ASL INTERCOM 138 User manual

ASL 558 ATOM Bluetooth Wireless Mouse Emulator
The ASL 558 ATOM Bluetooth Wireless Mouse Emulator works in three, four or five switch functions
depending on client’s functional abilities. The dial settings are a custom feature which will allow
adjustments of the directional input from the Joystick Bluetooth Interface to the Mouse Emulator.
When in user mode the function of the joystick directions can be changed to 4 switch where the
forward joystick direction can be mouse up and down, the joystick left direction can be mouse left
and the joystick right direction can be mouse right. This also allows the joystick reverse direction to
be left mouse click, which works well for anyone that has a difficult time accessing a separate switch
for mouse click. There are 12 switches to adjust speed, response times and the latch/drag delay times.
The On switch is to select MAC or PC platform.
ASL 540 12 Volt Rechargeable Battery and Charger with 9-pin Connector
The ASL 540 12 Volt Rechargeable Battery and Charger with 9-pin connector allows one to take an
ATOM digital drive control with a 9-pin connector and move it to a manual wheelchair. This allows
a patient to have access to their technology consistently since the ATOM drive control will connect
wirelessly to the ASL Accessories like the ASL 557-3 ATOM Bluetooth Wireless Switch Interface, ASL
558 ATOM Wireless Bluetooth Mouse Emulator, or the ASL 545E Tecla Shield. It is rechargeable and can
be used while being charged. The battery will last up to three day and has a battery level indicator.
ASL 557-3 ATOM Bluetooth Wireless Switch Receiver
The ASL 557-3 ATOM Bluetooth Wireless Switch Receiver is intended to be used for Bluetooth
wireless access to communication devices, TECLA Shield, TECLA E, or switch interfaces on
a computer. The USB side plugs into a communication device directly, or into a computer.
Each plug corresponds to the direction of the Bluetooth Joystick (forward, right or left).
You can connect the plugs to the scan and select ports of a communication device, switch
interface or TECLA ports. If using with the TECLA products, you need a rechargeable battery.
ASL 545E Tecla - Bluetooth Interface
Tecla is a cloud connected assistive device that provides users with control of their smart
device and enviroment. Using Bluetooth, Tecla connects directly to ATOM technology whenever
the ATOM is in wireless mode. ATOM technology speaks directly to the Tecla which is able
to connect up to 8 devices. You can use Tecla with iPhone, iPad, iPad Touch, Mac computers
with switch control, Apple TV’s with switch control, Android devices with switch access,
Samsung devices with universal switch and Windows computers with scanning software.
ASL 138 Extremity Control Joystick
Adaptive Switch Laboratories, Inc. www.asl-inc.com
SCAN FOR PROGRAMMING
INFORMATION
CONNECTION REQUIREMENTS:
LiNX Connector or Input Module
MK6i Connector
Omni or Omni 2
Enhanced Display or SCIM
Adaptive Switch Laboratories, Inc. www.asl-inc.com PH: 800-626-8698, FX: 830-798-6221 Rev 8-2019
EXTREMITY CONTROL ACCESSORIES
The ASL 138 Extremity Control Joystick is warranted to be free from manufacturing defects
for two years from date of purchase.
WARRANTY
This warranty shall not cover equipment modified or repaired by unauthorized personnel. ASL cannot be held responsible for damage caused by incorrect
installation or incorrect use of the product. Misuse, mishandling, or storage is not covered by this warranty. The foregoing express warranty is exclusive and in
lieu of any other warranties of any kind, whether express or implied, including the implied warranties of merchantability or fitness for a particular purpose, and
is the sole and exclusive remedy for any defective product. The health care professional is responsible for understanding the intended use of the ASL equipment
and the specification and safe programming parameters of the chair it is going on. The wheelchair manufacturer is responsible for testing and verification of
the completed wheelchair equipped with the ASL 138 Extremity Control Joystick to ISO, RESNA or other applicable standards including RFI compatibility. RFI
interference can impact the proper functioning of the wheelchair. Route and secure all cables in such a way in order to prevent damage by crushing, cutting or
snagging. Incorrect installation, configuration, or programming could result in unsafe set up of the wheelchair for the user. ASL accepts no liability for losses of
any kind which result for such conditions.
SECURITY MEASURES
A reset switch should always be plugged into a reset port programmed to stop the chair and be available in
case of emergency to stop movement of the wheelchair.
Installation of the ASL 138 Extremity Control Joystick and the programming of the wheelchair electronics
should only be conducted by a specialist with an in depth technical knowledge of the ASL 138 Extremity
Control Joystick and the wheelchair electronics. All testing and verification of the completed wheelchair
equipment with the ASL 138 Extremity Control Joystick to ISO/RESNA or applicable standards for the completed
wheelchair, including RFI compatibility testing, is the sole responsibility of the wheelchair manufacturer.
The ASL 138 Extremity Control Joystick is susceptible to moisture. If liquid or debris get into the top of the
joystick, it can cause the Extremity Control to not function properly resulting in an error code or the chair
may exhibit unwanted movement. Do not operate the ASL 138 Extremity Control Joystick in rain or snow.
ATOM Technology
Powered by

Forward Indicator =
Cable Extending Out Right Side
BOTTOM VIEW OF
138 JOYSTICK
DIMENSIONS
ASL 138 Extremity Control Joystick
BOTH IN DOWN: Regular Control
SWITCH 1 IN UP: 3 Directional Proportional
INTERFACE BOX:
2SLIDE SWITCHES
DETAIL:
DIP SWITCH
2.38”
MULTIPLE
CONNECTOR
OPTIONS
1.25”
4.38”
DIP SWITCH
0.94”
4.40”
60”
LONG WIRE
BLUETOOTH INTERFACE BOX EXPLANATION
USER PORT: Any activation of a switch in the User Port
will put the joystick into Bluetooth Mode. This will be
indicated by a long beep.
BLUETOOTH PAIRING SWITCH:
Push to start the pairing
process.
LEFT/RIGHT MOUSE CLICK PORT:
Stereo Connector is for both
left and right click. Mono Jack
Plug is for left mouse click.
Mono Jack default is left click.
This switch must be plugged in
before chair is powered up or
it will not be recognized.
BLUETOOTH STATUS INDICATOR:
If flashing Bluetooth is not
paired. When solid, Bluetooth
is paired.
CHIN
ASL 625A ALUMINUM
COLLAR MOUNT 
Small
ASL 625 ALUMINUM
COLLAR MOUNT 
Standard
ASL 628 SWING AWAY HEADREST MOUNT
REPLACEMENT
PARTS
FOAM TIPS
MOUNTING OPTIONS
HAND
ASL 603 DRIVING
PLATFORM
ASL 660 NUCLEUS
MIDLINE MOUNT
ASL 613 FLEX ARM
MOUNTING HARDWARE
(includes ASL 644 Mounting Ring)
JOYSTICK AT FULL THROW
It takes only 90 grams of force
to displace from neutral and
requires only 3.5 millimeters
of movement to reach full
throw.