Arm's Reach The Mini Co-Sleeper Ezee 2 in 1 User manual

Bedside Sleeper Free-Standing Bassinet
by Arm's Reach
®
Co-Sleeper

2
WARNING:
Failure to follow these warnings and instructions could result in serious injury or death.
SUFFOCATION HAZARD: Discard all packing materials immediately after opening. Plastic bags and
ties may cause suffocation or choking.
Read all instructions BEFORE assembly and USE of this product.
FALL HAZARD - To help prevent falls, do not use this
product when infant begins to push up on hands and
knees or has reached manufacturer’s recommended
maximum weight of 18 lbs, whichever comes first.
SUFFOCATION HAZARD
Infants have suffocated
In gaps between extra padding and side of
bassinet/cradle, and
On soft bedding
Use only the pad provided by manufacturer.
Never add a pillow, comforter or another
mattress for padding.
If a sheet is used with the pad, use only the one provided
by Arm's Reach .
To reduce the risk of SIDS, pediatricians recommend
healthy infants be placed on their backs to sleep,
unless otherwise advised by your physician.
A bedside sleeper is designed to provide a sleeping
area for an infant until he or she begins to push up on
hands and knees or approximately 5 months of age.
Move your child to another sleeping product when your
child reaches this stage.
—To prevent death from entrapment,
bedside sleeper must be properly secured to adult bed
using the attachment system.
-There must be no more than ⁄2 in. (13 mm) gap
between bedside sleeper and adult bed.
- Check tightness before each use by pulling bedside
sleeper in a direction away from adult bed.
-If gap exceeds ⁄2 in. (13 mm), DO NOT use product. Do
not fill the gap with pillows, blankets or other items that
are suffocation hazards.
Always read and follow assembly instructions for each
product use mode (bedside sleeper, bassinet, play yard).
Always use ALL required parts for each use mode.
Check instruction manual for a list of required parts.
Periodically check product for loose, damaged, or
missing parts.
The anchor plate and straps assembly must always
be used in bedside sleeper mode.
®
Entrapment Hazard
1
1
Never use this product if there are any loose or missing
fasteners, loose joints, broken parts, or torn mesh/fabric.
Check before assembly and periodically during use.
Contact Arm's Reach Concepts, Inc. for replacement
parts. Never substitute parts.
Assemble product according to manufacturer's
instructions for ANY use mode—bedside sleeper as
well as the bassinet.
To avoid death from the infant's neck being caught on
the top rail on the side that is next to the adult bed, the
top rail must be no higher than the adult bed mattress.
Never permit bedding from the adult bed to extend into
the Bedside Sleeper
NEVER LEAVE your infant unattended in the Arm's
Reach Co-Sleeper bedside bassinet.
®®
Strings can cause strangulation! Never place items
with a string around a child's neck such as hood strings
or pacifier cords. DO NOT suspend strings over the unit
in any configuration or attach string to toys.
NEVER LEAVE infant in product without the TOP
HORIZONTAL RAIL installed in the upper most position,
unless securely attached to the adult bed.
Always check to be sure that the upper locking bars
and the lower locking bars are in their “locked position”
before placing the infant in the Arm's Reach Co-Sleeper
®®
bedside bassinet.
NEVER USE more than 3-2” (5CM) leg extension segments
with the Arm's Reach bassinet.
®
Co-Sleeper bedside
®
ONLY use leg extensions on the Co-Sleeper bedside
®
bassinet when it is attached to the parental bed.
NEVER use plastic shipping bags or other plastic film
as mattress covers not sold and intended for that purpose.
They can cause suffocation.
Make sure all straps are secured and tight when
used in the co-sleeping position. Tighten straps periodically.
STRANGULATION/SUFFOCATION HAZARD: The top edge
of the lowering bar must be level with or below the top of the
adult mattress when used as an Arm's Reach Co-Sleeper .
®®
The level of the Arm's Reach
®
Co-Sleeper bedside bassinet
®
mattress must be a minimum of 4 inches below the top edge
of the lowering bar. NEVER raise the level of the Arm's
Reach Co-Sleeper bedside bassinet mattress.
®®
NEVER USE the Arm's Reach bedside
®
Co-Sleeper bassinet
®
in Co-Sleeper position without the anchor plate attached and
locked as shown. Failure to use this anchoring system could
result in serious injury or death to the infant.
Make sure all straps are secured and tight. Check straps
before each use.
Failure to use this securing system will allow the Arm's Reach
®
Co-Sleeper bedside from the adult
®
bassinet to move away
bed and could result in the infant falling out of the Co-Sleeper
®
bedsi e bassinet.d

3
Read all instructions BEFORE assembly and USE of this product.
STRANGULATION HAZARD: When anchor plate and
strap assembly are not in use, store in a safe place
not accessible to children.
DO NOT place product near a window where cords
from blinds or drapes may strangle a child.
Keep the bassinet away from stoves, heaters,
campfires and other hazards.
DO NOT allow children to climb or play on or under
unit in any configuration.
FALL HAZARD: Remove infant from the Arm's Reach
bassinet before starting any
conversions.
®
Co-Sleeper bedside
®
Always make sure all top and bottom rails are securely
locked, in all configurations, before putting an infant
/child into the unit.
WARNING – To prevent serious or fatal injury from
falls always keep child within arm's reach. Never leave
your child unattended.
Do Not remove warning labels.

Parts List
A. Fitted Sheet 1 pc
4
B Mattress 1 pc.
C Mattress Support Bars 4 pcs.
(Provides flatness)
Frame
D. Plastic Receiver
E. Mattress Support-straps
(Prevents Sagging)
F. Plastic Connector
G. Lowering Rail
H. Foot strap
I. 2 Inch Leg Increments 3pcs
J .Wheels 2 pcs
K. Carry Bag 1 pc
L. Anchor Plate and Strap 1 pc

WARNING: Failure to follow these warnings and
instructions could result in serious injury or death.
Step 2
Note: Center of floor MUST be raised for top rails to lock.
Lock all top rails in place by pulling up on the center of each
rail.
They should be rigid when they are all locked.
Step 3
Note: Always keep the release strap under cover. Secure
Velcro on all sides to avoid unintended collapsing of the
product.
Push down the center of floor through the hole on sleeping nest
bottom, allowing bassinet to spread out and lock. Check that
top rails are securely locked in position until you hear it click into
place and push down gently.
Enclose the red release strap with the flap cover.
®
How to set up the Arm's Reach Co-Sleeper bedside bassinet
®®
Step 1
Remove product from the carry bag (K).
Undo the Velcro straps of mattress (B).
Set mattress aside.
®
Step 4
Note: Do not forget to install the leg increment of the
middle leg.
Install the wheels and leg increments as figure shown.
Step 5
Install Mattress Support Bars (C) in fabric tunnels on the
nest floor. Place sheet (A) on mattress (B) and lay mattress
into sleeping nest.
The sheet (A) and sleeping nest bottom have Velcro tabs
underneath that align for added security.
It is in Co-Sleeping position now. Go to page 8 to attach the
bedside bassinet to adult bed.
®
5
!WARNING: SUFFOCATION HAZARD - To help
prevent suffocation and entrapment, use ONLY the mattress
pad provided by Arm's Reach Concepts, Inc. NEVER use
additional padding or mattress. DO NOT use shipping or other
bags as mattress covers since they can cause suffocation.

How to set up as freestanding bassinet
FALLING HAZARD:!Remove infant from this
product before starting any conversions.
Step 1
Note: The left and right side plastic connector pieces
must be slide upward at the same time, so that the
lowering rail (G) can be raised smoothly.
Release 3 mattress support-straps (E) that go over the
lowering rail.
Insert foot into the red foot strap under the center of front
bottom, find the locking button under the plastic connectors
(F) on the left and right sides, press them upward to unlock
and slide the lowering rail (G) upward until you hear a "click"
and they are locked in place automatically.
Step 2
Insert the buckles of the mattress support-straps (E) into
hidden pockets.
6
Attach the Velcro on the inside of the lowering rail as
picture.
®
It is in freestanding bassinet now.

How to convert to the co-sleeping position from the freestanding bassinet
FALLING HAZARD:Remove infant from this
product before starting any conversions.
Note: The left and right side plastic connector pieces
must be slid down at the same time, so that the top
rail can be lowered smoothly.
WARNING: THIS STEP PREVENTS THE
MATTRESS FROM SAGGING. Make sure the 3
buckle-straps are connected over the lowered
rail, so the mattress support floor can be taut
and even.
Step 1
Find the locking button under the plastic connectors on the
left and right sides, press them upward to unlock and slide
down the top bar until you hear a "click" and they are locked
in place automatically.
Step 2
Pull out buckles of mattress support-straps (E) from the
pockets. Pull strap up and over lowering rail (G) and connect
on front of lowering rail (G).
7
WARNING: STRANGULATION/SUFFOCATION
HAZARD:The top edge of the lowering rail must be level
with or below the top of the adult mattress when used in
the bedside bassinet mode. The level of this product
mattress must be a minimum of 4 inches below the top
edge of the lowering rail. Never raise the product's
mattress to be level with, or above the top of the lowered
rail.
4'' minimum4'' minimum
It is now in Co-Sleeping position.

WARNING:
WARNING :STRANGULATION/ CHOKING HAZARD
DO not allow excess strap (or any other loose object) to find it's way into this product. Do Not allow excess
strap to lay loose on floor because someone may trip over it.
WARNING: Failure to use this securing system will allow the product to move away from the
adult bed and could result in infant falling out of the product. NEVER leave infant unattended in this
product.
NEVER USE the product in bedside bassinet mode without the anchor plate and
strap (L) attached to the adult bed. Failure to use this anchor plate and strap could result in serious
injury or death to the infant. Make sure all anchor straps are secured and tight. Check straps before
each use.
UNACCEPTABLE BED,
MATTRESS,BOXSPRING&FRAME NOT IN-LINE
Frame Extended
ACCEPTABLE BED FRAME IN-LINE
Mattress, Boxsprings &
Frame aligned
Never use the
co-sleeping position without the anchor
plate and securely attached to the adult bed.
Arm's Reach Co-Sleeper bedside
bassinet in
®®
Loop
Buckle
8
The top edge of the LOWERING RAIL when used in co-sleeping position must be level with or below the top
of adult mattress.
Measure adult bed from floor to top of mattress. If measurement is more than 24", a leg extension kit will be
needed to ensure proper height and maintain safety. 1 Leg Extension Kit will raise the Co-Sleeper up to 6
additional inches in 2" increments accommodating beds 26", 28" and 30". NEVER use more than 1 extension
kit. Do not use leg extensions when the product is NOT attached to the adult bed.
Slide the anchor plate and straps under the mattress, placing the anchor plate flush against the mattress on
the opposite side from this product.
Connect both straps to each short side of the bassinet by passing the male buckle through the “belt loop” at
the front leg of the product and then connect the buckle to rear leg.
Make both straps as tight as possible against the parental bed, so tight it creates a slight indentation in
mattress. To test if the product is tightly secured to adult bed, push it with hands to make sure the gap is no
more than ½”(13mm). If more than ½”(13mm), readjust strap to pull tighter.
When bassinet is tight and ready to use, roll the excess strap up and secure it with elastic loop.
Always tighten straps before each use.
®
It is recommended to make the strap shorter than the width of the mattress to ensure the Co-Sleeper
is pressed securely against the parental bed, without any gaps.
®
How to attach the Arm's Reach Co-Sleeper bedside bassinet to adult bed
®®

STRANGULATION HAZARD!:When anchor plate and
strap assembly are not in use, store in a safe place not accessible
to children.
Step 1
Reach through the hole of Sleeping nest floor to the red release strap
under the flap cover on the center of bottom floor, pull up to collapse
the bassinet.
Remove mattress support bars (C) and mattress (B), and set aside.
Cleaning and Maintaining
Spot clean with soft clean damp cloth.
Laundering fitted sheet: Machine wash on lukewarm setting and
drip-dry.NO BLEACH.
Step 2
Unlock short top rails by raising center lock slightly, push on button
of center locks and lower top rails. Repeat steps on top rails on long
sides.
Step 3
Lift up the webbing handle strap of the bottom and push the corner
posts together until the corner posts are straight up and down and
top corner brackets contact each other.
Step 4
Remove sheet (A) off the mattress (B) and wrap the mattress around
the unit. There are Velcro straps that feed through plastic loops
attached to the back side of the mattress. Pull taut. Store the sheet
in the end of the unit.
®
Step 5
Put into carry bag (K) with the handle from the mattress (B) coming
through the opening in the bag.
1
2
How to fold the Arm's Reach Co-Sleeper bedside bassinet
®®
9

Q.
A. 1. Locate the floor-lock handle in center of the floor and lift it up as far as possible.
2. Lift top rails up to lock in place.
If you have any question or need further assistance, please call [phone] (US Only ) or
[phone].
For more trouble shooting visit our website at www.armsreach.com
“Top rails can't be unlocked?”
A. All top rails MUST be straight and locked before using. Push the top rails downward to try out if
they are locked.
B. Do not push center floor down until all four top rails are locked.
C. To fold in bassinet mode, reach through hole and pull up on floor lock.
D. When the 2” short segments need to be used on product, make sure all five segments are
assembled on, DO NOT miss the one for the center bottom leg.
E. Remove your finger from the button when the male gliding receiver is unlocked already and start
to glide. Keep pressing it at the top and bottom lock position will prevent the male receiver from
locking into the place.
Visit our website www.armsreach.com for video tutorials under the Assembly Instructions link.
You can also search You Tube for Arm's Reach Co-Sleeper for video tutorials.
®®
Important Assembly Instruction
10

201 ARM'S REACH CONCEPTS INC. ARM'S REACH. CO-SLEEPER, Mother & Child Logo and all other trademarks are rigorously protected. All rights reserved.6Patented and patent pending. Meet ASTM F2194, ASTM F2906
requirements. ARC 12-2016
201 ARM'S REACH CONCEPTS INC. ARM'S REACH, CO-SLEEPER, le logo de la mère avec l'enfant et toutes les autres marques de commerce sont rigoureusement protégés. Tous droits réservés.6Breveté et brevet en instance.
Répondre aux normes ASTM F2914, F2906 exigences. ARC 12-2016
201 ARM'S REACH CONCEPTS INC. ARM'S REACH, CO-SLEEPER, el logotipo de la madre e hijo y todas las otras marcas comerciales están rigurosamente protegidos. Todos los derechos reservados.6Patentada y pendiente
de patente. Conocé ASTM F2914, F2906 requisitos. ARC 12-2016
If you have any questions- call or write Arm's Reach Concepts, Inc.
2081 N Oxnard Blvd.,PMB#187, CA 93036-2964
fax: [phone]
www.armsreach.com
Hours: 9:00 A.M. 4:00 P.M. Pacific Time
[phone] (US Only) or [phone]
Si vous avez des questions, appelez ou écrivez à Arm's Reach Concepts, Inc.
2081 N Oxnard Blvd., PMB#187, CA 93036-2964
Fax : [phone]
www.armsreach.com
Heures : 9 h 00 à 16 h 00 (heure du Pacifique)
[phone] (USA) or [phone]
Si tiene preguntas, no vacile en llamar o escribir a Arm's Reach Concepts, Inc.
2081 N Oxnard Blvd., PMB#187, CA 93036-2964
fax: [phone]
www.armsreach.com
Horario: 9:00 a.m. - 4:00 p.m. Horario del Pacífico
[phone] (USA) or [phone]