ARRI Case for Orbiter User manual

Case for Orbiter
Arnold & Richter Cine Technik GmbH & Co. Betriebs KG, Arriweg 17, D-83071 Stephanskirchen, Germany | www.arri.com
Instruction
01 / 2021
L5.0039241

Safety instructions
• Please read these instructions carefully before using
 theproductforthersttime.Thefollowingtextcontains
important information for safe handling.
• For your personal safety, please observe the notes and
safety instructions.
• Observe all common and local safety regulations.
• Please keep these instructions for possible subsequent
owners.
• The handles are not intended for lifting to great heights
 (e.g.crane).Thehandlesmaybreako󰀨.
• Always mount the protective cap and disconnect all
cables for transport.
Maintenance
Inspect the product regularly for visible damage.
• Do not use a deformed product.
• Do not use a product with a defective component.
Repair the defective component immediately.
Intended use
This product is an accessory for the „Orbiter“ luminaire and
its accessories. The Orbiter is intended to illuminate per-
sons and objects. The case is intended to carry and store
one ARRI Orbiter including accessories as described.
Always follow the safety information.
Any usage other than described above is not permitted
and can damage the product and lead to associated risks
suchasshort-circuit,re,electricshock,etc.
Thisproductfulllsalllegalrequirements.
ARRI is not liable for damages caused by improper use or
incorrect operation.
Specication
ARRI Ident. No. L2.0034626
Dimensions(LxWxH) 816x540x426mm/32.1x21.3x16.8“
Weight 15kg/33.1lbs.net(withoutOrbiter&accessories)
max.34kg/75lbs.gross(incl.Orbiter&accessories)
Position of contents
Rain Cover
*with feet or skid mounted
Control Panel
Antenna
Cables
MAN YokeBarndoors
Place Holder for
Protective Cap
Orbiter*

Orbiter with raincover mounted:
Remove inlay no. 3
Orbiter without raincover:
Keep inlay no. 3
To pack barndoors and cables
ARRI, the ARRI Logo, ARRIMAX, ARRISUN, EB, , L-Series, MAX Technology, M-Series, Orbiter, POCKETPAR, Quick Lighting Mount, True Blue, SkyPanel,
SKYPANEL, T 12 and T 24 are registered Trademarks of Arnold & Richter Cine Technik GmbH & Co. Betriebs KG
Designandspecicationaresubjecttochangewithoutnotice.
Barndoor 168 mm
Cables
Barndoor 245 mm

Orbiter with skid mounted:
Remove inlay no. 2
Orbiter with feet mounted:
Keep inlay no. 2
Compartment and inlays
The compartments of the case are designed with three
removableinlaystostorethedi󰀨erentcongurationsof
the Orbiter. Always remove Orbiter and accessories
before pulling out the foam inlays. Otherwise the foam
inlays can tear.
Thefollowingfoaminlaysareexibleandcanberemoved:
1. Inlay for cables and barndoors
It must always remain in the case as it protects the
cables and barndoors while transporting.
2. Inlay for Orbiter without skid
It holds the Orbiter in place when the skid is not
mounted.
3. Inlay for Orbiter without rain cover
It holds the Orbiter in place when the rain cover is
not mounted.
1
To pack Orbiter with and without skid
To pack Orbiter with and without rain cover


23
ARRI Service
In case of technical problems please visit us at
www.arri.com
Arnold & Richter Cine Technik GmbH & Co. Betriebs KG
Global Application & Services
Arriweg 17
D-83071 Stephanskirchen
Germany