Archive Comicbook box - Long User manual

FOLDING INSTRUCTIONS
Comicbook box - Long
1Starting with the lid. Lay your box out
at. Familiarise yourself with the
numbered aps
2Fold the aps marked (1) inward. 3Fold the long side folds marked (2)
inward so fold (1) meets in the centre.
4Take ap (3) and fold it inward so it
meets the back of aps 1. 5Fold ap (4) over the top of aps (1) so that
the tab clicks into place 6Complete steps 2 - 6 on the other end
of the box to complete the lid.
3.
1.
1 of 3For more info visit archiveboxes.com.au 1300 889 837

7Take the box atpack and open it
as shown. Fold ap (1) inward, into the box 89
2 of 3
FOLDING INSTRUCTIONS
Comicbook Box - Long
For more info visit archiveboxes.com.au 1300 889 837
2.
3.
3.
2.
10 11 12 With aps (3) in place at each side. Push
ap (1) down so that it sits at the bottom of
the box.
1.
Fold the side aps labelled (3) inward so that they
meet at the centre of ap (2)
Push ap (1) against the inside of the box. Then,
fold ap (2) down into the box. Make sure aps (3)
are folded in before you push ap (2) down
Rotate the box so that ap (2) sits on the
bottom.
Keeping ap (1) against the side of the box, reach
into the box and pull up aps (3) so that they allign
with the handles on the box.
3.
3.
1.
1.
FOLDING INSTRUCTIONS
Comicbook Box - Long
13 With the main box complete, take the inner
at pack and fold all the aps inward into a
box shape. 14 Slide the inner container into the larger
container. 15 Take the rivets (x4) and align them on either side of the holes towards the centre of the box. Push them together
and until they click and lock in place. This will securely
attach the inner box to the outer box.
16 Attach the rivets on both sides of the
container so that the inner container is
secured and now your box is complete.
3 of 3For more info visit archiveboxes.com.au 1300 889 837