KR8-315 Series
Quick Start Guide
P/N:6806800N31C (September 2014)
What’s in the box?
When installing or servicing the
enclosure or accessories, strictly
observe the safety precautions
in the Safety Notes Summary.
Otherwise, personal injury or
property damage may occur.
Make sure you receive all items of
your shipment:
• One KR8-315 Series enclosure
• One power adapter
• One mounting adapter
• One cable mounting tie
• Screws
• One printed copy of Quick Start
Guide (this document)
• One printed copy of Safety Notes
Summary
• Any other optional item that you
ordered
Prepare the installation
site
• The KR8-315 series has three variants
KR8-315, KR8-315-ET and KR8-315E.
For information on the environmen-
tal and power requirements of the
three variants, see the KR8-315 Series
Installation and Use manual.
• The KR8-315 Series must be in
good condition, without defects
such as oxidation, chemical corro-
sion, missing components, or trans-
portation damage.
• Confirm the position where the KR8-
315 Series will be installed.
1
2
VESA mounting
1. Fasten the 4pcs M3 shoulder screws
to enclosure.
2. Install the mounting adapter to back
of monitor, using the 4pcs
M4x10mm screws.
3. Mount the enclosure to the adapter
fastened on the monitor.
The above shown mounting direction is
recommended for best efficiency of heat
dissipation.
3
