Ashley Signature Design 108735 User manual

MADE INUSA
MODEL #108735
5 drawer dresser
ASSEMBLY INSTRUCTIONS
INS-108735-4 (12-30-19)
REV 5
Thank you for purchasing this product.
THIS INSTRUCTION BOOKLET
CONTAINS IMPORTANT SAFETY
INFORMATION. PLEASE READ
AND KEEP FOR FUTURE
REFERENCE.
Lot Number: ____________________
Date Purchased: __________________
FOR REPLACEMENT PARTS
CONTACT US FIRST
For FAST, FRIENDLY and EFFICIENT service call:
Toll Free: 1-844-966-0809
Email: [email protected]
Website:WWW.ashleyfurniture.parts
Signature Design
Statesville RTA
607 Meacham Road, Statesville, NC 28677
1

Serious or fatal crushing injuries can occur from furniture tip-over.
To help prevent tip-over:
• Place heaviest items in the lowest drawers.
• Do not set TVs or other heavy objects on the top of this product.
Never allow children to climb or hang on drawers, doors, or shelves.
• Never open more than one drawer at a time.
Use of tip-over restraints only reduce, but not eliminate, the risk
of tip-over.
WARNING
WARNING: This product can expose you to chemicals including
Formaldehyde, which is known to the State of California to cause
cancer or birth defects or other reproductive harm. For more
information go to www.P65Warnings.ca.gov/furniture.
• HOW TO USE THE DOWEL(-H1/H95-) AND THE ECCENTRIC NUT(-H64-)
H64
H1
or
o
A B
or
o
DC
H64
H1
or
o
A B
or
o
DC
2

NOTE!
Work in a spacious area, preferably carpet, near the place the unit will be used.
Having a helper with building this unit will simplify and speed up the assembly
process.
Never use power tools to assemble your furniture. Power tools may strip or
damage the parts.
INSTRUCTIONS:
Gather tools listed in “Tools Required” section. Read each step carefully.
It is very important that each step is performed in the correct order. If the
steps are not performed in sequence, assembly difficulties will occur.
COMPONENTS AND HARDWARE IDENTIFICATON:
Make sure all parts are included before assembly. Lay out all the pieces for easy
identification, this will help you locate the right item when you need it.
NOTE: Some components may not be identified with labels.
DAMAGED, DEFECTIVE PARTS, OR MISSING PARTS:
If any pieces are missing or defective please contact customer service.
DO NOT RETURN ANY PARTS TO THE STORE.
If you have any questions about your new furniture, just call 1-844-966-0809
Have the part number handy when you call.
If you feel the item is defective beyond resolution with part replacements, please
return this product with your receipt to the place of purchase. Photos and additional
information may be requested to validate claim.
FURNITURE CARE:
• Never use ammonia-based cleaning products, as they will damage the finish.
• Never let liquids or damp cloths sit on this furniture.
• Do not put plastic or rubber rings under appliances, use cloth or felt protectors.
• To clean, use a soft or slightly damp cloth, then wipe with a clean, dry cloth.
• To remove part labels, gently rub a soft cloth moistened with a mild household
cleanser over the part label.
Thank you for your purchase!
3

Parts list/Lista de piezas
x5
8735-BR
8735-DF
8735-T3
PWP-ZDB-635x120
PWP-ZDSR-350x120
PWP-ZDSL-350x120
9914Z-DBM
8735-GR2
8735-GL2
CTN-8735Z-BP2
10
12
11
5
4
3
8
9
1
6
2
7
8735-LBP
8735-UBP
4

H67 x 22 H62 x 12 H60 x 20
H58 x 10 H68 x 20
st
B X 25 pcs C X 4 pcs E X 17 pcs
D X 14 pcs
G X 34 pcs H X 6 pcs I X 2 pcs J X 2 pcs
L x 2 pcs
M x 2 pcs
N x 2 pcs
E
H64 x 10
H84 x 10
H33 x 2
H53 x 30
H56 x 6
H31 x 10 H43 x 5
H79 x 1 H78 x 2
H77 x 1
HARDWARE KIT / JUEGO DE HERRAJES
H81 x 1
H82 x 1
H40 x 3
5
FINISHED EDGE
BORDE ACABADO
UNFINISHED “RAW” EDGE
BORDE SIN ACABAR

H31
H58
H60
H68
H33
H77
ACTUAL SIZE/ESCALA REAL
* TOOLS REQUIRED / HERRAMIENTAS REQUERIDAS
- HAMMER / MARTILLO
- STANDARD / PLANO
- PHILLIPS / ESTRELLA
H40
H82
6
inches

1
2
H67 x 4 H60 x 10 H84 x 5
4
3
H62 x 2
H67 x 4 H60 x 10 H84 x 5H62 x 2
7

3
H56 x 2
4
12
11
H62 x 8
H67 x 4
8
1
5

5
6
H33 x 1
H33 x 1
4
12
11
1
4
3
11
112
9

H56 x 4
7
10
4
3
5