Arrow Antenna 146/437-1 User manual

Page 1
911 E. Fox Farm Rd. #2
Cheyenne, WY 82007
ArrowAntennas.com
Simply the Best
[phone]
[email protected]
Arrow II Satellite Antenna
AO27 Up-link 145.580 Down-link 436.800
The Arrow II line of antennas has been engineered to provide maximum gain and efficiency in
the smallest practical size & weight. ONLY 19 oz.
Aluminum Arrow Shafts are used for elements.
The 2 in-line gamma matches (not shown) are pre-assembled & pre-tuned. One connector for
VHF and one for UHF. These are BNC only.
The boom is ¾” square (with round corners) 37 ½” long. Note the big black foam grip for easy
holding.
Boom & elements all have plastic tips for safety.
Model
146/437-10 (All Suffixes)
3 Elements for VHF
7 Elements for UHF
Guarantee
No hassle refund
If you are not completely
satisfied with any ARROW
ANTENNA Product it can
be returned for a FULL
refund less shipping and
handling within 90 DAYS
of purchase date.
SIMPLY THE BEST
We don’t invent antennas.
We simply build them better.

Page 2
Part # Price Model 146/437-10 (All Suffixes) Parts List
14643710 $20.00 Boom - with End Caps and Foam Handle (37 1/2 ")
146437BP $29.00 2 piece Boom - with End Caps and Foam Handle (37 1/2 ")
437 6.000 $18.00 437 Driven Element pair - with Gamma Match, End Caps, Inserts & Stud (6 ")
437 4.875 $ 4.00 3rd through 5th Director Element Pair - with End Caps, Inserts, & Stud (4 7/8 ")
437 5.000 $ 4.00 2nd Director Element Pair - with End Caps, Inserts, & 2 1/4 Stud (5 ")
437 5.250 $ 4.00 1st Director Element Pair - with End Caps, Inserts, & 2 1/4 Stud (5 1/4 ")
437 6.500 $ 4.00 Reflector Element Pair - with End Caps, Inserts, & Stud (6 1/2 ")
146 19.250 $22.00 146 Driven Element Pair - with End Caps Inserts, & 2 1/2" Stud (19 1/4 ")
146 17.125 $ 8.00 Director Element Pair - with End Caps, Inserts, & 2 1/4" Stud (17 1/8 ")
146 20.250 $ 8.00 Reflector Element Pair - with End Caps, Inserts, & 2 1/4 " Stud (20 1/4 ")
2.250 $ 1.00 2 1/4 " All Thread Stud for all Elements (2 for $1.)
SC 9/32 $1.00 Red End Caps For Elements (10 for $1.)
FP 125 $1.00 Black End Caps for the Boom (4 for $1.)
3128 Black $ 2.00 Black Foam Handle Grip
(Please add $8.00 S & H per order. Thank you.)
Assembly Instructions
Attach the elements to the boom as shown above by screwing the elements together through holes in the boom.
Attach feed lines to the BNC connectors. That’s it. The antenna is pre-tuned and ready to go.

Page 3
3/4"
Arrow II Hand Held Portable
(Satellite)
Model 146/437-10 (All Suffixes)
Drawing NOT to scale.
6 ½”
Aluminum Tube 7” Aluminum Tube 2”
1 ¾”
Plastic 7 ½”
Plastic 7 ½”
16 ga. Copper Wire 8” 16 ga. Copper Wire 2 ¾”
Element Spacing:
440 side: 1” 6” 11” 16” 21” 26” 32”
146 side: 1” 16” 32”
Boom Length 37 ½”

Page 4
911 E. Fox Farm Rd. #2
Cheyenne, WY 82007
ArrowAntennas.com
Simply the Best
[phone]
[email protected]
Model 10W (Low Power)
When ordered together, duplexer comes installed in the boom.
Duplexer for 146/437-10
To Radio
All surface mount components.
Maximum Power is 10 Watts.
Duplexer fits inside the boom. Coax is routed
under Foam Grip.
Guarantee
No hassle refund
If you are not completely
satisfied with any
ARROW ANTENNA
Product it can be returned
for a FULL refund less
shipping and handling
within 90 DAYS of
purchase date.
SIMPLY THE BEST
Installation:
1. Remove the foam grip and the plastic end cap from the boom.
2. Slide the Duplexer in the end of the boom at an angle. Reseat new plastic end cap.
3. Using your finger, apply some corn starch to the inside of the foam grip and to the antenna
cables and boom.
4. Slide the foam grip over the coax cables and boom as shown above.
5. Blow the corn starch off with an air can or compressed air.

Page 5

Page 6
ASSEMBLY CHECKLIST FOR OUR SHIPPING DEPARTMENT.
Circle Antenna Being Assembled:
146/437-10 146/437-10BP 146/437-10WBP
146/437-10W
___Solid Boom ___Split Boom ___Duplexer installed to match driven elements.
___10 element holes
___Hole are clear
___4 tripod holes
___End Caps
___Foam Handle Grip
___2 @ 20 1/4" elements
___1 @ 19 1/4" driven element.
___1 @ 19 1/4" non-driven element
___2 @ 17 1/8" elements
___3 studs
___6 @ 4 7/8" elements paired
___2 @ 5" elements paired
___2 @ 5 1/4" elements paired
___1 @ 6" driven element paired with 1 @ 6" non-driven element
___2 @ 6 1/2" elements paired