Armatec AT 8080S User manual

Vacuum deaerator
Pneumatex Vento
Version 4, 2017-07-03
Page 1 (4)
AT 8080S
AT 8080S
produkt katalog
produkt katalog
Vacuum d eaerator
produkt katalogSidhuvud 1produkt katalog
produkt katalogPneumatex Ventoprodukt katalogVersion 4, 2017 -07-03produkt katalog
Art.
No.
R
S
K
Applicati
on
Performa
nce
Body
mater
ial
Sealing
materia
l
D
N
P
N
Tempera
ture (°C)
Operating
pressure
(bar)
F F F,R R R R R
80
80
S4
A
Deaer-
ating
Su-
presse
d De-
aerat-
ing
Stee
l
1
5
1
00-90 1-4,5
80
80
S4
A-
R
Deaer-
ating
with re-
fill
Su-
presse
d De-
aerat-
ing
Stee
l
1
5
1
00-90 1-4,5
80
80
S6
A
Deaer-
ating
Su-
presse
d De-
aerat-
ing
Stee
l
2
0
1
00-90 1-6
80
80
S6
A-
R
Deaer-
ating
with re-
fill
Su-
presse
d De-
aerat-
ing
Stee
l
2
0
1
00-90 1-6
80
80
S1
0A
Deaer-
ating
Su-
presse
d De-
aerat-
ing
Stee
l
2
0
1
60-90 5-10
80
80
S1
0A
-R
Deaer-
ating
with re-
fill
Su-
presse
d De-
aerat-
ing
Stee
l
2
0
1
60-90 5-10
Dimension range PN Temperature range Material
DN 15-20 10/16 0 °C to 90°C Steel

Version 4, 2017-07-03
Page 2 (4)
Vacuum deaerator
Pneumatex Vento AT 8080S
Rätten till ändringar utan föregående meddelande förbehålls. Armatec ansvarar inte för eventuella tryckfel eller missförstånd. Dokumenten får kopieras endast i sin helhet.
Range of application
Releases loose gas from the fluid through pressure reduction to vaccum. For de-
aerating of heating and cooling systems with high static height and/or low system
pressure. Applies especially to large and medium systems. The most effective
way of venting closed heating and cooling systems.
Our vaccum dearetors are primarily intended for use where the fluid is water. Our
larger models (S6A and S10A) can also be used in systems where the fluid is a
mixture of water/glycol (max. 40%), if control and surveillance are expanded. Do
not use salt/water mixtures.
Program text
PSF.141 Air deflector
Vacuum deaerator AT8080S-... fror heating and cooling systems. With a pump
and automatics for operation pressure ... bar and a control unit for automatic
function and gas indication.
Quality assurance
The equipment is in compliance with MD 2006/42/EG, LVD 2006/95/EG and EMC
2004/108/EG and is CE-marked.
Dimensions and weight
AT 8080S
1Automatic air deflector which removes released gas
2Degassing chamber
3Magnetic valve supply of partial flow from the system resp. filling
4Multi-stage pump for pressure retention and suppression
5Controller
6SmartSwitch senses the amount of gas, stops the deaerating at minimum level
A
Article
AT
8080S4A
AT
8080S4A-R
AT
8080S6A
AT
8080S6A-R
AT
8080S10
A
AT
8080S10A-R
A340 340 590 590 744 744
B490 490 880 880 1272 1272
C 340 340 350 350 400 400
Connec-
tion
G 1/2 x
2pcs
G 1/2 x
2pcs
G 3/4 x
2pcs
G 3/4 x
2pcs
G 3/4 x
2pcs G 3/4 x 2pcs
Weight 15 16 57 59 77 79
Dimensions in mm, weight in kg

Vacuum deaerator
Pneumatex Vento
Version 4, 2017-07-03
Page 3 (4)
AT 8080S
Function and design
Fully automatic vaccum deaerator for liquid-filled heating or cooling systems. The
liquid always contains both dissolved and unresolved gases. The unit's function
is to reduce these gases to an absolute minimum. A separate subflow from the
system is subjected to a vacuum in the unit's deaerating vessel. In this situation
the dissolved gas is released and can be diverted to the atmosphere via the air
deflector. This method provides a highly efficient deaerating in both heating and
cooling systems, even in high buildings and/or low temperatures. The deaerator
should always be mounted in the pipe's main line to get a 100% successful result
on the liquid exchange.
A subflow is taken from the system and pumped into the deaerating vessel. The
solenoid valve, which is in the inlet line, closes within a few seconds. The pump,
that still is in operation, creates a vacuum. Acc. to Henry's law (the liquids natural
solution of gas depends on pressure and temperature), the dissolved gas will be
released and separated from the liquid and acts as free gas bubbles in the top of
the deaerator chamber. In the next phase, the solenoid valve opens again, the
pressure rises and a new part flows into the exhaust gas vessel. The new flowing
subset presses the free gas blowers into the air deflector, on top of the deaerat-
ing chamber and leads them to the atmosphere via the float.
This shifting between having the solenoid valve open or closed causes the deaer-
ating process to continue and the system's fluid becomes increasingly free of dis-
solved gases. In a period of time, usually 2-3 weeks, the amount of dissolved gas
has decreased to a minimum. That´s when the built-in SmartSwitch-component
stops the deaerating process if it does not detect any gas in ten minutes. The
built-in clock does, if neccessary, activate the deaerating process at a certain pre-
set time, usually 8:00 in the morning. However, if no gas is detected, the unit re-
turns to standby mode, ready to restart 24 hours later. This smart feature
minimizes the energy demand and increases the product's life.
All models have the features presented above. The R-models also have an inte-
grated auto-filling equipment. This is controlled by preset start- and stop pres-
sures. It can also be controlled by signals from e.g. level indication on an
expansion vessel. Maximum filling amount, filling time and number of fillings can
be limited.
Technical information
Article
AT
8080S
4A
AT
8080S4
A-R
AT
8080S
6A
AT
8080S6
A-R
AT
8080S1
0A
AT
8080S10
A-R
Operating pressure
(bar) within
1,0 –
4,5 1,0 – 4,5
1,0 –
6,0 1,0 – 6,0
5,0 –
10,0 5,0 – 10,0
Systemvol. max (m3)25 25 300 300 300 300
Systemtemp. (°C) 0 – 90 0 – 90 0 – 90 0 – 90 0 – 90 0 – 90
Max. operating pres-
sure (bar) 10,0 10,0 10,0 10,0 16,0 16,0
Treated fluid (l/h) 70 70 1000 1000 1000 1000
Filling amount(l/h) -50 -450 -500
Noise level (dB(A)) 52 52 57 57 57 57
Voltage (V)
1-
phase
230
1-phase
230
1-
phase
230
1-phase
230
3-fas
400 3-fas 400
Effect (W) 100 100 800 800 1150 1150
Enclosure class (IP) 40 40 40 40 40 40

Version 4, 2017-07-03
Page 4 (4)
Vacuum deaerator
Pneumatex Vento AT 8080S
Rätten till ändringar utan föregående meddelande förbehålls. Armatec ansvarar inte för eventuella tryckfel eller missförstånd. Dokumenten får kopieras endast i sin helhet.
Accessories and options
All models are designed to work in both heating and cooling systems. Earlier
models specially made for refrigeration systems with condensation insulation are
therefore no longer necessary.
Installing
The deaerator shall be connected to the system's main line (which might be the
inlet- or outlet line). It is important that the space between the connections is at
least 500mm and that they are placed on the side of the main pipe, not at the bot-
tom or the top.
Maintenance and spare parts
Carefully study the manual, especially the parts about operating, status reports
and error messages. Attempt to fix the malfunction by studying the troubleshoot-
ing table. If the error persists, contact Armatec.
If you are about to disconnect the pressure deaerator, first make sure that the
main power switch is turned off. Close the shut-off valve in the inlet- resp. the out-
let line and an eventual filler valve. Then the deaerator can be dismantled. Be care-
ful with any water remaining in the deareating vessel.
Marking
Details on maximum pressure, temperature, electrical info, year of manufacture,
manufacturing number, type number and the name of the manufacturer are indi-
cated on the product nameplate.
How to order
AT-nr Max. systemvolume Operating pressure Refill
8080S4A 25 m31,0 – 4,5 bar No
8080S4A-R 25 m31,0 – 4,5 bar Yes
8080S6A 300 m31,0 – 6,0 bar No
8080S6A-R 300 m31,0 – 6,0 bar Yes
8080S10A 300 m35,0 – 10,0 bar No
8080S10A-R 300 m³ 5,0 – 10,0 bar Yes