ARTRAY ARTCAM-130MI-NIR User manual

-1-
USB2.0 Near-infrared ray CMOS CAMERA
ARTCAM-130MI-NIR
INSTRUCTION BOOKLET
ARTRAY CO.,LTD.
1.3M pixels progressive
February,9,2006

-2-
Contents
1. Description 3
2. Main Features 3
3. List of items 3
4. Position of each part 4
5. Functions and Operation 6
6. Dimension 6
7. Specifications 7

-3-
1. Description
2. Main Features
3. List of Items
ARTCAM-130MI-NIR is a 1/2" CMOS near-infrared ray camera developed for industrial use.
Image can be saved directly to your PC with high-speed transfer via USB2.0 interface.
* High sensitivity and high resolution
Max.resolution of 1280Z1024 pixels. Image size can be altered.
* Flange-back adjustment˴˴
˴˴
With Artray's original mechanism, flange-back is adjustable
while real-time image is displayed.
* Electric shutter
˴˴
Shutter speed can be adjusted on software screen.
˴Please commute exposure time with the following formula;
(Shutter value x 1514 - 180) x 0.000041(msec)
* Frame rate
˴˴
Frame rates are different for 8 bits model and 10 bits model.
<8 bits model> <10 bits model>
SXGA:15FPS SXGA: 8FPS
SVGA:32FPS SVGA:16FPS
* Gain
"Gain" can be controlled from the PC.
* Offset
"Offset" can be controlled from the PC.
1)˴Camera 1(equiopped with tripod breaket, but not lens)
2)˴User Instruction 1
3)˴Software CD 1
ޝOptionޞ
1)Filing & 2D measuring system
2)SDK(ARTCCM-SDK)
3)5.0m camera cable

-4-
4. Position of Each Part
4-1 Side panel
4-2 Back panel
Do NOT remove the cover. This may break camera or cause static electricity.
Caution
(1) USB
:USB2.0 interface cable
(2) TRG (BNC)
:External contact trigger
Flange-back adjustment
screw
(1) (2)

-5-
4-3 EXTERNAL TRIGGER
Standard Frame Timing
T = Reset Time
TRIGGER
VD
HD
PCLK
row 16 row 17 row 18 row 19
row n-1 row n row ǫ
T2
Remark1 : T is the time required for reset. Time required for each model is as below.
Start reset from trailing edge of trigger terminal.
ARTCAM-130MI ---> 70msec approx.
ARTCAM-200MI ---> 100msec approx.
ARTCAM-300MI ---> 170msec approx.
1. Timing
2. External trigger hardware
VCC 2.4KǡExternal BNC connector
Input㧦12㨪24VDC
Current in either direction
PC841˴photo coupler
10Kǡ
GND
External trigger
(These values are for dafault resolution)
Remark2 : The actual time for capturing is at least twice as long as the time
indicated in Remark1 (@ 8 bits).
T2 is the transfer time. IsCaptureFinish() is returned when T2 is completed.
Remark3 : Serial NO0963 has been altered to photo-isolation type as below.
The following is the internal equivalent circuit.

-6-
5. Functions and operation
6.Dimension
5-1 Selection of lens
5-2 Camera connection
The mount of lens is C-mount.
C-mount fixing screw is installed in the camera.
PC monitor
PC
USB2.0 Cable
USB2.0
host adaptor
ARTCAM-130MI-NIR
Image output/power connection
0.5 (Adjustment ) 59.3
Focus ring
1/4-20UNC
SECTION˴A-A
2 spots˴S:4/1
50
R5
47
9
30
M6
M6
32
22
43.3
26.35
15.35
20
8.5
2-Ǿ10
Ǿ3.2
0.5
1
Ǿ2.2

-7-
7. Specifications of camera
Electric characteristics
ARTCAM-130MI-NIR
1. Image pick up device
2. Color mothod
3. Max. resoluion
4. Lens size
5. Soan mode
6. Pixel size
7. S/N ratio
8. Sensitivity
9. Electric shutter mode
10. White balance
11. Synchro system
12. Flange back
13. Lens mount
14. Offset
15. Gain
16. Power supply
17. Power condensing
18. Ambient temperature
and humidity
19. Dimension and weight
SPECParameter Comment Remark
NO
1˴˴Power
2˴˴Shutter control
3˴˴Gain control
4˴˴S/N ratio
5˴˴ǫcharacteristics
6˴˴Power consumption
7˴˴Image interface
1/2"CMOS
Single-panel CMOS color method
1.3M pixel
1/2"format
Progressive
5.2Ǵm x 5.2Ǵm(6.65 x 5.32mm pixel areas)
54dB
1.8V/Lux-sec(550nm)
Manual 1/30-1/1800˴˴
Manual/auto, switchable
Internal syschro
Manual adjustment
C mount(Lens is NOT included)
Manual adjustment
Manual adjustment
DC5V㧔SELV㧕
2.0W approx
0-35(recommended), 80%(non-condensing)
50(W)56(H)59.3(D)mm,222g approx
+5V 0.4A
Manual adjustment
Manual adjustment
54dB
1.0 fixed
<2.0W
USB2, digital output
supplied by USB port
software control
software control

-8-
Image pick up device
SPECParameter Comment Remark
1˴˴Imager
2˴˴Optical size
3˴˴Total resolution
4˴˴Max resolution
5˴˴Pixel size
6˴˴Sensitivity
MI1300
Equivalent to 1/2"
1312 x 1048
1280 x 1024
5.2 x 5.2um
1.8V/Lux-sec(550nm)
Physical specifications
SPEC
Parameter Comment Remark
1˴Lens
2 ˴Max weight
3˴Dimension
4˴Material of enclosure
C mount
222g
(with cable)
50 x 56 x 59.3mm
Aluminium
Operating environment
SPECParameter Comment Remark
NO
-10-50
㧔10-95%RHޔnon-
condesing㧕
-35-80
㧔10-95%RHޔnon-
condesing㧕
70K hours(at 60㧕
EN61000-6-4
EN61000-6-2
Acceleration:29.4M/S
Frequency:5-200Hz
Sweep cycle:10min
Test time:
Ups and down˴2h
Left and right˴2h
Back and fouth˴2h
Tesk OK
1˴Operating temperature
2˴Storage temperature
3˴MTBF
4˴EMI
5˴EMS
6˴Vibration
NO
NO

-9-
ARTRAY CO.,LTD.
5F Ueno bldg, 1-17-5 Kouenjikita Suginami-ku,
Tokyo 166-0002 Japan
Tel:[phone] Fax:[phone]
Email: [e-mail]
URL: http://www.artray.co.jp
<<System requirements>>
PCs which use south-bridge of ICH4,ICH5 and ICH6 are recommended
*CPU: Pentium4 1.7GHz or higher
Embedded USB2.0 port (PCI/PCMCIA USB2.0 ports are not compliant)
*Memory 512MB or higher
*OS Windows 2000(SP4)/XP(SP1)
Technical standard
SPECParameter Comment Remark
NO
1˴˴UL approved Materials used in
wiring are compliant
with UL.
Storage temperature
(10-95%RH, non-condensing)
2˴˴CE
Characteristics of wavelength
Characteristics of NIR transmission filter Applied filter is R70˴˴˴.

ARTRAY CO., LTD. 2007/08/27
Refer to the restrictions below when using ARTCAM/ARTCNV
1. USB host chip
Use the USB host chip which is Intel authorized USB2 host controller.
Make sure if you find "Intel®82801DB/DBM USB2 ENHANCED HOST CONTROLLER" on USB
Controller window according to the following procedure.
"Control Panel" -> "Hardware" -> "Device Manager" -> "USB Controller"
NOTICE: We cannot guarantee the proper operation of this camera/converter when you use the
external USB host card due to its design and its transfer rate. The transfer speed is slow because
it is connected to host via PCI bus. In case of using ARTCNV, color transfer is not available.
( Only Monochrome.)
2. Hyper Thread Bios
Disable this function in case of PC with a built-in Intel hyper thread.
3. With the other USB2.0 hardware
You may be unable to use the other USB2.0 hardware such as Memory stick, External HDD,
External DVD, CDROM and etc. when you use this camera/converter due to bulk transfer mode
of this camera/converter.
It is because bulk transfer device is not recognized, especially in case of Cypress control chip,
due to handshaking of USB port and PC bios.
It is hard to solve this matter for the reason that it is related to the lower firmware of control
chip and PC bios.
As a recommended measure, add PCI USB host card on PC and use its USB ports for the
external USB hardware.
4. Extension of USB2.0 cable
We cannot guarantee the proper operation of the extension cable even though it is compatible
with USB2.0 except the extension cables below we have confirmed its proper operation because
USB transfer frequency of this camera is 192MHz.
For the recommended extension cable, we refer you to our sales dep’t. (TEL: [phone])
In case of the trouble using the extension cable, you may have "Camera error", "Disappearance
of Device driver", " Operation error in high-speed mode", "Unknown USB device" and etc.