Archgard SALZBURG XL User manual
SALZBURG
XL
MODEL: SALZBURG XL MASONRY HEATER
Conforms To: UL 1482-2011
Certied To: ULC S627-00
S/N: D17001920 and up
CHILDREN AND ADULTS SHOULD BE ALERTED TO THE HAZARDS OF HIGH SURFACE
TEMPERATURES, ESPECIALLY THE STOVE GLASS, AND SHOULD STAY AWAY TO AVOID
BURNS OR CLOTHING IGNITION. THIS UNIT CONTAINS SMALL PARTS DURING ASSEMBLY
THAT SHOULD BE KEPT AWAY FROM CHILDREN DUE TO CHOKING HAZARD WHICH COULD
RESULT IN PERSONAL INJURY OR DEATH.
Installer: Please complete the details on the inside of the back cover
and leave this manual with the homeowner.
Homeowner: Save These Instructions for future reference.
7116 Beatty Dr
Mission, BC V2V 6B4
Canada
200-0003-03
November 16, 2016
2TABLE OF CONTENTS
GENERAL INFORMATION 3
IMPORTANT SAFETY NOTES 3
RATING PLATE LABEL 5
10
RESIDENTIAL INSTALLATION 11
13
13
15
16
16
17
20
ASSEMBLY 21
21
22
SALZBURG XL +1 31
SALZBURG XL +2 32
36
41
42
44
47
47
OPERATION 48
SAFETY EQUIPMENT 48
48
48
49
50
51
51
51
52
53
MAINTENANCE 54
54
54
54
57
58
59
60
62
63
65
3General Information
1.
2.
3.
4.
5.
6.
7.
8. WARNING! Never draw outside combustion air from a wall, oor or ceiling cavity or from any
enclosed space such as an attic or garage, carport or under a mobile home.
9.
10.
11.
12.
13.
14. Warning: It is important that you supply
a source of fresh air to your unit while burning.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
IMPORTANT SAFETY NOTES
GENERAL INFORMATION
4General Information
YOUNG CHILDREN SHOULD BE CAREFULLY SUPERVISED WHEN THEY ARE
IN THE SAME ROOM AS THE APPLIANCE.
SAFETY NOTE:
WHEN LOCATING YOUR STOVE:
Weight
SAFETY LABEL
NOTE:
INSTALLATION NOTE:
IMPORTANT
5General Information
LABEL DIMENSIONS -7 ¾” x 10”
DECNOVOCTSEPAUGJULJUNMAYAPRMARFEBJAN2018DATE OF MANFACTURE: 20172016
MODEL: SALZBURG XL MASONRY HEATER
Conforms To: UL 1482– 2011 / Certified To: ULC S627-00
LISTED SPACE HEATER, SOLID FUEL TYPE.
SERIAL NUMBER / NUMÉRO DE SÉRIE:
DO NOT REMOVE THIS LABEL
PREVENT HOUSE FIRES:
INSTALL ONLY IN ACCORDANCE WITH THE MANUFACTURER’S INSTALLATION AND OPERATING INSTRUCTIONS. CONTACT LOCAL BUILD-
ING OR FIRE OFFICIALS ABOUT RESTRICTIONS AND INSTALLATION INSPECTION IN YOUR AREA. USE 6 in (152 mm) DIAMETER MINIMUM 24
MSG BLACK OR MSG BLUED STEEL CONNECTOR WITH LISTED UL103 HT (IN USA) OR ULC S629 (IN CANADA) FACTORY BUILT CHIMNEY
SUITABLE FOR USE WITH SOLID FUELS OR MASONRY CHIMNEY. SEE LOCAL BUILDING CODE OR MANUFACTURER’S INSTRUCTIONS FOR
PRECAUTIONS REQUIRED FOR PASSING A CHIMNEY THROUGH A COMBUSTIBLE WALL OR CEILING, DO NOT PASS CHIMNEY CONNECTOR
THROUGH COMBUSTIBLE CEILING. DO NOT CONNECT THIS UNIT TO A CHIMNEY SERVING ANOTHER APPLIANCE.
MINIMUM CLEARANCES TO COMBUSTIBLE MATERIALS
MEASURE FROM HEATER FLUE CENTRE LINE
RESIDENTIAL INSTALLATION USING SINGLE WALL CONNECTOR
SIDEWALL A -254 mm / 10” D -838 mm / 33”
BACKWALL B -200 mm / 4” E -508 mm / 20”
CORNER C -102 mm / 4” F -724 mm / 28.5"
TOP G -406 mm / 16”
INSTALLATION USING LISTED DOUBLE WALL CONNECTOR – RESIDENTIAL CLOSE CLEARANCE
SIDEWALL A -254 mm / 10” D -838 mm / 33”
BACKWALL B -102 mm / 4” E -432 mm / 17”
CORNER C -102 mm / 4” F -724 mm / 28.5"
TOP G -406 mm / 16”
FLOOR PROTECTION
If installed on a combustible floor, the need to provide a non-
combustible floor protector covering the area beneath the
space heater and extending to at least 25” (635 mm) on the
firing side and at least 8” (200 mm) on the other sides or to the
adjacent wall. In addition the area extending in front of the
door must have and R value of 8.33@500 °F.
Refer to Canadian CSA B365 and USA NFPA 211 Installation
Codes for details.
CAUTION
HOT WHILE IN OPERATION -DO NOT TOUCH.
KEEP CHILDREN, CLOTHING AND FURNITURE AWAY. CONTACT MAY
CAUSE SKIN BURNS. READ NAMEPLATE AND INSTRUCTIONS.
For use with wood only. Use of other fuels may damage the heater and create a hazardous condition. Do not obstruct combustion air opening and space
beneath the heater. Operate only with firebricks in place. Risk of smoke and flame spillage, Operate only with doors fully closed. Open front door to feed
fire only. Do not use grate or elevated fire, build wood fire directly on hearth. DO NOT OVERFIRE -IF HEATER OR CHIMNEY CONNECTOR
GLOWS YOU ARE OVERFIRING. Inspect and clean chimney connector frequently, under certain conditions of use creosote build-up may occur
rapidly. Keep furnishings and other combustibles materials away from heater. Replace glass only with ceramic glass. Combustible floor may be protected
by non-combustible material extending beneath the heater and to the front and sides as indicated or to the nearest permitted combustible material.
Manufactured by: ARCHGARD INDUSTRIES LTD.
MISSION, BC ~ CANADA Made in Poland
303-6700-01
BE SURE TO OPEN BYPASS DAMPER BEFORE OPENING FUEL DOOR
DO NOT USE CHEMICALS OR FLUIDS TO START THE FIRE
DO NOT BURN GARBAGE OR FLAMABLE FLUIDS SUCH AS GASOLINE,
NAPTHA OR ENGINE OIL
DO NOT INSTALL IN A MOBILE HOME
SIDEWALL
BACKWALL
BAD
E
ADJACENT WALL
SIDEWALL
F
C
4”
8”8”
25”
FRONT
SIDE
SIDE
G
BACKWALL
RATING PLATE LABEL
SAMPLE
6General Information
Weight
IMPORTANT
Bypass Damper
Flue Damper
Air Inlet
Damage
Cleaning the Smoke duct System
7General Information
Ash and Ash Pan
Floor Protection
Chimney Connection
CAUTION:
Install chimney according to chimney
manufacturer’s instructions. The performance
of your woodstove is largely dependent on the
chimney system. Too short a chimney can cause
dicult start-ups, dirty glass, smoking problems
when the door is open, and even reduced heat
output. Too tall a chimney can cause excessive
draft which can result in very short burn
times and excessive heat output and possible
overheating of the stove.
Warning
This product is not compatible with top mount
concrete chimney. The replace is not to be used
to support the weight of the chimney.
Sealant
8General Information
Polishing
Tiles
Tile, stones, or mortar cannot be thicker
than 3/4” around the door handle as it will impact
operation of the door handle.
Please note that the air gap between the door
frame and the surround must not be lled with
sealant, mortar etc.
Caution: all adhesive and mortar must be cured
before burning in the replace to avoid unsealed
areas.
Thermotte® (brick panels)
Please note:
Failure to follow the guidelines for curing can
cause the elements to crack (see Page 48 for
curing process).
Warning
NEVER
Fig 77b
A. Smoke bae
B. Bottom plate front
C. Lateral plate left
D. Lateral plate right
E. Bottom plate left
F. Bottom plate right
G. Backplate left
H. Backplate right
9General Information
Before Installing a new replace
Archgard Industries is not responsible
for incorrect installation.
Chimney Draft
The draft increases when:
•
•
•
Important to check
(please note that this list is not exhaustive):
•
•
•
•
•
Warning
NEVER use impregnated wood, painted wood, plywood, chipboard, rubbish, milk cartons,
printed material or similar. If any of these items are used as fuel the warranty is invalid.
Common to these materials is that during combustion, hydrochloric acid and heavy metals
can form that are harmful to the environment, you and the insert. Hydrochloric acid can also
corrode the steel in the chimney or masonry in a masonry chimney. Also, avoid ring with
bark, sawdust or other extremely ne wood, apart from when lighting a re. This form of fuel
can easily cause a ashover that can lead to temperatures that are too high.
WARNING
10 General Information
Technical Specications
0"
137°C 276°F
XL +1 114°C 237°F
XL +2 110°C 230°F
XL +1
XL +2
13307 BTU
13990 BTU
14672 BTU
12 Pa
XL
XL +1
XL +2
11Installation
RESIDENTIAL INSTALLATION
CAUTION:
Install chimney according to chimney manufacturer’s instructions. The performance of your
woodstove is largely dependent on the chimney system. Too short a chimney can cause dicult start-
ups, dirty glass, smoking problems when the door is open, and even reduced heat output. Too tall
a chimney can cause excessive draft which can result in very short burn times and excessive heat
output and possible overheating of the stove.
CAUTION:
Note:
12 Installation
11. Do not connect this unit to a chimney serving another appliance.
in USA.
13Installation
Chase Enclosure
Masonry Chimney
System A:
14 Installation
MASONRY CHIMNEY (cont’d)
System B:
System C:
System D:
15Installation
Minimum Chimney Heights
These are code requirements and cannot guarantee a suitable draft
Examples:
a)
b)
Recommended Flue Height
Elevation Example a) Example b)
Elevation (FT)
ABOVE SEA LEVEL
# OF ELBOWS
0
12.0 13.0 14.0 15.0 18.0 16.0 20.0
12.5 13.5 14.5 15.5 19 16.5 21.0
13.0 14.0 15.0 16.0 19.5 17.0 21.5
13.5 14.5 15.5 17.0 20.0 18.0 22.5
14.0 15.0 16.0 17.5 21.0 18.5 23.0
14.5 15.5 17.0 18.0 21.5 19.0 24.0
15.0 16.0 17.5 18.5 22.5 20.0 25.0
15.5 16.5 18.0 19.0 23.0 20.5 25.5
16.0 17.0 18.5 20.0 24.0 21.0 26.5
16.5 17.5 19.0 20.5 24.5 22.0 27.0
16 Installation
Vent Specications
Single Wall:
Double Wall:
Chimney:
Slip Connector
Important:
pipe.
MIN
17Installation
Dimensions
Viewing Area
Salzburg XL
18 Installation
Salzburg XL +1 Dimensions
Salzburg XL +2 Dimensions
19Installation
Note
The side where the damper
controls are located require a
minimum of 16” clearance to
any wall for full movement of
adjustment rods.
20 Installation
Clearances
Top View
8"
8"
8"
25"
HEARTH PROTECTION
Note:
16"
Table of contents
Other Archgard Indoor Fireplace manuals
Archgard
Archgard Marquis AGDVT-38D User manual
Archgard
Archgard 27-DVIE22 Owner's manual
Archgard
Archgard Euro 65 Owner's manual
Archgard
Archgard 25-BVI20N-2 Owner's manual
Archgard
Archgard NORTHFIRE 3400 3400-DVTR20N-2 SN 8605 User manual
Archgard
Archgard Pele 345 Series User manual
Archgard
Archgard EURO-25 User manual
Archgard
Archgard 22-DVIE22LN-1 User manual
Archgard
Archgard DV - 520 Owner's manual
Archgard
Archgard CHALET 1600I Owner's manual
Archgard
Archgard Chantico 31 User manual
Archgard
Archgard 72-DVTE30P-2 User manual
Archgard
Archgard Optima 72 User manual
Archgard
Archgard EURO 25-1 User manual
Archgard
Archgard Sereno 41 User manual
Archgard
Archgard 31-DVIM33 Owner's manual
Archgard
Archgard 22-DVI24N-3 User manual
Archgard
Archgard EURO 25 --1 Operating instructions
Archgard
Archgard NorthFire-DVT36E User manual
Archgard
Archgard NORTHFIRE 3400 User manual
Popular Indoor Fireplace manuals by other brands
FMI
FMI ES401 Owners manual and installation manual
HWAM
HWAM I 30/65 user manual
Bronpi
Bronpi SERIE HYDROBRONPI Instructions of utilization
Wood-Free
Wood-Free WIS33NTW Installation and operator's manual
FireplaceXtrordinair
FireplaceXtrordinair ProBuilder 42 CleanFace installation manual
Mendota
Mendota ECHO Series Homeowner's manual
Chinook Fireplaces
Chinook Fireplaces SBI-30A Homeowner and installation manual
ARDES
ARDES AR372 Instructions for use
Hearth & Home
Hearth & Home Simplifyre SFE-26 Homeowner's installation & operating manual
Travis Industries
Travis Industries Lopi owner's manual
Lennox
Lennox ELITE SERIES LA41CF installation instructions
hergom
hergom C-16/80 Installation, use and maintenance instructions
Napoleon
Napoleon GDS60-N Installation and operating instructions
Mendota
Mendota FV44I Gen 3 Assembly, installation and operating instructions
Dimplex
Dimplex Mini Mozar DFP15-1131 Service manual
Napoleon
Napoleon LHD45P Installation and operating instructions
Baxi
Baxi 740FS owner's guide
Global Fires
Global Fires Corda Plus instruction manual