• Bluetooth wireless technology operates within a range of
about 10 m (30 feet). The maximum communication range
may vary depending on obstacles (a human body, piece of
metal, wall, etc.) and the electromagnetic environment.
• Bluetooth communications may fail under the following
circumstances:
ºA human body is between the unit and the Bluetooth
device. A potential remedy is to orient the Bluetooth device
to face the unit’s antenna.
ºAn obstacle such as a piece of metal or a wall is between
the unit and the Bluetooth device.
• A device transmitting at 2.4 GHz, such as a Wi-Fi router,
cordless telephone or microwave oven, is operating near
the unit.
• Because Bluetooth and Wi-Fi (IEEE 802.11b/g/n) devices
employ the same frequency (2.4 GHz), microwave interference
may occur, causing noise or audio dropout or disabling
communications if the unit operates near a Wi-Fi device.
In such a case, try the following:
ºUse the unit at least 10 m (30 feet) away from the
Wi-Fi device.
ºIf the unit is operating within 10 m (30 feet) of a Wi-Fi
device, turn off the Wi-Fi device.
ºInstall the unit and the Bluetooth device as close to each
other as possible.
• Microwaves emanating from a Bluetooth device may affect
electronic medical technology.
• Turn off the unit and other Bluetooth devices in the following
locations to avoid accidents:
ºWhere inflammable gas is present, such as hospitals and
gas stations
ºNear automatic doors and fire alarms
• The Bluetooth device may not work with mobile phones,
depending on radio-wave conditions and the location where
the device is operating.
• Do not use a Bluetooth device on an airplane. Radio waves may
affect instruments, causing an accident due to malfunction.
• The unit supports security capabilities that comply with the
Bluetooth standard to provide a secure connection when using
the Bluetooth wireless technology, but these capabilities may
be insufficient in some settings. Be careful when communicat-
ing using Bluetooth wireless technology.
• Artec 3D is not responsible for the or inadvertent disclosure
of information during Bluetooth communications.
• Connection to all Bluetooth devices cannot be guaranteed.
ºA device featuring Bluetooth must conform to the
Bluetooth standard as specified by Bluetooth SIG, Inc.,
and be authenticated.
ºEven if the connected device conforms to the above
mentioned Bluetooth standard, some devices may fail to
connect or work incorrectly, depending on their features
and specifications.
• Depending on the device to be connected, communications
may take some time to commence.t
• Generally, most problems can be solved by reconnecting
thepower cable to the turntable.
• When in use, the turntable makes a so buzzing sound;
this is normal.
• In cases where the turntable and Bluetooth fail to connect,
check whether your computer’s Bluetooth capability
is enabled.
• Place the object at the center of the turntable to avoid
causing the device to operate improperly.
• It the turntable does not rotate, check the Bluetooth
connection.
Troubleshooting
Bluetooth Connection
• Avoid using Artec Turntable continuously for an extended
period.
• Only use Artec 3D adapters. Artec 3D is not responsible for any
problems caused by the use of parts or products not approved
by the company.
• Do not use force when plugging in the adapter or power
connector.
• Do not drop, disassemble, open, crush, bend, deform,
puncture, shred, microwave or incinerate the product.
• Do not place on the turntable objects exceeding the maximum
weight (3 kg).
• Do not place objects on the turntable when it is rotating. Stop
the turntable first.
• When using the turntable, place objects at the center to avoid
damaging the device.
• When not using the turntable for long periods, remove all
objects. Unplug the cable from the turntable when storing.
• Placing a heavy object on the turntable for long periods can
damage the device.
• Do not put heavy weight or pressure on the unit during storage,
as it may cause the unit to deform.
• Do not turn the rotary plate manually.
• Do not touch the turntable while it is rotating.
• Do not subject the unit to excessive shocks.
• Do not expose the unit to extremely high or low temperatures.
• Do not leave the unit in direct sunlight for an extended periods.
• Do not leave the unit in a car for long periods. Doing so may
cause a malfunction.
• Clean the unit only with a so, dry cloth. Do not use
abrasive cleaners.
• Do not expose the unit to water; it is not waterproof.
• Do not expose the unit to humidity, dust, soot or steam.
• This product is not edible.
• Do not put the turntable in a microwave oven, dishwasher,
washing machine or dryer.
• Keep out of reach of children.
• Do not attempt to handle the plug or power connector
with wet hands.
• Do not expose the turntable to water, alcohol, benzene
or any other chemical.
• Do not expose the turntable to fire or flammable substances.
• Do not store the turntable close to high-heat sources.
• Do not use the unit in humid locations or in bad weather,
such as rain or snow.
• If you experience any physical discomfort aer using the unit,
stop using it immediately.
Safety Information
www.artec3d.com
© 2019
Artec Europe Sarl
2, Rue Jean Engling
L-1466 Luxembourg 19AP0 01
Find more information:
docs.artec-group.com(manuals)
artecgroup.zendesk.com
(FAQs, videos and articles)
