Artkalia AKLA1072 User manual

Artkalia USA
1811 NE 146th St
North Miami, FL 33181
Tel: [phone]
[email protected]
www.artkalia.com Instruction Manual
V2.0 US 10/16
PACKAGE CONTENT
• 1 Light shape
• 1 Waterproof, rechargeable and removable patented LED Module. Designed for indoor,
outdoor and pool use.
• 1 External AC adapter
• 1 User manual
• 1 Remote control (option)
PLEASE READ CAREFULLY THE INSTRUCTIONS
BEFORE USE
Patented concept. registered shape and model. All rights reserved.
A = Turn ON
B = Turn OFF
C = Color Memory display.
When scrolling colors, press C button for 2 seconds to
memorize the chosen colour. The color wil remain memorized
until you replace it with another one.
D = Fade + Flickering candle e󰀨ect (slow)
E = Candle e󰀨ect (quick)
The candle e󰀨ects D and E work on steady (xed) colors only.
F1 = Decrease light intensity
F2 = Increase light intensity up to 125% (Boost e󰀨ect)
G = Scrolling colors - Progressive changing mixed colors
H = Press H button for 3 seconds to lock the 3 buttons under the
LED module. Press again 3 seconds to allow access again.
Option 2: by RF Remote Control (option)
WARNING
For safe use and installation, and in order to reduce the risk of re, electrical shock or injury
to persons or property, please follow the below guidelines:
While unpacking, please carefully check whether lamps/parts/wiring have been damaged
during transport and do not operate/install any product which appears damaged in any way.
In which case return the complete product to the place of purchase for repair or replacement.
TECHNICAL SPECIFICATIONS
• LED Module with RGB and WARM WHITE LED colors
• Built in recheargeable Lion Polymer battery 2200 mHa
• Radio Frequency Remote Control. (2 x AAA alkaline batteries included)
• Standards and certications: CE, UL, RoHS, C’Tick, FCC, CSA, PSE, IC, MIC Compliant
6 - RECYCLING
• This product bears the selective sorting symbol for waste electrical and electronic
equipment (WEEE).
• For further recycling information in your area, please contact your local or regional
authorities.
• Electronic products who are not correctly recycled through the selective sorting
mandatory process are potentially dangerous for the environment and human health.
Artkalia values the protection of the environment. Like us, think green and recycle!
To turn ON/OFF the remote control access, press 3 seconds the button K2 under the LED
Module.

US - Instruction Manual
Instruction Manual
V2.0 US 10/16
2 - FIRST USE & CHARGING INSTRUCTIONS
Fully charge the battery before rst use (6 to 10 hours charging time)
DO NOT CHARGE AND USE YOUR PRODUCT AT THE SAME TIME.
C = Removable LED module
D = Individual induction
charging base
• Step 1: Connect the external AC adapter to an electrical outlet and then connect the other
end under the charging base (D). The power indicator (blue diode) lights up.
• Step 2: Make sure that both the LED module (C) and the charging base (D) are perfectly
clean and dry.
• Step 3: Put your LED module (C) gently over the induction charging base. The power
indicator will turn red.
Red indicator : battery is charging
Blue indicator: battery is fully charged
5 - COLOR OPTIONS MANAGEMENT
Use the 3 buttons located under the LED module or the remote control (option) to access all
features and settings.
3 - LED MODULE DISASSEMBLY
Option 1: by bottom buttons
K1 = Automatic color change + color memory
K2 = Steady colors + Candle e󰀨ect + Remote control access
K3 = Light intensity adjustment - Booster/Dimmer
• K1 button: 1st tap: progressive color scrolling
2nd tap: dispays your favourite coulor previously memorized
3rd tap: turns the lamp o󰀨
To memorize your favourite color: when scrolling colors, press K1 button for 2
seconds. The color wil remain memorized until you replace it with another one.
• K2 button: 1st to 10th tap: steady-xed colors (warm white, pure white, yellow, orange,
green, red, pink, purple, blue, dark blue)
11th tap: turns the lamp o󰀨
K2 button allows to activate or disable the remote control access. Press 3
seconds to turn it ON or OFF.
• K3 button: 1st to 3rd tap: the light intensity decreases
4th tap: the light goes back to the maximum intensity
A = Direct lighting control with 3
buttons under the module
B = Lighting shape (model
depends on your product)
1 - SAFETY INSTRUCTIONS
• Never expose the lamp to re source ( replace, candle ... ) or any other heat source to
prevent risk of burn and serious injury.
• This product is not a toy and need to be used under adult supervision.
• Always unplug the AC charger from the power socket if any thunderstorm in your area.
• Be careful when you handle the product: although solid, poor handling could damage it,
causing scratches on the di󰀨user or indelible marks.
• To remove it for charging, slowly twist the LED
module clockwise using the metal hook underneath
the LED module.
• To replace it, twist the LED module counterclockwise
using the metal hook underneath the LED module.
4 - SAFETY INSTRUCTIONS WHILE CHARGING
• Rinse the lamp and the LED module with clean water after each use in the swimming
pool, then dry properly with a soft, dry cloth before charging.
• For your safety, the charging system is built to automatically cut the charge o󰀨 when the
battery is fully charged.
• The charger needs to be operate inside only and away from humidity or any other liquids.
WARNING
This charger is specially designed to function with the Artkalia LED lamp provided in this
package and cannot be used for any other product.
- Do not touch the charger during charge.
- Do not connect the base of the lamp to another device.
- Do not attempt to charge the lamp with a charger other than that provided in the pack.
Please contact your dealer for any questions.