Artcoustic 120-36 SL User manual

Two-Way Line Array Precision Monitor, with Vertical and
Horizontal Symmetrically Controlled Beamwidth Array
www. artcoustic.com

Two-Way Line Array Precision Monitor, with Vertical and
Horizontal Symmetrically Controlled Beamwidth Array
120-36 SL
Features:
- Controlled directivity on both vertical and
horizontal axis
-High sound pressure levels without the use of
compression horn
-Very low distortion
-Very low power consumption
- Wide frequency response 60Hz to 40kHz
-Fast, easy and simple installation
- Suitable for almost any application, from HiFi
Systems, Home Cinemas, Screening Rooms and
commercial applications
- Ultra-slim aesthetically pleasing cabinet design,
designed to complement the latest LED and
projection screen designs
SL Monitors Overview:
Artcoustic’s Symmetrically Controlled Beamwidth
Array is a ground breaking analogue in-house
loudspeaker technology, which enables superior
controlled directivity on both vertical and horizontal
axis.
With Symmetrically Controlled Beamwidth Array
technology, it is possible to achieve very high sound
pressure levels without the use of compression horn,
very low distortion, very low power consumption
and very flat frequency response, but still maintain
the desired typical horn qualities, such as directivity
and throw.
The SL range is very flexible with compact dimensions
and incredible frequency response and very high
volumes, it has qualities that make it a truly unique
product range.
The ultra slim and lightweight cabinet design makes
this series of speakers easy to install into any existing
Architecture without sacrificing the aesthetics or
the all-important sound quality
Vertical and Horizontal Symmetrically
Controlled Beamwidth Array
Components Overview:
High Frequency driver:
Dual Ring Radiator diaphragm with highly linear suspension
and low loss surrounds for high clarity and clean transient
response. Copper caps for better HF extension and lower
distortion and wave-guide center plug, copper-clad
aluwire
Woofer:
Extra long excursion and Aluminum Short Circuiting Ring,
4-layer voice coil, anodized aluminum for improved heat
dissipation, combined with Distortion Reduced Motor
Crossover:
6 dB/octave low pass and 12 dB/octave high pass filter
Side view, Symmetrically Controlled
Beamwidth Array:
High Sound pressure level at very
Low power consumption, combined
with controlled vertical directivity.
Red lines, example of traditional single
tweeter design

Specification 120-36 SL
Transducer:
LF-MF 12 x 3 inch cone, Symmetric Phase Aligned
HF 6 x 1 inch Dual Ring Radiator, Symmetric Phase
Aligned
Crossover:
Low Pass Filter 6 dB/octave 1000 Hz High Pass
12 dB/octave 4000Hz
Connection:
Single Amped Gold Plated Push Terminals
Performance:
Operating Range 65 Hz (-3dB) to 40 kHz
Nominal Beamwidth Horizontal 90° Vertical 50°
Axial Sensitivity (whole space SPL) LF/MF-HF 104 dB
Input Impedance Nominal Minimum 8 ohms
Recommended High Pass Filter =>80 Hz, 24 dB/octave
Maximum Power Handling 100 Watt
Calculated Axial Output Limit (whole space SPL)
Average Peak LF/MF-HF 121dB @ 40watt
Weight 12 kg
Dimensions H: 1200 (with Baseplate 1232) W: 360 D:
67 mm
Finish:
Silk Paint, Black, White and RAL colours
Grille options: Match System fabrics and Digital print
32
360
350
67
360
28
360
1200
67
60
200
75
60
75
179
120-36 SL
Optional Baseplate
Baseplate spacer
Terminal
Adjustable metal bracket

Two-Way Line Array Precision Monitor, with Vertical and
Horizontal Symmetrically Controlled Beamwidth Array
Speaker with optional frame
and Baseplate
Speaker grille
Optional speaker
frame
Mount frame with
screws
Mount grille with
magnets
414
12
360
1200
26 1254