AS ONE Drymax DMX-400 User manual
AS ONE CORPORATION.
Do not put explosive or flammable substances in the product. May cause explosion or fire. Do not use highly
volatile chemicals such as ether, benzene, alcohol or LP gas.
Do not use in wet environments. There is a risk of electric shock.
Center pillar
)
(Can be removed when storing long samples.
Operation panel
Temperature humidity sensor
Dehumidifying unit
Power unit
Temperature Display Light
Play Light
Alarm Lamp Humidity-Temperature Display ON/OFF key
How to
•Operation method
Please insert the power supply plug into the outlet.
Press the ON/OFF key on the operation panel to turn on the power supply.
( The display will be shown "888" "U 2.0" and the current internal humidity will be appeared on the display.)
*Play light will display “1” “2 “ then the operation will start automatically.
The play light turns on during unit work and turn off after work.)
④Normally, humidity is displayed on the humidity/temperature display.
Press the humidity/temperature switch key when checking the inside temperature.
inside temperature is displayed and the display switches to the internal humidity
d
isplay after 5 seconds.
(When inside temperature is displayed, the inside temperature indicator lights.)
•Humidity
To stop the operation, press the On/OFF key.
Unplug the power cord if you will not be using it for a long time.
While the machine is in operation, press the SET key and the DOWN (▼) key at the
same time. Then it will switch to alarm setting mode.
The humidity/temperature display lights up, so use the UP/DOWN keys to input the
humidity.
When the SET key is pressed, the alarm humidity is input.
The dot in the humidity/temperature display flashes. The blinking dot means the alarm
time input mode.
Enter the alarm time (unit: minutes) with the UP/DOWN keys and press the SET key.
(The internal humidity is displayed on the humidity/temperature display.Return to the
operating status.)
In the figure on the right, the alarm lamp lights up when the internal humidity is 50% and
20 minutes have elapsed.
Department in charge : AS ONE Corporation Overseas Sales Department
Address : 2-1-27,Edobori,Nishi-ku Osaka550-8527 Japan
TEL:81-6-6447-8905
FAX:81-6-6447-8681
E-mail: [email protected]
This manual suits for next models
5
Table of contents
