FIG. 10.
FIG. 11.
FIG. 12.
*Drawers may be tight with rst use, rub wax paper or
ivory bar soap lightly over drawer runners to resolve
Wood dowel x2
#10x1-1/4”
Flathead Screw x4
#10x1-1/4”
Flathead Screw x24
Assembly Instructions
SUZI Storage Sidekick Page 7
Step 8. Thread Connecting Bolts (2 total) into pre-
drilled holes in Top Drawer Front. Install Cams (2
total) in Drawer side (Kx1, Jx1) by pushing a Cam
into each, hole flush with surface (as shown in
FIG. 8).
Step 11. Attach the Knob to the Top Drawer Front (I)
using 8/32x1” Bolt (x1) for Knob (as shown in FIG. 13).
Step 9. Attach Top Drawer Sides (K,J) to Top Drawer
Front (I) and Drawer Front/Back (M). Align Drawer
Bottom grooves in Sides with Drawer Bottom groove
In Drawer Front (as shown in FIG. 9).
Slide Drawer Bottom (H) along grooves on the
Sides Into the Groove In Drawer Front (I).
Attach Drawer Back (M) to Drawer Sides (K,J),
guide Connecting Bolts into holes in Drawer Sides
(K,J), turn Cams to locked position. On the other
side, attach the Drawer sides (K,J) to Drawer Back
(M) with the #10x1-1/2” Flathead Screw (as shown
in FIG. 10).
FIG. 8.
The Drawers may now be insatalled into your cabinet.
Connecting Bolts x2
Cams x2
#8/32x1”
Door Knob Bolt x1
FIG. 9. Door Knob x1
FIG. 13.
Step 10. Attach Drawer Sides (L) to Drawer Front/
Back (M). Align Drawer Bottom grooves in Sides with
Drawer Bottom groove In Drawer Front (as shown in
FIG. 11). Slide Drawer Bottom (N) along grooves
on the Sides Into the Groove In Drawer Front/Back
(M). Attach the Drawer sides (L) to Drawer Front/
Back (M) with the #10x1-1/2” Flathead Screw (as
shown in FIG. 12).
180°
