................. 49
8.4. HEATER................................................................................................................................................. 50
8.5. VALVE................................................................................................................................................... 50
8.6. DRAIN PUMP ......................................................................................................................................... 50
8.7. NTC...................................................................................................................................................... 51
8.8. WATER LEVEL SENSOR ............................................................................................................................. 51
9. SERVICE FUNCTION TEST ....................................................................................................................... 53
10. B13 B7S B7SLED FAILURE FLOW DIAGRAM............................................................................................ 57
11. LIST OF EQUIPMENT/APPARATUS TO BE USED IN COMPONENT ASSEMBLY / DISASSEMBLY ................ 80
11.1. SHOCK ABSORBER PIN PUNCHING APPARATUS ............................................................................................. 80
12. COMPONENT ASSEMBLY / DISASSEMBLY.............................................................................................. 83
12.1. UPPER TABLE ASSEMBLY /DISASSEMBLY ..................................................................................................... 83
12.2. FRONT DOOR GROUP ASSEMBLY/DISASSEMBLY............................................................................................ 84
12.2.1. Exterior Door............................................................................................................................. 85
12.2.2. Hinge ........................................................................................................................................ 86
12.2.3. Handle cover............................................................................................................................. 86
12.2.4. Handle ...................................................................................................................................... 87
12.2.5. Lock Hook- Spring ..................................................................................................................... 87
12.2.6. Decorative cover ....................................................................................................................... 88
12.2.7. Glass ......................................................................................................................................... 88
12.3. PUMP COVER ASSEMBLY/DISASSEMBLY........................................................................................................ 88
12.4. FRONT WALL DISASSEMBLY/ASSEMBLY....................................................................................................... 89
12.5. DISPENSER PANEL.................................................................................................................................... 90
12.6. PANEL................................................................................................................................................... 91
12.7. PROTECTIVE FOIL .................................................................................................................................... 92
12.8. REFLECTOR ............................................................................................................................................ 93
12.9. PROGRAM CONTROL CARD ....................................................................................................................... 93
12.10. PARASITE FILTER ................................................................................................................................ 94
12.11. DETERGENT COMPARTMENT CONNECTION GROUP .................................................................................. 95
12.12. SINGLE VALVE.................................................................................................................................... 95
12.13. TWO-WAY VALVE............................................................................................................................... 95
12.14. SAFETY SWITCH ................................................................................................................................. 96
12.15. HEATER............................................................................................................................................ 96
12.16. PUMP .............................................................................................................................................. 97
12.17. DRUM BELLOWS ................................................................................................................................ 98
12.18. DRUM BELLOWS ASSEMBLY ................................................................................................................. 98
12.19. WATER INLET HOSE ............................................................................................................................ 98

B13 B7S B7SLED WASHING MACHINE SERVICE HAND BOOK
4
12.20. POLY VBELT ..................................................................................................................................... 99
12.21. PULLEY............................................................................................................................................. 99
12.22. MOTOR............................................................................................................................................ 99
12.23. POWER CABLE ................................................................................................................................. 100
12.24. UPPER COUNTERWEIGHT ................................................................................................................... 100
12.25. LOWER COUNTERWEIGHT .................................................................................................................. 100
12.26. DISCHARGE HOSE............................................................................................................................. 101
13. POWER CIRCUIT DIAGRAM.................................................................................................................. 102
14. PRODUCTS WITH BUILT-IN DRAINING SIPHON SHUT-OFF SYSTEM ...................................................... 103
15. EXPLODED DRAWINGS ........................................................................................................................ 105
15.1. BODY GROUP ....................................................................................................................................... 105
15.2. CONTROL GROUP.................................................................................................................................. 105
15.3. WATER SYSTEM.................................................................................................................................... 106
15.4. VISUAL GROUP ..................................................................................................................................... 106
15.5. FRONT WALL GROUP............................................................................................................................. 107
15.6. FRONT DOOR........................................................................................................................................ 107
15.7. DRIVING GROUP ................................................................................................................................... 108
15.8. 16.6. ISOLATION GROUP........................................................................................................................ 108
16. PART LIST ............................................................................................................................................ 109
17. LIST OF FIGURES AND PICTURES.......................................................................................................... 109
18. TABLE LIST........................................................................................................................................... 111

B13 B7S B7SLED WASHING MACHINE SERVICE HAND BOOK
5
3. Security Warnings
This section includes security instructions which may help prevent the injuries and
material damage risks. All kinds of warranties shall be invalid if these instructions are
not observed.
3.1. General Security
This product can be used by the children who are at the age of 8 and over and
the people whose physical, sensory or mental skills are not fully developed or who
do not have necessary required experience and knowledge as long as they are
supervised or trained about the safe use of the product and its risks. Children
should not play with the device. Cleaning and user maintenance procedures
should not be performed by the children unless they are supervised by a person.
Do not place the machine onto a floor covered with a carpet. Electrical parts will
get overheated since air cannot circulate from under the device. This may lead to
failures in machine.
If the product is faulty, it should not be operated before it is repaired by the
authorized service! Risk of electric shock!
3.1.1. Electrical safety
This product is designed to resume operation when power is on again after a
power cut. If you want to cancel a program, see the section titled “Cancelling a
Program”.
Plug the product into a grounded outlet protected by a 16-ampere fuse. Be sure to
make a qualified electrician arrange the grounding installation. If the machine is
used without grounding which conform to the local regulations, our company will
not be liable for any damages which may arise.
3.1.2. Product safety
Water mains and drain hose should be fixed securely and undamaged.
Otherwise, water leak may occur.
While there is still water inside the product, never open the loading door or
remove the filter. Probable injuries will take place due to flood or hot water.
Do not force open the locked loading door. Door can be opened a few minutes
after the washing cycle ends. If you force the loading door to open it, door and
lock mechanism may be damaged.
Unplug the product if it is not in use.
Do not wash the product by spraying or pouring water onto it! Risk of electric
shock!
Never touch the plug with wet hands! Do not grab the power cord to unplug the
machine, always unplug it by holding its plug.
Use only the detergents, softeners and additives intended for washing machines.
Observe the instructions on the label of textiles and the detergent package.
Product should be unplugged during installation, maintenance, cleaning and
repair procedures.

B13 B7S B7SLED WASHING MACHINE SERVICE HAND BOOK
6
Always make the Authorized Service perform installation and repair procedures.
Manufacturer cannot be held responsible for any damages which might arise due
to the operations performed by unauthorized persons.
If the power cord is damaged, it should be replaced by the manufacturer, after-
sale service or a similarly qualified, certified person (preferably an electrician) or a
person to be designated by the importer, in order to prevent the risk.
3.2. Intended Use
This product is for domestic use only. It is not suitable for commercial use and it
must not be used out of its intended use.
The product must only be used for washing and rinsing of laundry that are marked
accordingly.
The manufacturer waives any responsibility arisen from incorrect usage or
transportation.
Service life of the product you purchased is 10 years. This is the period of time
when the spare parts are made available in order for the product to operate as
specified.
3.3. Child Safety
Packaging materials may be dangerous for the children. Keep the packaging
materials out of the reach of the children.
Electric products are dangerous for children. Keep the children away from the
product when it is in use. Do not allow them to play with the product. Activate child
lock to prevent the children to tamper with it.
Do not forget to close the loading door when leaving the room where the product
it located.
Keep all detergents and additives in a safe place out of the reach of the children
with their lids or packages are closed.
3.4. Compliance to RoHS Directive
This product does not contain the harmful and prohibited substances which are
specified in Directive “Restriction of the Use of Certain Hazardous Substances in
Electrical and Electronic Equipments” (Turkey RoHS) issued by the Ministry of
Environment and Forestry of Republic of Turkey.
Complies with the EEE Directive.

B13 B7S B7SLED WASHING MACHINE SERVICE HAND BOOK
7
3.5. Packaging information
Packaging materials of the product are manufactured from recyclable materials in
accordance with our National Environment Regulations.
Do not dispose of the packaging materials together with the domestic or other
wastes. Take them to the packaging material collection points designated by the local
authorities.
3.6. Disposal of waste product
This product has been manufactured with high quality parts and materials which can
be reused and are suitable for recycling.
For this reason, do not discard this product with the domestic products and other
wastes at the end of its service life. Take the product to a collection point for the
recycling of the electric and electronic equipments. Ask these collection points to the
local administration in your region. Help contribute to the protection of environment
and conservation of the natural resources by delivering the used products to the
recycling points. Before disposing the product, cut its power cord and break the lock
mechanism of the loading door and make it inoperable for the safety of children.
3.7. Points to consider during service
During panel installation, make sure that the cables to be mounted onto the
electronic card are not pinched between the bracket sheets. It should be ensured
that all the sockets on the electronic card are seated well.
Is should be ensured that cable in the installation of cable group is not damaged.
Stripped or damaged cables should not be installed.
Cable route should be taken into account during installation; cable’s coming into
contact with sharp surfaces should be avoided and it should not be pinched.
It should be ensured that the sockets of all components which are serviced are
seated well. Arc may occur in case of inadequate contact.
It should be checked that the serviced product is connected to a grounded outlet
which is protected by a fuse with suitable current. Connection should not be made
with extension cable or multiple outlet. Moreover, no extension should be made to
the power cord or internal cables.
Put the serviced product onto a firm ground; do not put it on a carpet with high pile
or other similar surfaces. Electrical parts may get overheated since air cannot
circulate from under the device.
Do not put the serviced product onto its power cord or another cable.
If you have to unplug the serviced product from the mains, never grab it from its
power cord, always unplug it by holding its plug only.

B13 B7S B7SLED WASHING MACHINE SERVICE HAND BOOK
8
Check the power cord and plug of the serviced product. If its power cord or plug is
faulty, replace the power cord group completely with a new group. Please make
sure that the cables are not shortened, snapped, stripped, hardened and plug
ends are not broken, cracked, oxidized or loosened.
Check the outlet which the serviced product is plugged in. Product should not be
plugged in the outlets which are loosened, dislocated from its housing, broken, in
contact with water, dusty, dirty, oiled.
Along the route of the power cord from the outlet to the machine, make sure that
the cord does not come under heating sources, cupboards, devices, etc. which
may damage the product.
During service, do not perform hot works on the machine, such as soldering,
welding, etc. Do not leave these devices on the machine.
During service, do not wipe the machine with flammable and combustible
substances such as thinner, alcohol, etc.
After the machine is serviced, do not forget any paper-based materials inside the
machine such as service slip, brochure, etc.
IMPORTANT:
When the machine is required to be serviced by being tilted to the front, its transport
safety bolts should be installed.
This is required for the front components of the machine not to be damaged.

B13 B7S B7SLED WASHING MACHINE SERVICE HAND BOOK
9
4. Product Installation / Installation Rules / Settings
Apply to the nearest Authorized Service agent for the installation of your product. In
order to make your machine ready for use, before calling the authorized service,
make sure that electrical installation, clean water installation and water drain are
appropriate by checking the user manual. If this is not the case, call for a qualified
electrician and technician and take necessary actions.
Customer is liable to prepare the place of installation for the product,
electricity, clean water and waste water installations.
Installation and electrical connections of the product should be performed
by Authorized Service. Manufacturer cannot be held responsible for any
damages which might arise due to the operations performed by
unauthorized persons.
WARNING: Before use, check whether there is any damage on the
product. If the product is damaged, do not have it installed. Damaged
products pose a risk for your safety.
Make sure that the water inlet and drain hoses and the power cord of the
machine are not folded, pinched or broken during when the product is
pushed into its place after the installation or cleaning works.
4.1. Correct Place for Installation
Place the product on a hard floor. Do not put it onto a carpet with high pile or
other similar surfaces.
When the washing machine and drier are placed on top of each other, their total
weight –when loaded–amounts to 180 kilograms. Place the product onto a sound
and flat surface having an adequate load bearing capacity!
Do not place the product on the power cable.
Do not install the product in the environments where the temperature falls below 0
ºC.
Leave a minimum space of 1 cm between the machine and the furniture.

B13 B7S B7SLED WASHING MACHINE SERVICE HAND BOOK
10
4.2. Removing the Package Support
Figure 4.1
4.3. Removing the Transport Safety Bolts
WARNING: Do not remove the transport safety bolts before removing the
packaging support.
WARNING: Before operating the washing machine, remove the transport
safety bolts! Otherwise, the product will be damaged.
Figure 4.2
Figure 4.3
Tilt the machine backwards in
order to remove the package
support. Remove the
packaging reinforcement by
pulling the ribbon.
1. Loose all bolts with an
appropriate key until
they turn freely (C).
2. Remove transportation
safety bolts by turning
them gently.

B13 B7S B7SLED WASHING MACHINE SERVICE HAND BOOK
11
Figure 4.4
Keep the transportation safety bolts in a safe place to reuse when the
washing machine needs to be moved again in the future.
Never transport the machine unless its transport safety bolts are installed!
4.4. Connection to the Supply Water
Required water pressure is between 1-10 bar (0.1-1 MPa) for the proper
operation of the machine. For the healthy operation of the machine, 10 –80
liters of water per minute should be supplied from a fully opened tap. If the
water pressure is higher, attach a pressure decrease valve.
If you will use the double water inlet product as a single water inlet (cold),
before operating the product, make sure you insert the plug supplied with
the product to the hot water inlet. (It applies to the products with which blind
plug group is supplied.)
WARNING: Single water inlet models should not be be connected to the hot
water tap. Laundry may be damaged or product may not operate according
to the protection status.
WARNING: Do not use the old or used water inlet hoses for the new
product. It may leave stains on your laundry.
Figure 4.5
3. Attach the plastic covers
supplied in the User Manual
bag into the holes on the
rear panel. (P)
1. Connect the special hoses
supplied with the product to
the water inlets on the
product. Hose with red
inscriptions (left) (Max. 90
ºC) is for hot water inlet,
hose with blue inscriptions
(right) (Max. 25 ºC) is for
cold water inlet.

B13 B7S B7SLED WASHING MACHINE SERVICE HAND BOOK
12
WARNING: Make sure that the hot and cold water taps are
connected correctly when the product is being installed. Your laundry
may come out hot at the end of the washing cycle and wear out.
Figure 4.6
3. When hose connection is completed, check whether there is leak problems at
the connection points by opening the taps fully. In case of any leakage, close
the tap and remove the nut. Check the seal and tighten the nut again carefully.
In order to prevent the water leaks and resultant damages, keep the taps
closed when you do not use the product.
4.5. Connection to the water drain
End of the drain hose should be attached directly to waste water drain, lavatory or
bathtub.
WARNING: If the hose is dislocated during water draining, it will flood
your house. Also, there is risk of burning by hot water due to washing at
high temperatures. In order to prevent such situations and make sure
that the machine performs water intake and discharge processes
without any problem, fix the drain hose securely.
The hose should be attached to a height of at least 40 cm, and 100 cm at most.
Figure 4.7
2. Tighten the nuts of the
hose by hand. Never
use a tool when
tightening the nuts.

B13 B7S B7SLED WASHING MACHINE SERVICE HAND BOOK
13
If the hose is placed at floor level or near to floor (less than 40 cm) and heightened
later on, water drain becomes difficult and laundry may come out extremely wet.
Therefore, follow the heights described in the figure.
To prevent the waste water to go back into the machine again and to ensure easy
drainage, do not immerse the end of the hose into the waste water or do not insert
it into the drain for more than 15 cm. Shorten it if it is longer than enough.
End of the hose should not be bent, it should be stepped on and Hose should not
be folded between the drain and the machine.
If the hose is not long enough, add the original extension hose to be supplied and
use it in this way. Hose cannot be longer than 3.2 m. In order to prevent water
leaks, fasten the extension hose and the drain hose of the product securely with a
clips to prevent any leak.
4.6. Adjustment of legs
WARNING: Product should stand on its legs stable and in a
balanced way in order for it to operate silently and without vibration.
Ensure balance by setting its legs. Otherwise, the product may move
from its place and cause crushing and vibration problems.
Figure 4.8
1. Loosen the lock nuts on the feet by hand.
Figure 4.9
2. Adjust the legs until the product stands in a stable and balanced way.

B13 B7S B7SLED WASHING MACHINE SERVICE HAND BOOK
14
Figure 4.10
3. Tighten all lock nuts by hand again.
Figure 4.11
WARNING: Do not use any appliance or tool to loose the lock nuts.
Otherwise, they may be damaged.
4.7. Electrical connection
Plug the product into a grounded outlet protected by a 16-ampere fuse. If the
machine is used without grounding which conform to the local regulations, our
company will not be liable for any damages which may arise.
Connection should comply with the national regulations.
Power cable's plug should be easily accessible after installation.
If the current value of your fuse is below 16 amperes, make a qualified electrician
connect a 16-ampere fuse.
Voltage specified in the “Technical specifications” section should match the mains
voltage.
Do not connect to the extension cables or multiple outlets.
WARNING: Damaged power cables should be replaced by the
Authorized Service.
4.8. Transportation of the product
1. Before transporting the product, unplug it from the mains.
2. Remove the connections of water drain and water mains.
3. Discharge the entire amount of water left inside the product.
4. Install the transport safety bolts in reverse order of the disassembly procedure.

B13 B7S B7SLED WASHING MACHINE SERVICE HAND BOOK
15
Never transport the machine unless its transport safety bolts are
installed!
WARNING: Packaging materials may be dangerous for the children.
Keep the packaging materials out of the reach of the children.

B13 B7S B7SLED WASHING MACHINE SERVICE HAND BOOK
16
5. Use of Product and Byproducts
5.1. Preparation
5.1.1. Sorting the Laundry
Sort laundry according to type of fabric, color, and degree of soiling and allowable
water temperature.
Always obey the instructions given on the garment tags.
Figure 5.1 Washing Symbols

B13 B7S B7SLED WASHING MACHINE SERVICE HAND BOOK
17
5.1.2. Preparation of the garments to be washed
Laundry items which contain accessories such as support wire, buckle or metal
button may damage the washing machine. Remove the metallic parts or wash the
laundry by putting them into a bag or pillow case.
Figure 5.2
Remove all objects such as coins, pens, paper clips, etc. and reverse the pockets
and brush them. Such objects may damage the product or lead to sound problem.
Put the small size laundry items such as children socks or nylon socks into a
laundry bag or pillow case.
Place the curtains without squeezing them. Remove the curtain fittings.
Close the zips, sew the loose buttons, repair the tears and rips.
Wash the items at appropriate programs according to “Machine Wash” or “Hand
Wash” labels.
Do not wash the colored items with whites. New, dark color cotton garments may
release much dye. Wash them separately.
Tenacious stains should be handled appropriately before wash. If you are not
sure, check it with a dry cleaner.
Only use the dyes / color changers and descaling agents which are appropriate to
machine wash. Read the instructions on the packaging.
Wash the pants and delicates by reversing them.
Before washing the garments made of angora wool, wait them in the freezer
compartment of the refrigerator for a few hours. Thus, the tuft amount which may
be created will lessen.
Before putting the laundry items which are frequently exposed to substances such
as flour, lime powder, milk powder, etc., shake them well. Such dusts and
powders on the laundry may build up on the inner parts of the machine in time
and can cause damage.

B13 B7S B7SLED WASHING MACHINE SERVICE HAND BOOK
18
5.1.3. Things to do for energy saving
Following information will help you use the product in an ecological and energy-
efficient manner.
Operate the machine with the highest capacity permitted by the program you
selected and do not over load it. See “Program and consumption table”.
Observe the temperature recommendations given on the detergent package.
Wash your slightly soiled laundry at low temperatures.
Prefer short programs for the slightly soiled and small amounts of laundry.
Do not use pre-wash and high temperatures for your laundry which are not
heavily soiled and stained.
If you will dry your laundry in a drier, select the highest spin speed which is
recommended for your washing program.
Do not use detergent in excess of the amount recommended on the detergent
package.
5.1.4. Correct load capacity
The maximum load capacity depends on the type of laundry, the degree of soiling
and the washing programme desired.
Machine automatically adjusts the water amount according to the weight of the
laundry put inside it.
WARNING: Observe the information written in the "Program and
consumption table”. When it is overloaded, washing performance of the
machine will be decreased. Also, sound and vibration problems may occur.
Laundry type
Weight (g)
Bathrobe
1200
Napkin
100
Quilt cover
700
Bed sheet
500
Pillow case
200
Table cover
250
Towel
200
Hand towel
100
Night dress
200
Underwear
100
Men’s smock
600
Men’s shirt
200
Men’s pajamas
500
Blouse
100
Figure 5.3 Laundry weights

B13 B7S B7SLED WASHING MACHINE SERVICE HAND BOOK
19
5.1.5. Laundry loading
1. Open the laundry cover.
2. Put the garments into the machine in a loose manner.
3. Push and close the loading cover until you hear the locking sound. Make sure
that the garments do not get pinched between the door.
Loading door gets locked when operating. Door lock opens soon after the
program finishes.
WARNING: If the laundry is placed wrongly, sound and vibration problems
may occur in the machine.
5.1.6. Use of detergent and softener
When using detergent, softener, starch, fabric dye, bleach or lime scale
remover; read the manufacturer's instructions on the package carefully and
follow the suggested dosage values. Use measuring cup if available.
DETERGENT DISPENSER
Detergent dispenser consists of three compartments:
–(1) For prewash
–(2) For main wash
–(3) For softener
–(*) Moreover, there is a siphon part in the softener compartment.
Figure 5.4 Compartments of the detergent dispenser
DETERGENT, SOFTENER AND OTHER CLEANING AGENTS
Before starting the wash program, add detergent and softener.
While the washing cycle is in progress, do not leave the detergent dispenser
open!
If you are using a program without prewash, do not add detergent into the
prewash compartment (compartment number “1”).
In a prewash program, do not add liquid detergent into the prewash compartment
(compartment number “1”).

B13 B7S B7SLED WASHING MACHINE SERVICE HAND BOOK
20
If you are using detergent bag or dosage ball, do not select a prewash program.
Place the detergent bag or dosage ball directly among the garments in the
machine.
If you are using liquid detergent, do not forget to place the liquid detergent
container into the main wash compartment (compartment number “2”).
DETERGENT SELECTION
Detergent type to be used depends on the fabric type and color.
Use separate detergents for color and white laundry items.
Wash your delicate garments only with the special detergents which are used for
delicates (liquid detergent, wool shampoo, etc.).
You are recommended to use liquid detergent when washing dark color garments
or quilts.
Only wash the woolens with the special detergent used for woolens.
WARNING: Only use the detergents which are intended and manufactured
for the washing machines.
WARNING: Do not use soap powder.
ADJUSTMENT OF DETERGENT AMOUNT
Amount of detergent to be used depends on the laundry amount, soil degree and
hardness of water.
Do not exceed the dosages which are recommended on the detergent package in
order to prevent the excessive foam and bad rinse results, to save detergent and
to protect the environment.
Use lower amounts of detergent for a small amount of laundry or slightly soiled
items.
USE OF SOFTENER
Put the softener into the softener compartment of the detergent dispenser.
Do not exceed the (>max<) level sign on the softener compartment.
If the softener lost its fluidity, dilute it with water before putting it into the
compartment.
USE OF LIQUID DETERGENTS
If the product has a liquid detergent container
Make sure that you place the liquid detergent container into the compartment
number “2”.
If the liquid detergent lost its fluidity, dilute it with water before putting it into the
detergent container.