AREBOS AR-HE-BSR Product information sheet

Original User Manual –AREBOS Robotic Pool Cleaner
1
Robotic Pool Cleaner
AR-HE-BSR
Please follow all security measures in this user´s manual to ensure a secure use.
Thank you for trusting in AREBOS.

Original User Manual –AREBOS Robotic Pool Cleaner
2
Table of Contents
1Introduction and safety instructions....3
2Scope of delivery.................................7
3Operating the Robotic Pool Cleaner ....8
4Maintenance and storage..................11
5Troubleshooting................................13
6Technical Data ..................................14
7Environmentally friendly disposal .....15
EU Declaration of Conformity...............16

Original User Manual –AREBOS Robotic Pool Cleaner
3
Thank you for purchasing our product. Please read the operating instructions carefully before using
the product for the first time. If you give the product to a third party, this manual must be handed
over with it. Keep the instruction manual for future reference. The drawings in this manual may
not match the physical objects. Please refer to the physical objects.
1Introduction and safety instructions
Introduction
•This instruction handbook is intended to familiarise you with the installation, use and
maintenance of the product. To install the unit safely and correctly, please read the operating
instructions before you start.
Explanation of the symbols
Warning! Read the safety instructions carefully. Failure to follow the safety
precautions could result in serious injury or damage. Keep the operating
instructions in a safe place.
Note! Pull out the mains plug.
Warning! Risk of electrical voltage!
Use with caution when using this article!
WARNING! This signal symbol/word indicates a hazard with a medium level of risk which, if not
avoided, may result in death or serious injury. injury if not avoided.
CAUTION! This signal symbol/word indicates a hazard with a low level of risk which, which, if not
avoided, may result in a minor or moderate injury. injury if not avoided.
Note! This signal symbol/word warns you of possible property damage.
This product must not be disposed of with household waste!
By means of a CE marking, it can be recognized that a product complies with
the legal requirements of European legal standards and therefore may be
traded within the European Community.

Original User Manual –AREBOS Robotic Pool Cleaner
4
Dear Owner: Thank you for choosing robotic pool cleaner. In order to achieve optimal performance,
please read and follow these steps:
1. Cleaner filter bags should be thoroughly cleaned after each use or as often as needed to ensure
cleaner’s optimal performance.
2. Before using your cleaner and especially when opening the pool for the first time remove
larger items from the pool that may diminish the cleaner’s performance. Clean filter bags
frequently when pool is excessively dirty.
3. Cleaner may stop in the middle of the pool and reverse during cleaning cycle. This is a normal
part of the programmed cycle.
4. DO NOT start cleaner out of the water. Power button should only be switched to "I" position
when unit is submerged. The unit will automatically shut off, but it is best to put power switch
in "O" position when unit completes cleaning.
5. The electric supply connection shall be made by a qualified electrician and comply with IEC
60364-1. It is recommended that the electric supply to this machine should include either a
residual current device that will interrupt the supply if the leakage current to earth exceeds 30
mA for 30 ms or a device that will prove the earth circuit.
6. The power supply box (including safety isolated transformer) of swimming pool cleaner must
be located at minimum 3.5 meters away from the pool edge and minimum 2.5 meters overtop
of top edge of pool (outside Zone 1 defined in IEC 60364-7-702).
7. The length of the supply cord of power supply box is maximum 0.5 meters.
CAUTION!
1. This appliance can be used by children aged from 8 years and above and persons with
reduced physical, sensory or mental capabilities or lack of experience and knowledge if they
have been given supervision or instruction concerning use of the appliance in a safe way and
understand the hazards involved. Children shall not play with the appliance. Cleaning and
user maintenance shall not be made by children without supervision.
2. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or
similarly qualified persons in order to avoid a hazard.
3. The pump must be supplied through a residual current device (RCD) having a rated residual
operating current not exceeding 30 mA.
4. Do not operate the cleaner when people are in the pool.
5. CAUTION! The control box of the appliance must be fixed to the ground or the wall
securely! Never operate the unit without fixing the control box first!
6. CAUTION! The control box must be fixed at a minimum distance of 3.5m from the edge
of the swimming pool!"
7. CAUTION! The appliance is only to be used with the power unit provided with the
appliance.

Original User Manual –AREBOS Robotic Pool Cleaner
5
Important safety precautions
•Your safety is of the most importance to us. Please make sure that you read this instruction
booklet before attempting to install and use the appliance. If you are unsure of any of the
information contained in this booklet, please contact the Retailer where you purchased your
unit.
•WARNING! Read all safety and usage instructions. Failure to follow the safety information
and instructions can cause electric shock, fire and/or serious injury. Keep all safety and usage
instructions for future reference.
•DO NOT use the product until you read the instruction manual.
•Make sure you have read the instruction manual thoroughly and understand the contents
before you start the installation.
•The instructions are in the interest of your safety.
•WARNING! Danger of suffocation! Packaging material is dangerous for children. Never let
children play with packaging material.
Attention User: This manual contains important information that will help you in operating and
maintaining this pool cleaner. Please retain it for reference.
WARNING! Before installing this product, read and follow all warning notices and instructions
which are included. Failure to follow safety warnings and instructions can result in severe injury, death,
or property damage. Consumer Information and Safety service after installed, operated and
maintained according to the information in this manual. Be sure to read and comply with all of the
warnings and cautions.
DANGER!
Risk of electrical shock or electrocution
The electrical supply to this product must be installed in accordance with all
applicable local codes and ordinances. Improper installation will create an
electrical hazard which could result in death or serious injury to pool users or
others due to electrical shock and may also cause damage to property.
WARNING!
Do not play with cleaner or cable or apply to body. Can trap or tear hair or body
parts. Cable can trip or entangle swimmers which could result in drowning.
WARNING!
The control box of appliance must be fixed securely on the ground wall. Never
operate the unit without fixing.
WARNING!
To reduce the risk of injury, do not let children use or play with pool cleaner.
CAUTION!
Before installing the cleaner, understand cleaner coverage. The cleaner was not
designed to automatically clean steps or to work under a solar cover. It was also
not designed to do initial cleanup for a new pool installation.

Original User Manual –AREBOS Robotic Pool Cleaner
6
Important safety instructions
IMPORTANT SAFETY INSTRUCTIONS
The CLEANER automatic swimming pool vacuum cleaner has been manufactured with the highest
degree of care and concern for safety. We suggest the following safety precautions become part of
your pool safety regulations:
SAVE THESE INSTRUCTIONS
1. ALWAYS PUT THE MACHINE INTO THE WATER BEFORE CONNECTING IT TO THE ELECTRICAL
OUTLET.
2. ITIS IMPORTANT FOR SWIMMERS’ SAFETY TO REMOVETHE UNIT IMMEDIATELY FOLLOWING
USE. THIS CAN ALSO IMPROVE THE OPERATING LIFE OF YOUR CLEANER.
3. BE CERTAIN THE MACHINE IS ONLY PLUGGED INTO A GROUNDED ELECTRICAL OUTLET
EQUIPPED WITH AN APPROVED AND PROPERLY OPERATING GROUND FAULT CIRCUIT
INTERRUPTER (GFCI).
4. DO NOT HANDLE MACHINE WHILEIT IS PLUGGED INTO THE ELECTRICAL OUTLET.
5. DO NOT USE AN EXTENSION CORD. THIS COULD CREATE A SAFETY HAZARD AND/OR
DAMAGE YOUR CLEANER.
6. ALWAYS STAY OUT OF THE POOL WHILE CLEANER IS IN OPERATION.
7. NEVER ALLOW PLUG TO ENTER THE POOL.
8. DO NOT OPERATE THE MACHINE OUT OF WATER. THIS WILL DAMAGE THE MOTOR SEAL
AND VOID THE WARRANTY.
9. DO NOT DRAG THE MACHINE OUT OF THE POOL AGAINST THE SIDE WALL. THIS COULD
DAMAGE UNIT AND/OR YOUR POOL WALL.
10. DO NOT BURY CORD. REPLACE DAMAGED CORDS.
11. WARNING- TO REDUCE THE RISK OF INJURY, DO NOT PERMIT CHILDREN TO USE THIS
PRODUCT UNLESS THEY ARE CLOSELY SUPERVISEDAT ALL TIMES.
12. IF THE SUPPLY CORD IS DAMAMGED, IT MUST BE REPLACED BY THE MANUFACTURER, ITS
SERVICE AGENT OR SIMILARLY QUALIFIED PERSONS IN ORDER TO AVOID A HAZARD.
While the CLEANER has been made to operate as safely as possible, we suggest you exercise
reasonable care in the handling of the vacuum and inspect the electrical cord frequently for
damage or wear, as with any other electrical appliance. After use, remove the unit and rinse with
fresh water and remove any twists that may be present in the cord.
PREVENTATIVE MAINTENANCE
In order to maximize efficiency and receive long term service of your unit, we suggest the following:
•Thoroughly rinse entire unit after use.
•Clean filter bags thoroughly after each use—a clogged filter can decrease efficiency
dramatically.
•Remove any twists in the cord after each use. Twisting should be minimal if the unit is
functioning properly. Laying cord, straightened out in sunlight is helpful.
•Avoid allowing the unit to “cool down” in the water.
•Inspect filter bags frequently. Replace when necessary.

Original User Manual –AREBOS Robotic Pool Cleaner
7
2Scope of delivery
1. Floating Power Cord
11. Wheel Axle Assembly
2. Power Cord Fixing Joint
12 Main Body Base
3. Handle Assembly
13. Roller
4. Universal Drain Assembly
14. Roller Buckle
5. Top Cover
15. Anti-bumping Wheel Assembly
6. Rotating motor
16. Wheel
7. Impeller
17. Clip
8. Screw ST4.2*16-C-H
18. Filter Basket Assembly
9. Motor Mounting Assembly
19. Control Box
10. Motor Filtration Cover Assembly

Original User Manual –AREBOS Robotic Pool Cleaner
8
3Operating the Robotic Pool Cleaner
WARNING!
Your cleaner should not be used while people are swimming in the pool.
WARNING!
The electric supply connection shall be made by a qualified electrician and
comply with IEC 60364-1. It is recommended that the electric supply to this
machine should include either a residual current device that will interrupt the
supply if the leakage current to earth exceeds 30 mA for 30 ms or a device that
will prove the earth circuit.
WARNING!
Do not allow swimmers in the pool while pool cleaner is operating.
DO NOT switch on the pool cleaner if it is not immersed in the water.
Operating the cleaner out of the water may cause severe damage and will
result in loss of warranty. Always remember to turn the power supply “O” and
unplug it from the power outlet before removing the cleaner from the pool.
GENERAL INFORMATION
Congratulations! You have got the most advanced automatic swimming pool cleaner. The robot is easy
to use, and will help you cleaning your swimming pool. Operated according to this manual, your robot
will clean your pool quickly and effectively.
PLEASE READ AND FOLLOW ALL INSTRUCTIONS CAREFULLY BEFORE PUTTING
YOUR CLEANERINTO USE.
Deterioration, discoloration or brittleness of any pool finish can be caused over time separately by, or
in combination with, age, incorrect pool water chemistry, improper installation, and other factors.
Customer hereby disclaims any and all claims, and releases Manufacturer from any and all claims for
damages to any pool plaster or vinyl liner in Customer’s pool by reason of the use and/or operation of
the Cleaner. Under no circumstances shall the Manufacturer be liable for any loss or damage, whether
direct, consequential or incidental, arising out of the use or inability to use the cleaner in customer’s
pool.
FEATURES
•The swimming pool cleaner is independently scrubs, vacuums, and filters your pool.
•No installation, no attachments. Just drop it in and turn it on. It is completely automatic.
•Electronic Self-Diagnostics and overload Protection.
•It can be serviced in all shapes of pools.
GENERAL OPERATING INSTRUCTIONS
Remove the CLEANER by placing the carton
down and removing it from the box as shown.
If the Caddy Cart is included, the CLEANER
and the Power Supply will be premounted to
the cart.

Original User Manual –AREBOS Robotic Pool Cleaner
9
1. Select the nearest 230V~ voltage AC outlet protected by RCD.
2. The control box must be fixed at a minimum distance of 3.5m from the edge of the swimming
pool and minimum 2.5 meters overtop of top edge of pool (outside Zone 1 defined in IEC
60364-7-702). Never operate the unit without fixing the control box first. The length of the
standard CLEANER cable is 42 feet.
3. To optimize the life of the Cleaner Cpmtrol Box we suggest hanging the Control Box from a
fence ,shed or post.Simply attached the bracket to asolid surface useing the hardware
provided.
4. Connectthe floating cable to the power supply
control box.Use only the original Power Supply
manufactured by Splash. Connectthe floating
cable to the control box as follow photo.
Makesure they are connectedcorrectly.
(The fitting on the cleaner floating cable
should be connected with the control box
by turn at the clockwisedirection).
5. Place the CLEANER in the pool. It will slowly sink to the bottom of the pool as the air inside is
released.
6. Connect the power supply to the GFCI protected outlet and switch it on. The CLEANER will run
according to the proceduresset to do the cleaning cycle.
CAUTION! DO NOTswitch on CLEANER when the CLEANERis out of water. This may result
in damage to the pump and drive motor seals, which will VOID the warranty.
7. Choose the program and start:
a. To turn the power supply ON, press and release the power button once.
b. To turn the power supply OFF, press and release the power button. Light will turn OFF.
c. The power supply has2 settings. Each setting is determined by the pool size and
cleanliness as well as for how long you would like to run the cleaning cycle.
d. You have an option for CYCLE I and CYCLE II, CYCLEI is for SMALL POOL and CYCLE II is
for LARGE POOL, press the button to get your correct setting.
e. After setting, press STRAT button to start the machine.
f. If you would like to change the cycle mode during the machine is working, press STOP
first, then select the cycle mode you need, after 5 seconds, press START again.
Should a second cleaning cycle be required, switch OFF the power supply for 5 seconds and restart.

Original User Manual –AREBOS Robotic Pool Cleaner
10
8. After the pool has been cleaned, switch OFF the power supply before removing the CLEANER
from the pool.
9. Remove the CLEANER from the water at the shallow end of the pool by pulling the cable until
the CLEANER reaches the surface. Then lift it out of the water using the handle, NOT the cable.
10. Do not operate the cleaner when people are in the pool.
11. The appliance is only to be used with the power unit provided with the appliance.
CAUTION! When pulling the cable, reel it in hand-over-hand, DO NOT reel it around your arm.
The floating cable should be straight before and after work.
DO NOT ENTER THE SWIMMING POOL WHENTHE CLEANERIS OPERATING
The operating water temperature range for the CLEANER is 10°C - 35°C.
The operating depth of CLEANER is minimum 0,5m , maximum 3m.
Remove the CLEANER from the pool after each use. Keeping the CLEANER permanently in the pool may
result in additional service requirements.

Original User Manual –AREBOS Robotic Pool Cleaner
11
Directional Angle adjustment
The cleaner has two outlets and the direction angle of each outlet is adjustable during running. If the
angle is not satisfying, stop the cleaner, unscrewed the screw as shown in the figure, manually adjust
to a proper position (angle dimension: 0 < 1< 2); after adjusting, tighten the screws.
4Maintenance and storage
Clean the filter bags after each use:

Original User Manual –AREBOS Robotic Pool Cleaner
12
Filter cleaning solution can be used to remove excessive dirt and/or sand.
Remember: The cleaner your filter is, the more efficient the CLEANER will perform.
Periodic Cleaning of Moving Parts
WARNING! Disconnect the power supply from electrical outlet before
cleaning moving parts.
•Inspect the venture to ensure that no debris or hair has clogged the impeller.
•The impeller can be cleaned by spraying it with a garden hose.
Remove any debris that has accumulated on the wheels
Storage
When out of the water, store the CLEANER in a dry, shady location at temperatures between 4°C and
46°C.
Cable Care
With continued use, the cable may become coiled (like a telephone cord). To correct this, periodically
stretching the cord out in the sun should remove any cord twists.
IMPORTANT: The cable should be checked periodically for any external damage.

Original User Manual –AREBOS Robotic Pool Cleaner
13
Important Tips
•Cleaning the filter bags after every use maximizes the unit’s performance.
•Replace worn brushes.
•In a pool with usually high calcium content, more frequent cleaning of the filter is
recommended.
•Save the CLEANER original carton for extended storage or shipping requirements when
CLEANER require dealer service.
•The sealed Motor Unit and the Power Supply contain no user-serviceable parts.
•Opening them will automatically VOID your warranty.
•Remove items such as thermometer, toys and the like from the pool before operating the unit.
Such items can jam the cleaner and cause damage to the unit and/or your pool.
5Troubleshooting
If CLEANER fails to pick up fine or heavy debris:
•Clean the filter bags. It may be clogged. A filter cleaning solution can be used to remove
excessive dirt and/or sand.
If CLEANER starts working momentarily but then stops working:
•Impeller may be clogged or jammed with debris. Check and clean if necessary, following the
instructions in the maintenance section.
•There are 2 inlets located at bottom of the cleaner and near the brushes. Inlets located next
to the brushes help collect debris such as leaves and sand better than single inlet.
•For the cleaners used in areas that have a lot of sand the cleaner may need to be rinsed with
water at the main body base and may need rinsing at the cover and outlet to allow free
operation.
•During the normal operating cycle of the cleaner, the unit will rise to allow the unit to clear
obstacles, such as elevated main drains and stair steps.
If a cleaner has poor coverage of the pool in one cycle or only covers a small area, check the filter and
clean if necessary and make sure the unit is not getting caught on drains, floor cleaning heads or toys.
The user may try starting the cleaner in different locations to find the optimum cleaning location.
If debris falls from cleaner while removing from pool, it may be caused by filter overload, increase
frequency of filter cleaning. Assure that there is no large debris blocking any of the two inlets. Large
debris must be removed from the pool before using machine. If drain flaps are out of place or stuck by
sand or leaves in the open position, the flaps can be snapped back into place, after cleaning the area.
Avoid dropping or throwing machine into pool. Place cleaner away from the pool wall but do not throw
the cleaner in the pool.
If the location cord gets twisted which can be caused by the cleaner working for too long time, it can
be straightened by laying the location cord at full length, if possible, in the sun; heat from the sun will
help reduce the twisting.
If a high level of debris is visible through the outlet, remove cleaner quickly from the water to reduce
the chance of the debris escaping the filter bag and reentering the pool.

Original User Manual –AREBOS Robotic Pool Cleaner
14
6Technical Data
Product Model
AR-HE-BSR
Article Number
4260627428533
Current Consumption
0.7 amps
Weight
7.1kg
Interconnection cable Length
13 meters
Materials
High Impact ABS- Metal Parts of Stainless Steel
The depth of the pool
3m ≥ H ≥ 0.5m
Motor Unit
PUMP
PCB
Speed (rpm)
4500
-
Voltage
21V DC
3.3V DC
Current (amp)
5.6
-
Waterproof Sealing
Double Redundant Radial Shaft Seals.
Overload Protection
Electronic Overload Monitoring w/auto-shutoff.
Filter
Type
Removable, Re-Usable
Cleaning Routine Control
Type
Adaptive Seek Control Logic (ASCL”) Microprocessor
Cleaning Cycle
CYCLE I CYCLE II
Drive System
Thrust drive
Power Supply
Input Primary Voltage
230 Volt AC
Output Secondary Voltage
24V DC
Rated Output Current
5.6 amps
Weight
2.1 kg
Shipping
ROBOTIC Pool Cleaner
Length
Width
Height
Carton Dimensions (mm)
690
360
485
Shipping Weight
14.22 kg
We reserve the right to make technical and optical changes to the article in the course of product
improvements.

Original User Manual –AREBOS Robotic Pool Cleaner
15
7Environmentally friendly disposal
WARNING! Danger of suffocation! Packaging material is dangerous for children. Never let
children play with packaging material.
Disposal and packaging
•The packaging of your unit consists of materials that are necessary to guarantee effective
protection during transport. These materials are fully recyclable and therefore reduce the
environmental impact. Dispose of the packaging in a bin for recyclable materials.
Disposal of old equipment
•Old appliances must be disposed of in accordance with the guidelines and regulations of the
local waste disposal authority. Check with your local administration for the address of the
nearest recycling centre and deliver your appliance there.
The symbol of the crossed-out dustbin on a Waste electrical or electronic
equipment indicates that it must not be disposed of with household waste at
the end of its life. Collection points for waste electrical and electronic
equipment are available free of charge in your area. You can obtain the
addresses from your city or local government. You can find out about other
return options created by us on our website www.arebos.de.
The separate collection of Waste electrical or electronic equipment is intended
to enable the reuse, recycling or other forms of recovery of Waste electrical or
electronic equipment and to avoid the negative consequences of disposal on the
environment and human health.
Our customer service number: Tel. [phone]
Fax: [phone] / E-Mail: [e-mail]
Office address: Canbolat Vertriebs GmbH • Gneisenaustraße 10-11 • 97074 Würzburg
Return address can be found in the imprint: https://www.arebos.de/impressum/
Sales tax identification number: DE 263752326
Registration court in the commercial register is Würzburg, HRB 10082
WEEE-Reg. No. DE 61617071

Original User Manual –AREBOS Robotic Pool Cleaner
16
EU Declaration of Conformity
We, the
Canbolat Vertriebsgesellschaft mbH
Gneisenaustraße 10-11
97074 Würzburg
Germany
declare in sole responsibility that the following product:
Brand
Product Name
Robotic Pool Cleaner
Product Model
Article Number
AR-HE-BSR
4260627428533
has been developed, constructed
and manufactured in compliance
with the requirements of the
European Directives:
2014/35/EU
2011/65/EU / 2015/863/EU
The object of the declaration described above is in conformity with the relevant European Union
harmonization legislation.
The assessment is based on the
following applied harmonized
standards:
EN 60335-1:2012+A11:2014+A13:2017+A1:2019+A2:2019
+A14:2019+A15:2021
EN 60335-2-41:2003+A1:2004+A2:2010
EN 62233:2008
Other technical standards and
specifications applied:
Place and date of issue:
Würzburg, 13.09.2022
Signature:
Dipl.-Inform. (Univ.) Korhan Canbolat, Managing Director
If the device is modified without our consent, this declaration of conformity loses its validity.