Ashdown AAA-EVO User manual

Thank you for purchasing your Ashdown Engineering Amplier and welcome to
the family! We really think you’ve made the right choice and know that this
amplier will give you years of great tone and service.
It is a machine though and needs to be looked after, please read
through this user manual which will help you get the most out of
your new Amp and keep it running as long as some of our
happiest and very famous customers.
Please register this product online so we can make sure we give you years of
customer support through our friendly in-house service centre.
Here is where you need to visit to register your product:
http://www.ashdownmusic.com/pages/register-your-product
THANK YOU
REGISTER ONLINE
MID
MID
AAA EVO FRONT PANELS:

AAA-EVO USER GUIDE
Input
A single input jack socket is provided for your instrument. This is a high
impedance input designed to perfectly match the impedance of the pick-ups
on a passive bass. It also has sufcient headroom available to allow active
basses to be used. Use the input gain control to adjust for the sensitivity of
your instrument (AAA-30 ONLY). Two sockets are provided on other models
for both LOW and HIGH impedance instruments separately, simply use the
input knob to set the desired input signal to suit your instrument.
APPTEK
The AppTek socket provided allows a person to connect their device using
an amp simulator on an iPhone or iPad. We have developed with Agile
Partners Amp-Kit so you are able to use an ABM modelled pre amp and
ABM-810 cab through your practice amp and also expand this with an array
of available pedals. The App/FX Mix rotary control on the AAA-120 & AAA-
300 models allows you to blend the level of FX or AppTek being fed to the
amp, working as a wet signal mix control.
E.Q.
This passive EQ has bass, middle and treble tone controls (AAA-30 &
AAA-60 ONLY). The AAA-120 & AAA-300 utilize a wider range of EQ Bass,
Lo-Mid, Hi-Mid, Treble along with a variable Mid Sweep for re-ning the mid
range of your tone. There are also Vintage/Modern Lows & Highs switches
on the front panel this alters the frequency response of the EQ for further
tone-shaping capabilities.
AAA EVO REAR PANELS:

AAA-EVO USER GUIDE
DRIVE
This adds tube-emulated overdrive as a tube amp would when adding gain,
from slight grit to full on overdrive. This is foot-switchable on the AAA-120
and AAA-300 models via a signal latching foot-switch sold separately.
Headphones
A headphone jack socket is provided (located on the front of the AAA-30
& AAA-60 and on the rear of the others) to allow stereo headphones to be
plugged into the amplier for silent practice. Just use the speaker mute
switch located on the rear of the amp.
LINE IN
A single balanced line input is provided (located on the front of the AAA-30
& AAA-60 and on the rear of the others) for play along practice. Used in
conjunction with the Headphones socket for silent practice (Also see, AUX
MIX).
BT - (100-12T-BT ONLY)
Bluetooth wireless audio is available on this model with the option to blend
the desired amount of accompaniment from you desired source, be it a
backing track or some samples. There is a blue pairing indicator on the top
panel to let you know you are paired.
AAA-EVO USER GUIDE
AUX MIX (BT LINE MIX ON 100-12T-BT ONLY)
Set the level of your Backing Track by using the ‘AUX MIX’ Rotary control
provided.
MASTER
Use the output level control to adjust the playing volume of the amplier.
REAR PANEL FACILITIES:
DI
There is a balanced post EQ Di tted to all models expect the AAA-30, This
provides a balanced out put for connecting to a PA or for recording purpos-
es. This is located on the rear on the AAA-120 & AAA-300 and on the top
panel of the AAA-60.
FX Send & Return
On the AAA-120 & AAA-300 models there is an FX loop tted for use with
FX pedals, a send and return is provided.
Speaker & Tweeter Mute
There is a speaker mute switch tted to all models for use in silent practice.
On the AAA-120 and AAA-300 there is also a tweeter mute switch to cut the
tweeter if desired.

AAA-EVO USER GUIDE
Speaker Out
There is an 8Ohm min load speaker out put located on the rear of the AAA-
60 and also the AAA-300 for use with an 8 Ohm extension speaker only.
Fused mains inlet socket
This is for connection of the unit to your countries mains power supply.
Please ensure that the type and rating of mains fuse marked on the rear
panel is used when this is replaced.
Power switch
The power to the unit is turned on with the rear panel power switch. A pow-
er led on the front panel will light to indicate that the amplier is switched
on.
AAA-EVO USER GUIDE
SPECIFICATION:
AAA-30-8
Output Power 30watts rms into 8 ohms
Speaker Unit 1 x 8” Ashdown Driver
Input Impedance 1 Meg ohm
Input Signal Range 100Mv to 10v
E.Q. Passive Bass, Middle, Treble.
AAA-60-10T
Output Power 60watts rms into 8 ohms
Speaker Unit 1 x 10” Ashdown Driver & Tweeter
Input Impedance 1 Meg ohm
Input Signal Range 100Mv to 10v
E.Q. Passive Bass, Middle, Treble.
AAA-100-12T-BT
Output Power 100watts rms into 8 ohms
Speaker Unit 1 x 12” Ashdown Driver & Tweeter
Input Impedance 1 Meg ohm
Input Signal Range 100Mv to 10v
E.Q. Passive Bass, Middle, Treble.
AAA-120-15T
Output Power 120watts rms into 8 ohms
Speaker Unit 1 x 15” Ashdown Driver & Tweeter
Input Impedance 1 Meg ohm
Input Signal Range 100Mv to 10v
E.Q. Bass, Hi-Mid, Lo-Mid, Treble & Variable Mid Sweep
AAA-300-210T
Output Power 300watts rms into 8 ohms
Speaker Unit 2 x 10” Ashdown Driver & Tweeter
Input Impedance 1 Meg ohm
Input Signal Range 100Mv to 10v
E.Q. Bass, Hi-Mid, Lo-Mid, Treble & Variable Mid Sweep