
6.
Note:
Note:
· Do not use harsh
abrasive cleaners,
scouring pads or
products that are not
considered safe to use
on nonstick coatings.
· If washing in the
dishwasher, a slight
discoloration to the
Cooking Pot and
accessories may occur.
This is cosmetic only
and will not aect
performance.
· Any other servicing
should be performed
by Aroma®
Housewares.
· Wooden, heat-
proof plastic and
nylon utensils are
recommended. Metal
utensils may scratch the
nonstick surface.
· When slow cooking,
simmering or steaming
place the Tempered
Glass Lid on top of the
3-in-1 Grillet®.
7.
B F U
T C
T
1. Read all instructions and important safeguards.
2. Remove all packaging materials and check that
all items have been received in good condition.
3. Tear up all plastic bags as they can pose a risk to
children.
4. Remove and discard the red plastic sleeve on the
Temperature Control Probe.
5. Lift the Cooking Pot away from the Probe side,
then pull it away from the Cool-Touch Base. Wash
the Cooking Pot, Base and assembled Lid with
warm, soapy water using a sponge or dishcloth.
5. Rinse thoroughly to remove all soap residue.
6. Condition the nonstick surface of the cooking pan
with oil or vegetable shortening.
1. Disconnect the plug from the wall outlet, and then
remove the Temperature Control Probe from the
appliance.
2. Allow the unit to completely cool. Pull the Cooking
Pot away from the Cool-Touch Base.
3. Wash the Cooking Pot, Base and Lid with warm,
soapy water, using a sponge or dishcloth. Rinse
thoroughly to remove soap residue. For even and
faster cleanup, the Cooking Pot, Base and Lid can
be washed in the dishwasher..
4. Dry thoroughly with a soft cloth.
·The Temperature Probe is not securely connected
to the pot. Make sure the Temperature Probe is
pushed firmly into the port on the Cool-Touch Base.
If the problem persists, please contact Aroma®
customer service toll-free at (800) 276-6286 or
through email at CustomerService@AromaCo.com
for repair service.
The 3-in-1 Grillet®will not turn on
and begin heating.
A L
1. Using a Phillips-head screwdriver, remove the
screw from the Lid Handle.
2. Place the Handle on top of the lid. Make sure the
hole on the Handle and hole on the Lid line up.
3. Place the screw under the lid so it fits into the
hole from the Lid to Handle.
4. Tighten the screw into place. Be careful to not
over-tighten.
Caution:
During and after use,
the Tempered Glass Lid
and the Cooking Pot will
become very hot. Be sure
to use the handle and
wear protective oven mitts
or gloves.
To prevent food borne
illness, always make sure
food is cooked thoroughly
before serving.
U Y 3--1
G®
1. Place the Cooking Pot into the Cool-Touch Base. It
should snap securely into place.
2. Plug the Temperature Control Probe into the port in
the Cool-Touch Base.
3. Turn the Temperature Control Dial to the O
position. Plug the power cord into an available
power outlet.
4. Add food to be cooked to the Cooking Pot. If desired,
cover the pot with the Tempered Glass Lid to help
decrease cooking time and ensure even cooking.
5. Turn the Temperature Control Dial to the desired
temperature. The indicator light will illuminate.
6. The indicator light will turn o once the Cooking
Pot has reached the selected temperature. During
operation, the indicator light will turn on and
o, indicating the proper temperature is being
maintained.
7. When cooking has finished, turn the Temperature
Control Dial to the O position and unplug the
power cord from the power outlet.