Artistic Licence moody cvx1 User manual

Artistic Licence
moody cvx1 Quick Start Guide Version 2-0
moody cvx1
Quick Start Guide
The full User Guide can be downloaded via the QR code

Operation (moody cvx1)
From factory, all scene channels are programmed to cyan. At power on, moody will automatically
fade the master level to full over 5 seconds.
If lights are on, briey press the control: moody fades the master level to zero over 5 seconds.
If lights are o󰀨, briey press the control: moody fades the master level to the previously used
setting over 5 seconds.
Rotate control clockwise to increase master level. Rotate control counter-clockwise to reduce
master level. The LED indictor shows the master level and colour of the xture.
To set a scene: please see programming instructions below.
Programming (moody cvx1)
To enter programming mode, press and hold control for 3 seconds.
Step 1
moody’s indicator LED ashes red to acknowledge it has entered
colour programming mode, then shows the colour of the xture.
Step 2 - programme the colour (hue)
a) Wait 5 seconds; moody will start slowly cycling through the colour
palette. When you see the colour you want, briey press the
control.
b) Alternatively, rotate the control clockwise or counter-clockwise to
move forwards or backwards through the colour palette. When
you see the colour you want, briey press the control.
Overview
ymoody cvx1
- Controls a single RGB xture with CV dimmer output at 12 - 24V
- Output is RGB common anode
- Wheel controls intensity
N.B. During the programming process, the xture will change
colour to show the e󰀨ect of your programming.

moody’s indicator LED ashes white to acknowledge it has entered
white level programming mode, then displays the white level of the
xture.
Step 3 - programme the white level
N.B. In moody cvx1, the white level is really saturation - it controls
the amount of white that is mixed in with the colour and allows
shades to be created.
b) Alternatively, rotate the control clockwise or counter-clockwise
to increase or decrease the white level. When you see the white
level you want, briey press the control.
a) Wait 5 seconds; moody will start slowly cycling through the white
levels. When you see the white level you want, briey press the
control.
moody displays the master level and colour of the xture. It is now
in normal operating mode.
Step 5 (end)
Programming of the xture is now complete. Press and hold
the control for 3 seconds to exit programming mode. moody
acknowledges by ashing green.
Step 4 - exit programming mode

Due to our policy of continuing product improvement
specications are subject to change without notice
Artistic Licence
The Mould Making Workshop
Soby Mews
Bovey Tracey
TQ13 9JG
United Kingdom
Telephone [phone]
Email: [e-mail]
Web: www.ArtisticLicence.com
[e-mail]