ASL INTERCOM BT Pro LCD User manual

BT Pro LCD
Multi-Function
Frequency Generator
By
Altered States Ltd
alteredstates.net

2
Congratulations and Thank You!
You have purchased one of the finest Frequency Generators available in
the world today. This BT Pro LCD unit is designed to give you many years
of reliable service.
Please read this instruction manual carefully before use
This unit is very easy to use and the various settings and sub-programs
are easily found. For your added convenience a FAQ (Frequently Asked
Questions) section is found on page .
Also, for further study and information, a Bibliography of recommended
reading is found at the back of this manual.
There is a lot of electro-medical information freely available today from
many varied sources. Medical science in this field has certainly advanced
tremendously within the last 100 years since it was first proposed.
Currently, there is an enormous worldwide, market driven interest in this
whole subject.
We trust that this BT Pro LCD unit will help in your research as you explore
the wonderful and exciting world of frequency generation….ENJOY!
The Team at Altered States

3
INDEX
Introduction ……………………………………………………………………………………… … 2
Index ……………………………………………………………………………………………………. 3
Disclaimer ……………………………………………………………………………………………….4
Diagram ………………………………………………………………………………………………….5
Technical Specifications ……………………………………………………………………………..6
Description. ……………………………………………………………………………………………. 7
Battery Charging ……………………………………………………………………………………... 8
Internal power connection and system reset …………………………………………………...8
Entering Option Code………………………………………………………………………………….9
Intensity Adjustment ………………………………………………………………………………...10
FAQ Frequently Asked Questions……………………………………………………………… . .26
Bibliography……………………………………………………………………………………………27
SECTION 1 BT PRO LCD BASIC UNIT
BT+ ……………………………………………………………………………………………………. 11
Biofeedback ………………………………………………………………………….……………….13
SECTION 2 ADDITIONAL PROGRAMS (Add-On Programs)
BTAV…………………………………………………………………………………………………... 14
Magnastim …………………………………………………………………………………………… 15
Chakra Balance ………………………………………………………………………………………17
SleepMate ……………………………………………………………………………………………..18
BB Zapper ……………………………………………………………………………………………. 19
Colloidal Silver ………………………………………………………………………………………..21
Super Sweep Frequency Zapper …………………………………………………………………. 22
T.E.N.S.………………………………………………………………………………………………….24
Sacred Harmony …………………………………………………………………………………….. 25

4
DISCLAIMER
Please Note that our legal advisors have instructed us to issue the
following disclaimer so as to comply with international trading agreements
regarding this electronic frequency generating device.
Altered States products are sold for learning, self-improvement and
simple relaxation. No statement contained in this publication, and no
information provided by any Altered States employee, should be construed
as a claim or representation that these products are intended for use in the
diagnosis, cure, mitigation, treatment or prevention of disease or any other
medical condition. The information contained in this publication is deemed
to be based on reliable and authoritative report. However, certain persons
considered experts may disagree with one or more of the statements
contained here. Altered States assumes no liability or risk involved in the
use of the products described here. We make no warranty, expressed or
implied, other than that the material conforms to applicable standard
specifications. The publisher does not accept any responsibility for the
accuracy of the information or the consequences arising from the
application, use, or misuse of any of the information contained herein,
including any injury and/or damage to any person or property as a matter of
product liability, negligence, or otherwise. No warranty, expressed or
implied, is made in regard to the contents of this material. No claims or
endorsements are made for any drugs or compounds currently marketed or
in investigative use. This material is not intended as a guide to
self-medication. The reader is advised to discuss the information
provided with an authorized healthcare practitioner and to check product
information (including package inserts) regarding dosage, precautions,
warnings, interactions and contraindications before administering any drug,
herb, electronic tool or supplement discussed herein.

5
8765
1
2
3
4
9
10
11
DIAGRAM
1, 2: Signal input/output socket
3: DC 5volt Charge input socket
4: Electrode output socket
5: SELECT switch
6: DOWN switch
7: UP switch
8: POWER ON/OFF switch
9, 10: Biofeedback sensor pads
11: LCD display

6
TECHNICAL SPECIFICATIONS:
Power Supply: Internal 1.2V1200mAh AA Rechargeable NM
Batteries
Power Off Current: 6 mA
Charger Connector: DC socket with Ø3.6 mm Outside -, Ø1.3 mm Pin +
Charger Power: 5V DC 300mA +
Output Voltage: 3.5Vp-p ~ 50Vp-p bi-polar or 27Vmax single
polar on battery fully charged
Output Short Current: >= 5 mA @ battery fully charged
Bio-Feedback Measure Accuracy: < 10%
Input/output Connector: 3.5mm Stereo
Timer: Manual set 5 ~ 60 minutes @ 5 min. / step
Display: LCD 47mm wide x 14mm high
Case Size (maximum): 60mm width X 107mm high X 20mm depth
Weight: 85g

7
DESCRIPTION
The BT Pro LCD (LCD – liquid crystal display) is a multi-functional high
output frequency generator which combines many previous machine func-
tions into just one unit. This compact size and its powerful integrated per-
formance enhances the high precision of the output frequencies.
Every time a button is pressed, the LCD background light will be illuminat-
ed (fig.3) and it will turn off after approximately 10 seconds. If no button is
pressed within one minute, the unit will turn itself off. A beeping sound will
be heard each time a button is pressed.
When the program is finished, two beep sounds will be heard to indicate
that the process has ended and the screen will turn off. Pressing the
‘POWER’ (8) key will instantly terminate any program at any time during
processing.
Please note: For extra safety and to avoid any possibility of electrical
shock, the BT Pro LCD unit will automatically disable all functions while
the internal batteries are being charged.

8
Battery Charging:
The battery condition icon is at top left of the LCD screen (Fig 6). Full 3
blocks means battery is full, less number of blocks means less battery pow-
er. If no block is illuminated this means that battery level is very low and
must be charged. When battery is being charged, battery block will flash
from left to right. If battery is fully charged then 3 blocks will flash together.
Fig 6
Please note:
*While the battery is being charged, no programs will operate.
*The battery can be charged at anytime, no matter if it’s high or low.
*It is best to charge the battery after each use.
*Charge the battery with 5V DC adaptor only or PC USB port power.
*IMPORTANT*
Please ensure the correct adaptor is used for charging. 5 volts ONLY!
Using the incorrect charging transformer will void all warranty.
Internal power connection and system reset:
Disconnect the jumper if machine is not going to used for at least a month or during shipping.
To reset the system, pull out the jumper and wait for 5 seconds or more, then reconnect.
The battery jumper can be located at bottom of the circuit board (Fig 8). To get to the jumper,
carefully remove 4 screws at back and back cover. The cover can now be removed. After the
system reset has been completed, carefully replace the back cover and gently tighten the
screws into position.
Baery
jumper
Fig. 8
Baery icon

9
Enter option code:
The basic BT Pro LCD comes with software containing BT+ and Biofeed-
back, all other functions are optional and can be activated by purchasing
a key code. Every optional function has their unique code and associated
with its serial numbers.
To activate optional functions, press and hold UP (7) key then press
POWER (8) key, after beep release buttons then LCD displays four dash-
es (Fig 4) and first on the left will be flashing. Press UP (7) or DOWN (6)
to select code number / letter. After correct number/letter is shown then
press SELECT (5) to select next digit to enter, repeat until all 4 digits are
entered. Press SELECT (5) for confirm. If the code was matched then a
beep will sound and option name will be displayed, otherwise re-enter
code again. If nothing matched screen will be returned to the beginning.
When finished press POWER (8). This will turn off machine and matched
option code will be permanently saved into memory.
Fig 4
Check serial numbers:
Each serial number is unique and is saved into the memory of each
individual machine. It can be displayed anytime.
Press and hold DOWN (7) key then press POWER (8) key, after beep re-
lease buttons, the LCD will display a 4 digits serial number (Fig 5). This
number will be the same as the last 4 numbers on back of the machine and
top of the packing box.
Fig 5

10
Intensity adjustment:
FOR SAFETY REASONS,
ALL PROGRAMS BEGIN WITH THE INTENSITY FULLY OFF
While any program is running, press UP (7) key or increase output voltage
and DOWN (6) key to decrease output voltage. Output intensity level
correspondents to LCD intensity bar (Fig 7). More segments means higher
output level. Intensity cannot be adjusted for some of the functions like
Colloidal Silver etc.
Please note: each press of the UP (7) button will increase the intensity.
Press the UP button until you can feel a gentle ‘tingle’ or sensation from the
electrodes. Please be aware you may not feel this feeling every time, you
may need to gradually turn the intensity up as the program continues. All
programs will begin with the intensity FULLY OFF as a safety feature.
You can test the output signal by inserting the Test Plug supplied. Insert this
into the electrode OUTPUT (4) and while a program is running the red LED
will flash at the same frequency rate. This will confirm that a signal is present
at the output of this device.
Fig 7
Intensity LevelBaery icon
Output Current Test plug

11
SECTION 1 BT PRO LCD
BT+ (Brain Tuner Plus):
Our most popular
and useful Program!
BT+ (Fig 9) is the basic function and includes these frequencies:
0.5Hz, 1.5Hz, 5Hz, 7.83Hz, 10Hz, 100 Hz , BT11.
It outputs a bi-polarity equal pulse width square waveform.
Timer selections are from 5 to 60 minutes.
5 EASY STEPS TO OPERATE:
1) Press POWER (8) key to power up the machine.
2) Use UP (7) / DOWN (6) key to select function BT+.
3) When BT+ is displayed, press SELECT (5) key.
4) Use UP (7) / DOWN (6) key to select frequency (Fig 10). See next page for frequency infor-
mation.
When correct frequency is displayed press SELECT (5) key again.
5) Use UP (7) / DOWN (6) key to select the amount of minutes you want the program to run
for. (Fig 11). When correct time is showing, press SELECT (5) key to start the program.
Fig 9
Fig 10
Fig 11
While the program is running, the timer counts down in seconds (Fig 12).
Press UP (7) / DOWN (6) key for intensity adjustment. Level of Intensity is indicated on the
bar above the time display. It will always begin low, each press will increase the intensity
gradually. To avoid discomfort be careful not to turn it up too high.
Press SELECT (5) key to pause or continue program. When program is paused, timer will
stop counting down until the Select key is pressed to continue.
Fig 12
Frequency selected
Time selected
Intensity level
Time remaining

12
Ear Clip Placement:
Clean the ear lobe of any grease or dirt. Wet
the lobe with saline (salty water or saliva)
and place the electrode ear clip as shown.
FREQUENCIES
0.5Hz
The 0.5Hz DELTA brainwave frequency, normally associated with deep
sleep and release of deeply embedded stress patterns. May help with pain
relief (temporarily), natural opiates released, supports the immune system,
stress buster.
1.5Hz
May experience pain relief and can promote quiet sleep
5.0Hz
‘In the Palaces of Memory’ they suggest 5Hz as being the optimum learn-
ing frequency. Even as you read these words, a tiny portion of your brain is
physically changing. New connections are being sprouted – a circuit that
will create a stab of recognition if you encounter the words again. Supports
the body to repair and heal.
See Bibliography for more information.
7.83Hz
The 7.83Hz Alpha Theta (border) brainwave frequency and it’s associated
with a relaxed, but very focused mental state. This is also the Schumann
frequency. Ideal for meditation and relaxation.
100Hz
Elevate the mind, less stress and increase the sense of wellbeing.
BT11
Brain tuner (original Black Box), endorphin release, natural mood
enhancer.
See Bibliography for more information

13
BIOF : (Bio-Feedback)
Bio-Feedback (Fig 16) is used to measure skin resistance.
After BIOF is selected, press SELECT (5) key to start the program. There
is no timer and the intensity etc. can not be adjusted. Also there is no
output from output jack.
Hold the unit in your right hand and place the forefinger and index finger on
each bio input pad (9), (10). Measuring value will be displayed in
percentage mode or absolute resistance mode in K ohms readings.
For percentage mode (Fig 17) that value will be from 0 to 99. Lower value
means higher resistance / more relax. If no connection it will display “00”
and if short circuit it will display “SHOT”. Intensity bar corresponds to
percentage value, more bars is high and less bars is low.
For absolute resistance mode (Fig 18) press SELECT (5) key to switch
from percentage mode or press again to switch back to percentage mode.
After program has started, it may take a little while (up to 15 seconds) for
test voltage to settle and the reading to become correct.
Fig 17
Fig 16
Fig 18

14
Fig 13
Fig 14
If input signal was detected, sun symbol will come up (Fig 14). Input modulation signal frequency
should be at least less than ½ of current run frequency. For example if current run frequency is
100 Hz, then input modulation frequency should be less than 50 Hz.
To set up, plug the stereo patch cable that came with your Light and Sound (L&S) device into the
input at the top of the BT Pro LCD (1), plug the L&S headphones into the other socket (2), use the
glasses from the L&S device as per normal. You can now run the BT+ C.E.S. frequencies along
with any program from your L&S device.
BTAV: (Brain Tuner Audio Visual)
BTAV is designed to run a Light and Sound machine while using C.E.S. frequencies.
This is a very popular program for those who enjoy the added effect of an audio visual
experience while using C.E.S. (Cranial Electro Stimulation) frequencies.
Please Note: This program is compatible with the following Light & Sound machines:
Photosonix (e.g. Inner Pulse, Nova Pro, Nova Pro 100)
Symantex (Procyon, Proteus)
David Paradise machines are not compatible because they operate using different polarities.
BTAV (Fig 13) frequency and timer are the same as BT+. Output can be modulated from input
signal. Input signals inputs from sockets located at top of the machine. Two input sockets are
internally linked with same polarity that if one used for input and the other one can be used for
by pass output. When input signal is high, output turns low.
Sun symbol

15
MAGN: (Magnastim)
Magnastim (Fig 15) frequencies include: 0.5, 1, 5, 7.83, 10, 20 Hz. It outputs bi-polarity equal
pulse width square waveform. Timer selections are from 5 to 60 minutes. Frequency and timer
selection are the same as BT+.
Please note—The Headset are NOT headphones, they are magnetic electrodes which emit
frequencies.
Fig 15
FREQUENCIES:
20 Hz
Depression Using CES
Beta: outward awareness,
Important :
Using CES Cranial electrostim/Ear clips no more than 20mins per day
10.2 Hz
Depression Using CES
Chakra Frequencies, Pancreas, Liver, Stomach, Gall Bladder, 9.8 - 10.2 Hz
Nervous System, Islets of Langerhans, Dopamine: 10.2Hz
Norepinephrin / Epinephrine: 10.0Hz,
10.2Hz Healing of body, mind/body unity,
Important :
Using CES Cranial electrostim/Ear clips no more than 20mins per day
Cranial Electromagnetic Fields to Start 1 min on 5 mins off max 5 mins AC Pulse
function only.
7.83 Hz
Alpha / Theta, "Schumann Resonance.": One of the main resonance frequencies of the Earth.
Has a good reputation for: grounding, anti-jetlag, anti-mind control, improved stress tolerance.
Pituitary stimulation to release growth hormone (helps develop muscle, recover from injuries,
rejuvenation effects). 'Leaves you feeling revitalized like you've spent a day
‘In the country.' Reports of accelerated healing/enhanced learning - "the earth's natural brain-
wave”
Important :
Using CES Cranial electrostim/Ear clips no more than 20mins per day
Cranial Electromagnetic Fields to Start 1 min on 5 mins off max 5 mins AC Pulse func-
tion only.
5.00 Hz
5Hz -Increased DNA synthesis; cellular signalling; repair and healing
Lymph drainage (micro-muscular movement), best at .5Hz
In the Palaces of Memory they suggest 5 Hz as being the optimum learning frequency. Even
as you read these words, a tiny portion of your brain is physically changing. New connections
are being sprouted -- a circuit that will create a stab of recognition if you encounter the words
again... Read: In the Palaces of Memory
Endorphin: 5Hz, Problem solving
Important :
Using CES Cranial electrostim/Ear clips no more than 20mins per day
Cranial Electromagnetic Fields to Start 1 min on 5 mins off max 5 mins AC Pulse func-
tion only.

16
Fig 16
1.00 Hz
Sleep
When used with CEF is reported to help with depression
This frequency can lead you to an "altered state of conscience" favourable to a deep sleep
Important :
Using CES Cranial electrostim/Ear clips no more than 20mins per day
Cranial Electromagnetic Fields to Start 1 min on 5 mins off max 5 mins AC Pulse function
only.
0.5 Hz
To support the reduction of panic attacks, stress, anxiety and to help promote Fast Relaxation,
Sleep
Important :
Using CES Cranial electrostim/Ear clips no more than 20mins per day
Cranial Electromagnetic Fields to Start 1 min on 5 mins off max 5 mins AC Pulse function
only.
Do not combine The Magnastim CEF Headset with other mind machines in real-time. Light
and sound devices (that use binaural beats or flashing lights), CES (Cranial Electromagnetic
Stimulation), TENS (transcutaneous [through the skin] electrical nerve stimulation) devices
adapted for neural use, common magnets held in place with a headband, and crystals driven by
electricity of any kind are only some of the many 'mind machines'. Negative effects have been
reported from the simultaneous use of Magnastim with other mind machines. However, when
they are used about two hours AFTER a Magnastim session, their effects can be amplified.
Frequencies cont.
To Set up: Fig. 16
Insert stereo patch lead into the output (4) of the BT Pro LCD unit. Insert the other end into the
input of the TMS device. Insert the Magnastim Headset into the “Headset” output on the TMS
device. Plug the 12 volt power supply into this to operate. BE SURE TO USE ONLY THE POW-
ER SUPPLY THAT CAME WITH EACH DEVICE! Do not mix the power supplies up as some
devices require different voltage power. The TMS device acts as an amplifier that sends the
frequencies to the Headset electrodes. Please note that these are not headphones. A magnetic
frequency is emitted from the electrodes. Select the desired program the same as running a
BT+ program (see page 11).
Magnastim Headset
plugs into
“HEADSET” on TMS
BT Pro LCD with
‘MAGN’ selected
Stereo patch lead
From ‘Output’
on BT Pro to ‘INPUT’
on TMS
12 volt Power
Supply for
TMS adaptor

17
CHBL: (Chakra Balance)
This is a user friendly program and very easy to operate. No physical connection to the body
is required. Your body simply receives frequencies being generated by the Magnacoil which
sits under or next to the body. This is a great relaxing and balancing frequency range for our 7
main Chakra areas.
Chakra Balance (Fig 19) will run 7 programs / frequencies in cycle of 5 minutes for each fre-
quency. Total run time will be 10 cycles. Outputs equal pulse width bi-polarity square wave-
form and output intensity can be adjusted during program run. Press UP (7) / DOWN (6) key
for intensity adjustment during program running.
Fig 19
Sub programs are:
1, ROOT (Root / Muladhara 194.18 Hz)
2, SACL (Sacral / Svadhisthana 210.42 Hz)
3, SOLR (Solar Plexus / Manipura 126.22 Hz)
4, HERT (Heart / Anahata 136.10 Hz)
5, THRT (Throat / Vishuddha 141.27 Hz)
6, THRD (Thrid Eye / Ajna 221.23 Hz)
7, CRWN (Crown / Sahasrara 172.06 Hz)
Fig 20
While a program is running, screen will display each program’s title (Fig 20) with clock dots
flashing to indicate the timer is counting. Press SELECT (5) key will pause current program
changes that will stay as current frequency. Title also flashes to indicate frequency. Press
SELECT (5) key again will push frequency change to another one and carry on the cycle.
Fig 21
To Set up: (fig 21)
Insert stereo patch lead into the output (4) of the BT Pro LCD unit. Insert the other end into
the input of the TMS COIL device. Insert the MagnaCoil into the “COIL” output on the TMS
device. Plug the power supply into this to operate. BE SURE TO USE ONLY THE POWER
SUPPLY THAT CAME WITH EACH DEVICE! Do not mix the power supplies up as some
devices require different voltage power. The TMS device acts as an amplifier that sends the
frequencies to the MagnaCoil. Place this under or next to the body.
Stereo patch lead
From ‘Output’
on BT Pro to ‘INPUT’
on TMS
BT Pro LCD with
‘CHBL’ selected
Magnacoil
plugs into
“COIL” on TMS
24 volt Power
Supply for
TMS adaptor

18
SleepMate: (SLPM)
SleepMate (Fig 22) contains 4 sub programs: After function is select, press SELECT (5) key
will go to sub program (Fig 23) selection then press SELECT (5) key again to start.
Use the Magnastim Coil (with power adaptor and TMS amplifier) to generate frequencies.
Place under or next to the pillow.
Or alternatively, you can use the ear clips instead of the MagnaCoil and TMS adaptor.
Fig 22
CTNP (CATNAP):
1) 3.59HZ-------10 min.
2) 5HZ----------2 min.
3) 7.8Hz--------2 min.
4) 12Hz---------2 min.
5) 20Hz---------4 min.
SLEP (SLEEP):
1) 20Hz---------2 min.
2) 12Hz---------2 min.
3) 4.9Hz--------2 min.
4) 2.5Hz--------3 min.
5) 0.5Hz--------10 min.
INSN (INSOMNIA):
1) 20Hz---------2 min.
2) 12Hz---------2 min.
3) 7Hz----------2 min.
4) 5Hz----------3 min.
5) 1Hz----------3 min.
6) 0.1Hz--------5 min.
7) 0.05Hz-------10 min.
WKUP (WAKEUP):
1) 10Hz---------3 min.
2) 12Hz---------3 min.
3) 20Hz---------3 min.
4) 40Hz---------3 min.
5) 100Hz--------2 min.
Fig 23
When program is running, screen will show each step of the sub programs (Fig 24). “ST: 1”
means STEP 1. Clock double dots flashing indicates timer is counting.
Fig 24

19
BBZP: (BB Zapper)
This is a very useful and well-researched program. Many people have reported beneficial
results using this program as part of a detoxification protocol. Individual results may vary.
BB Zapper (Fig 25) runs 4 Hz equal pulse width bi-polarity square waveform to output. Intensi-
ty can be adjusted during program running. Run timer can be selected from 5 to 60 minutes.
Screen will display timer counting down during program runs.
Fig 25
Zapper Mode
This information here is based on BB’s original protocol for using the blood electrifier and
colloidal silver generator. Please read this protocol to understand this procedure better.
According to his research, he found a way to kill all known viruses with a four pronged treat-
ment: 1) Ozonated water 2) Colloidal silver water 3) blood purifier (zapping device) 4) Magnet-
ic pulsar.
This unit is made to the exact specifications designed by BB. It can be used in for numbers
#2, #3 as listed above. As all people are different, results may vary. These units are most
effective when used according to BBs’ protocol. Nothing is guaranteed. Put simply, the closer
you match this protocol, the better results you may achieve.
Research from Harvard, MIT and Albert Einstein College of Medicine has shown that micro
currents are known to eliminate viruses, parasites, fungi, bacteria and pathogens in the blood.
This unit emits those same micro currents.
It has been a long known fact, that silver colloids greatly assist in eliminating known patho-
gens and prevents opportunistic infections.
Before zapping, it is very important to eliminate ALL herbs (including garlic), dietary supple-
ments, alcohol, recreational drugs and medications. Stop taking these at least 24 hours prior
to using the zapper (preferably 4-7 days before zapping). You may then take medicine or
vitamins straight AFTER zapping. This is because zapping can allow medicines, drugs and
herbs to enter the body’s’ cells and it can actually magnify their effect 20-30 times so while
you are zapping with these in your body, the supplements are amplified dramatically.
Zapping times can vary between 15 minutes a day to 2 hours a day.
Please Note: Read the information on page 20 very carefully. Take your time and gently
proceed as per the suggested instructions.

20
BB Zapper continued: Zapper Electrodes:
It is very important to drink at least 3-4 glasses of filtered or purified water (even dis-
tilled water) during the zapping process. This will help to flush your system and allow
“detoxification” to occur. YOU MUST DRINK PLENTY OF WATER WHILE ZAPPING or
you will not detoxify your body correctly.
It is important to place the electrodes correctly otherwise zapping will not be effective.
Keep the space between the electrodes dry.
Connect the electrodes to your wrist as specified, plug lead into ‘output’ BEFORE switching
unit on. We suggest setting the intensity to ‘low’ to begin.
Everybody will have a different skin resistance, so people will ‘feel’ different effects. The differ-
ent ‘intensity’ settings will accommodate most people. BE AWARE – you may not always ‘feel’
the zapping effect. This does not matter, the frequencies WILL be received, it’s just that your
body will have adjusted its’ own skin resistance as a reaction to the zapping.
Insert the silver electrodes into the cotton sleeves. Mix up a small amount of purified water
with sea salt and wet the cotton sleeves with this solution. This is a saline solution which will
aid with conductivity between the electrodes and your skin. Do not place the electrodes on
bare skin as they may irritate.
Set up:
Connect the silver electrodes to the wrist first following the steps above.
Turn POWER (8) on, scroll up or down to BBZP and press SELECT (5)
Select desired time by scrolling up or down and press SELECT (5)
The program will now begin. Be aware that the intensity will be fully DOWN at the begin-
ning (for safety reasons), press the UP (7) arrow to increase the intensity to a comfortable
level (each press will increase the intensity).
The unit will switch off automatically after the timer has finished.
Place the Velcro wriststrap on the wrist Slide the silver electrodes under the Velcro and place over the
radial and ulnar arteries (where your pulse is located)