ARTRAY ARTCAM-130HP-WOM Series User manual

Feb. 18. 2014
Ver1.00
USB2.0 NIR CMOS CAMERA
ARTCAM-130HP-WOM series
INSTRUCTION BOOKLET
1.3M Pixels ARTCAM-130HP-WOM
ARTRAYCO., LTD.

- 2 -
Contents
1. Attention·······································3
2. Introduction···································6
3. MainFeatures·······························6
4. TheProduct··································8
5. ConnecttheCamera······················8
6. Specifications································9
7. ExternalDimensions·······················11
8. Spectralsensitivitycharacteristics······12
9. Characteristicofvisiblelightcutfilter 12
10. Optionalfunction····························13
11. RecommendedPC························14

- 3 -
1.Attention
■Aboutthismanual
1．Beforeusingthecamera, pleasereadthismanualthoroughly.
2．Pleasekeep thismanualreachableandalwaysrefertothecontentswhen needed.
3．Please contact usif themanualislostordamaged.Wewillprovideareplacement.
4．We cannotguarantee thesafetyof improper usesofthecamera.
5．Foryoursafety,pleasefollowthedirectionsofthismanual.
6．Allcontentsaresubjecttochange.
7．Images inthismanualmay have been simplified tobeeasier comprehended.
8．Please contact usifyoufindanyunclearpoints ormistakes in thismanual.
9. Quoting, copyingoraltering someor allpartsofthemanualwithout ourpermission isprohibited.
10．Wearenotresponsibleforanylostordamagesonyourprofitsduetotheuse of ourproducts.
11．Pleaseunderstandthatouroverseabranchesdonotprovidemaintenanceorrepairservices.
■About theIcons
Tokeepthe safetyof theuser,otherpeopleandtheirproperties,pleasepayattentiontothefollowingicons.
Warning
Iftheuserfailstofollowtheinstruction,physicalinjuryonhumanordamagesonhardwaremayoccur.
Caution
Iftheuserfailsto followtheinstruction,seriousinjuryordeathmayoccur.

- 4 -
■For Safe Use
Warning
●In following circumstances, please stop using the product and turn off the power immediately to prevent the risks of
firesandelectric shocks.If the productisdefective, pleasecontact us for repairorexchange.For your safety,please do
notdisassemble,modifyorrepairthecameraonyourown.
Pleasestopusingtheproductandturnoffthepowerimmediatelywhen:
・Theproductbecomessmokyorgetsextremelyhotonthesurface,ormakesunusual smells orsounds.
・Foreignmaterial orwater getsinto theproduct.
・Theproductfallsandbecomesdamaged.
●Do not place theproductonunstablesurfaces.Theproductmaybefallenandpeoplemayget hurt.
Caution
●Do not expose the product to steam orfumestoavoidelectricshocksandfires.
●Do not leavetheproductinhightemperatureplacessuch asinsideof vehiclesorunderdirect sunlight.
High temperaturemaycausedamagestothecamera,oreven causefires.
●Do not cover the product with cloth or other materials. The product may get extremely hot and the heat may cause
deformationsonthepartsorevencausefires.
●Pleaseavoiddroppingorshockingtheproductastheproductmaybe damaged.
●Do not touchthecablewitha wethand.Suchactionmaycause electric shocks.
●Please avoid continuously contacting the surface of the camera to your skin when the camera is being used. The
surfacetemperatureofthecameramaycauseburns.
■Other Notices
●Please do not use the camera under strong lights such as sun light for a long period. Also please do notexpose the
camera understrong lights even whentheproductisnotbeing used because thesensormightbe damaged.
Maintenance
●Wipethedirtonsurfacewithsoft clothor tissuepaper.Donotusealcohol,thinneror benzenetoavoiddamaging the
surfacepaints.
ElectroMagneticInterference
●The camera may interference with electronic devices such as TV and radio. Please do not place the camera next to
suchequipment.

- 5 -
■Export Control
The Government of Japan controls military sensitive goods and technologies including relevant dual-use goods and
technologies.
This product is a Catch-all Control item subject to the Foreign Exchange and Foreign Trade Act and its relevant
legislations.Exceptforexportingtothe27whitecountriesdesignatedintheCabinetOrder,exportlicensesarerequired
if the products are going to be used for military use or if the end user of the product is related to all kinds of military
activities.Ifyourcircumstancescausetheneedtoapplyexportlicenses,please notifyusbeforeyouplaceorders.Also,
please notifyusinadvance ifthe end users or purposes of usechangeafter thepurchase and thus causethe needto
applyexportlicenses.
*The27whitecountriesnotundertheUNSCArmsEmbargo:
Argentina, Australia, Austria, Belgium, Bulgaria, Canada, Czech Republic, Denmark, Finland, France, Germany,
Greece, Hungary, Ireland, Italy, Republic of Korea, Luxemburg, Netherlands, New Zealand,Norway, Poland,Portugal,
Spain,Sweden,Switzerland,UnitedKingdom,andUnitedStates
About the Japanese Security Export Controls, please refer to the webpage for Security Export Control Policy, The
MinistryofEconomy,TradeandIndustry:
http://www.meti.go.jp/policy/anpo/englishpage.html
■Guarantee
To save the environment, we do not issue warranty in printed format. Instead, all records of the warranty periods,
deliverydatesandthecustomerinformationarewellkeptinoursystem.
Formoredetails,pleaserefertothesitesbelow:
HardwareWarranty:http: //www.artray.us/download/artray_warranty.pdf

- 6 -
2. Introduction
ARTCAM-130HP-WOMSeriesisCMOScamerasforindustrialuse.
Sensoradoptshighsensitivityinthe near-infraredmadebyHAMAMATSUPhotonics.
ARTCAM-130HP-WOM series adopts USB2.0 interface, so image data can be delivered to PC directly without a
captureboard.Also,thiscameraisequippedwithan onboardmemorywhichavoiddatamissingduringtransfer.
3. Main Features
・Highnear-infraredsensitivity
Inaddition tovisiblelight, even at highsensitivityin thenear-infrared, itis bestto getuseofnear-infraredimage.
Toperfectlyacquirenear-infraredimage, visible cutfilterbuilt-inmodel (ARTCAM-130HP-NIR-WOM)isalsoavailable.
・Highresolution。
ARTCAM-130HP-WOMusesahigherresolutionsensorof1.3Mpixelanddeliversimageat8 frame/second
・USB2.0Interface
ThiscameraadoptsUSB2.0interface,so thedatacanbedeliveredtoPCdirectly.Nocaptureboardisneeded.
・Compactandlightweight
Easyinstallationtovariouskindsofequipment.
・ROI(RegionOfInterest)
One major benefit of CMOS sensor is the ROI function which enables readout of designated partial images with a
fastertransmissionspeed.
・Globalshutter
EquippedCMOSsensorandadoptedaglobalshuttersuitableformachinevision.
・IncludedViewerSoftware
ART-Viewer(WindowsXP/Vista/7/8).
Userscaneasilypreview,saveimagesandchangecamerasettingsbyART-Viewer.
Total
vertical
pixels
Totalhorizontal pixels
(0,0)
(Horizontal
origination,
Vertical
origination)
Horizontal pixels
Vertical
pixels
Validarea

- 7 -
・2DMeasurement&FilingSoftware(Optional)
Useful 2Dmeasuringfunctionsareavailable withtheoptional 2DMeasuring&FilingSoftware-ART-MEASURE.
・RecordingSoftware(Optional)
Theoptionalrecordingsoftware-ART-RECallowstheusertosavemoviesinAVIformat.
・SoftwareDevelopmentKit
Forcustomerwhopreferstocreatetheirownimageprocessingsoftwareoruseourcamerawithotherapplications,we
provide SDKupon requests.

- 8 -
4. TheProduct
1)Camera
2)USB2.0 Cable AtoBconnector 3m
3) IntroductionBooklet
4)Viewersoftware/DeviceDriverCD
5)SoftwareDevelopmentKit[ARTCCM-SDK]
<Options>
1)C Mountlens
2) 2Measurement &FilingSoftware [ART-MEASURE]
3) RecordingSoftware [ART-REC]
4)5mextensioncablewithUSB2.0repeater
5. Connect the Camera
5-1 Howtoconnectacamera
5-2 ShutterSpeed
ShutterspeedcanbechangedonthestandardviewersoftwareART-Viewer.
The shutter speed is set directly on the sensor register, so please refer to the following formulas for the real exposure
time.
Model
Method
ARTCAM-130HP-WOM
Range:1~8152（ExposureTime:1/8651~1.06sec）
ExposureTime＝ShutterValue×115.2[μsec]
※Whendriveat1280×1024pixels, 25MHz

- 9 -
6. Specifications
6-1 MonochromeModel
Model
ARTCAM-130HP-WOM
Sensor Type
CMOS Monochrome Image Sensor, HAMAMATSU Photonics Model: S11661
Active Pixels
1280 (H)×1024(V)
Resolution
1280 (H)×1024(V)
Active Imager
Size
9.472(H)×7.578(V)mm 2/3 inch
Scan Mode
Progressive Scan
Pixel Size
7.4(H)×7.4(V)μm
Shutter Type
Global Shutter
Frame Rate
8fps
Shutter Speed
1/8651～1.06s
Interface
USB2.0 Bulk Transfer
Synchronization
System
Internal Synchronization
Lens Mount
C Mount
Power
DC5V(Supplied by USB port)
Power Consumption
Under Approx.2W
Ambient Conditions
Operating Temperature/Humidity : 0～35°C/10～80%(Non condensing)
Storage Temperature/Humidity : 0～60°C /10～95%(Non condensing)
External Dimensions
50(W)×47(H)×41.7(D)mm ※Lens, tripod plate are not included
Weight
Approx.110g ※Tripod plate, cable are not included

- 10 -
6-2 NIRModel
Model
ARTCAM-130HP-NIR-WOM
Sensor Type
CMOS Monochrome Image Sensor, HAMAMATSU Photonics Model: S11661
Active Pixels
1280 (H)×1024(V)
Resolution
1280 (H)×1024(V)
Active Imager
Size
9.472(H)×7.578(V)mm 2/3 inch
Scan Mode
Progressive Scan
Pixel Size
7.4(H)×7.4(V)μm
Shutter Type
Global Shutter
Frame Rate
8fps
Shutter Speed
1/8651～1.06s
Interface
USB2.0 Bulk Transfer
Synchronization System
Internal Synchronization
Lens Mount
C Mount
Power
DC5V(Supplied by USB port)
Power Consumption
Under Approx.2W
Ambient Conditions
Operating Temperature/Humidity : 0～35°C/10～80%(Non condensing)
Storage Temperature/Humidity : 0～60°C /10～95%(Non condensing)
External Dimensions
50(W)×47(H)×41.7(D)mm ※Lens, tripod plate are not included
Weight
Approx.110g ※Tripod plate, cable are not included

- 11 -
7. External Dimensions
7-1 C-MOUNT,CASEDCAMERA
ARTCAM-130HP-WOM/130HP-NIR-WOM

- 12 -
8. Spectralsensitivitycharacteristics
9. Characteristic ofvisible light cutfilter
ARTCAM-130HP-NIR-WOMisadopting R70onvisiblecutfilter.
Pleasecheck thespectralsensitivitycharacteristicof imagesensoraswell.

- 13 -
11. Optional Functions
11-1 Externaltriggerfunction
ARTCAM-130HP-WOMseriesaredesigned withexternaltrigger.
※Pleasecontactusif youneed thisfunction.
Trigger input circuitdiagram
R1 = 2.4kΩ
R2 = 10kΩ
R2
TRIG
3.3V
FPGA
CAMERA
R1
BNC
PC814
SENSOR

- 14 -
12. Recommended PC
12-1 Recommended System Requirements
●Intel chip set, ICH series (≧ICH6)
●CPU: Intel Core2duo 2.4GHz or higher
●Memory: ≧512MB
●OS: ≧Windows XP
12-2 Minimum System Requirements
●USB 2.0 Enhanced Host Controller
●CPU: Intel Pentium4 1.7GHz or higher
●Memory: ≧256MB
●OS: ≧Windows XP
Caution
■Please refer the restrictions below when you useARTCAM.
(1)Recommended System requirements
If the system specifications are below the recommended requirements, it is possible that the camera may not reach the
maximum speed.
(2) Use of other USB3.0 hardware
The data on our camera/converter is transferred in bulk mode. For this reason, when using our camera/converter,
please avoid using other bulk transferred USB3.0 hardware such as Memory stick, External HDD, External DVD,
CDROM and etc.
As a solution, we recommend to install a PCI USB host card to the PC and connect external USB hardware to this port
only.
(3) USB3.0 cable Extension
We cannot guarantee the functionality of the USB3 camera if the user adopts USB3.0 extension cables or repeaters
which are not confirmed by us. With the extension cables or repeaters, the bandwidth of transfer may differ, and thus
caused malfunctions such as a low frame rate or recognition failure on the camera.
What may cause the problem is that the regulation of the power lines becomes not enough, and so causes impudence
mismatch on data signals.
*For the recommended extension cable, please contact our sales department. (TEL : [phone])
ARTRAY CO., LTD.
1-17-5 Kouenjikita, Suginami-ku, Tokyo 166-0002 Japan
Tel : [phone] Fax : [phone]
Email : [e-mail] URL : www.artray. us