ASROCK Rack E3C246D4M-4L User manual

E3C246D4M-4L
E3C242D4M-4L
User Manual
Version 1.0
Published January 2019
Copyright©2019 ASRock Rack INC. All rights reserved.

Version 1.0
Published January 2019
Copyright©2019 ASRock Rack Inc. All rights reserved.
Copyright Notice:
No part of this documentation may be reproduced, transcribed, transmitted, or
translated in any language, in any form or by any means, except duplication of
documentation by the purchaser for backup purpose, without written consent of
ASRock Rack Inc.
Products and corporate names appearing in this documentation may or may not
be registered trademarks or copyrights of their respective companies, and are used
only for identication or explanation and to the owners’ benet, without intent to
infringe.
Disclaimer:
Specications and information contained in this documentation are furnished
for informational use only and subject to change without notice, and should not
be constructed as a commitment by ASRock Rack. ASRock Rack assumes no
responsibility for any errors or omissions that may appear in this documentation.
With respect to the contents of this documentation, ASRock Rack does not provide
warranty of any kind, either expressed or implied, including but not limited to
the implied warranties or conditions of merchantability or tness for a particular
purpose.
In no event shall ASRock Rack, its directors, ocers, employees, or agents be liable
for any indirect, special, incidental, or consequential damages (including damages
for loss of prots, loss of business, loss of data, interruption of business and the
like), even if ASRock Rack has been advised of the possibility of such damages
arising from any defect or error in the documentation or product.
is device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
CALIFORNIA, USA ONLY
e Lithium battery adopted on this motherboard contains Perchlorate, a toxic substance
controlled in Perchlorate Best Management Practices (BMP) regulations passed by the
California Legislature. When you discard the Lithium battery in California, USA, please
follow the related regulations in advance.
“Perchlorate Material-special handling may apply, see www.dtsc.ca.gov/hazardouswaste/
perchlorate”
ASRock Rack’s Website: www.ASRockRack.com

Contact Information
If you need to contact ASRock Rack or want to know more about ASRock Rack,
you’re welcome to visit ASRock Rack’s website at www.ASRockRack.com; or you
may contact your dealer for further information.
ASRock Rack Incorporation
6F., No.37, Sec. 2, Jhongyang S. Rd., Beitou District,
Taipei City 112, Taiwan (R.O.C.)

Contents
Chapter 1 Introduction 1
1.1 Package Contents 1
1.2 Specications 2
1.3 Unique Features 6
1.4 Motherboard Layout 7
1.5 Onboard LED Indicators 13
1.6 I/O Panel 15
1.7 Block Diagram 17
Chapter 2 Installation 18
2.1 Screw Holes 18
2.2 Pre-installation Precautions 18
2.3 Installing the CPU 19
2.4 Installing the CPU Fan and Heatsink 21
2.5 Installation of Memory Modules (DIMM) 22
2.6 Expansion Slots (PCI Express Slots) 24
2.7 Jumper Setup 25
2.8 Onboard Headers and Connectors 27
2.9 Dr. Debug 34
2.10 Unit Identication purpose LED/Switch 35
2.11 Driver Installation Guide 35
2.12 Dual LAN and Teaming Operation Guide 36
2.13 M.2_SSD (NGFF) Module Installation Guide 37

Chapter 3 UEFI Setup Utility 40
3.1 Introduction 40
3.1.1 UEFI Menu Bar 40
3.1.2 Navigation Keys 41
3.2 Main Screen 42
3.3 Advanced Screen 43
3.3.1 CPU Conguration 44
3.3.2 DRAM Conguration 47
3.3.3 Chipset Conguration 48
3.3.4 Storage Conguration 50
3.3.5 ACPI Conguration 51
3.3.6 USB Conguration 52
3.3.7 Super IO Conguration 53
3.3.8 Serial Port Console Redirection 54
3.3.9 H/W Monitor 57
3.3.10 Runtime Error Logging 59
3.3.11 Intel SPS Conguration 60
3.3.12 Intel(R) Bios Guard Technology 61
3.3.13 Instant Flash 62
3.4 Server Mgmt 63
3.4.1 System Event Log 64
3.4.2 BMC Network Conguration 65
3.5 Security 67
3.5.1 Key Management 68

3.6 Boot Screen 72
3.6.1 CSM Parameters 74
3.7 Event Logs 76
3.8 Exit Screen 77
Chapter 4 Software Support 78
4.1 Install Operating System 78
4.2 Support CD Information 78
4.2.1 Running The Support CD 78
4.2.2 Drivers Menu 78
4.2.3 Utilities Menu 78
4.2.4 Contact Information 78
Chapter 5 Troubleshooting 79
5.1 Troubleshooting Procedures 79
5.2 Technical Support Procedures 81
5.3 Returning Merchandise for Service 81
Appendix Mezzanine Card Support List 82

E3C246D4M-4L / E3C242D4M-4L
PB 1
English
Chapter 1 Introduction
ank you for purchasing ASRock Rack E3C246D4M-4L / E3C242D4M-4L
motherboard, a reliable motherboard produced under ASRock Rack’s consistently
stringent quality control. It delivers excellent performance with robust design
conforming to ASRock Rack’s commitment to quality and endurance.
In this manual, chapter 1 and 2 contains introduction of the motherboard and step-
by-step guide to the hardware installation. Chapter 3 and 4 contains the conguration
guide to BIOS setup and information of the Support CD.
1.1 Package Contents
• ASRock Rack E3C246D4M-4L / E3C242D4M-4L Motherboard
(ATX Form Factor: 12-in x 9.6-in, 30.5 cm x 24.4 cm)
• Quick Installation Guide
• 1 x SATA3 Cable (60cm)
• 1 x I/O Shield
• 1 x Screw for M.2 Socket
If any items are missing or appear damaged, contact your authorized dealer.
Because the motherboard specications and the BIOS soware might be updated, the con-
tent of this manual will be subject to change without notice. In case any modications of
this manual occur, the updated version will be available on ASRock Rack website without
further notice. You may nd the latest memory and CPU support lists on ASRock Rack
website as well. ASRock Rack’s Website: www.ASRockRack.com
If you require technical support related to this motherboard, please visit our website for
specic information about the model you are using.
http://www.asrockrack.com/support/

2 3
English
1.2 Specications
E3C246D4M-4L / E3C242D4M-4L
MB Physical Status
Form Factor ATX
Dimension 12'' x 9.6'' (30.5 cm x 24.4 cm)
Processor System
CPU Supports Intel® Xeon® E-2100 Processors
Chipset E3C246D4M-4L:
Intel® C246
E3C242D4M-4L:
Intel® C242
System Memory
Capacity - 4 x 288-pin DDR4 DIMM slots
- Support up to 64GB DDR4 ECC/non-ECC UDIMM
Type - Dual Channel DDR4 memory technology
- Supports DDR4 2666/2400 ECC/non-ECC U DIMM
DIMM Size Per
DIMM
ECC and non-EDD UDIMM : 64GB, 32GB, 16GB, 8GB, 4GB
DIMM
Frequency
- ECC UDIMM: 2666/2400/2133 MHz
- Non-ECC UDIMM: 2666/2400/2133 MHz
Voltage 1.2V
Expansion Slot
PCIe 3.0 x16 SLOT6: Gen3 x16 link (when Mezz slot used, Slot6 Gen3 x8)
PCIe 3.0 x8 SLOT2: Gen3 x8 link (ME), Gen3 x4 link(EE)
PCIe 3.0 x1 E3C246D4M-4L:
- SLOT5: Gen3 x1 link
- SLOT4: Gen3 x1 link
- SLOT3: Gen3 x1 link
E3C242D4M-4L:
N/A
Mezz Slot 1 (shared with Slot6), supports M350, M540, M599, M710
Storage
SATA
Controller
E3C246D4M-4L:
-C246: 8x SATA3 6Gb/s (SATA0-7, SATA0 support SATA
DOM, and are shared with M.2(PCIE3.0(X4))/ SATA3 6Gb/s),
support RAID 0, 1, 5, 10
E3C242D4M-4L:
-C242: 6x SATA3 6Gb/s (SATA0-5, SATA0 support SATA
DOM, and are shared with M.2(PCIE3.0(X2))/ SATA3 6Gb/s),
support RAID 0, 1, 5, 10

E3C246D4M-4L / E3C242D4M-4L
2 3
English
Ethernet
Interface 1000 /100 /10 Mbps
LAN - 3 x RJ45 GLAN by Intel® i210
- 1 x RJ45 GLAN by Intel® i219
- Supports Wake-On-LAN
- Supports Energy Ecient Ethernet 802.3az
- Supports Dual LAN with Teaming function(TBD)
- Supports PXE
- LAN2 supports NCSI
Management
BMC Controller ASPEED AST2500
IPMI Dedicated
GLAN
1 x Realtek RTL8211E for dedicated management GLAN
Features - Watch Dog
- NMI
Graphics
Controller ASPEED AST2500
VRAM DDR4 16MB
Rear Panel I/O
VGA Port 1 x D-Sub
USB 3.1 Port E3C246D4M-4L:
4(GEN2)
E3C242D4M-4L:
2(GEN2), 2(GEN1)
LAN Port - 4 +1 RJ45 Gigabit Ethernet LAN ports
- LAN Ports with LED (ACT/LINK LED and SPEED LED)
UID Button/
LED
1
Serial port 1
Internal Connector
Auxiliary Panel
Header
1 (include chassis intrusion , location button & LED, front
LAN LED, event log LED, and FSMB)
SATA DOM 1 (SATA 0, share with M.2)
TPM Header 1
IPMB Header 1
80 debug port
LED
1
Front Panel 1 (RST, PWRBTN, HDDLED, PWRLED)
Fan Header 6 (1xCPU/4xFront/1xRear)
ATX Power 1x (24-pin) + 1x (8-pin)
Speaker 1(4pin)
TR1 1

4 5
English
Buzzer 1
SGPIO 2
BMC_SMB1 1
PSU_SMB1 1
Smbus from
BMC
1
PWR_SMB 1
USB 3.0 Type A 1 (by bom option for USB3.0 or USB2.0)
* when USB 2.0 Type Ax1, USB 3.0 header x 2 port
* when USB 3.0 Type Ax1, USB 3.0header x1 port
USB 3.0 Header 1 (support 2 USB 3.0, by bom option for 2 port USB3.0 or 1
port USB3.0)
* when 2 port USB 3.0, 1port USB 2.0 Type A
* when 1 port USB 3.0, 1port USB 3.0 Type A
USB 2.0 Header 2 (support 4 USB 2.0)
M.2 E3C246D4M-4L:
1 (2230/2242/2260/2280, Supports PCIE3.0(X4)/SATA3)
E3C242D4M-4L:
1 (2230/2242/2260/2280, Supports PCIE3.0(X2)/SATA3)
NMI Button 1 (Header)
ME/SPS
recovery
1
ClearCMOS 1 (short pin)
OH/FanFail
LED
6 (only Fan Fail LED)
System BIOS
BIOS Type 256Mb AMI UEFI Legal BIOS
BIOS Features -Plug and Play (PnP)
-ACPI 2.0 Compliance Wake Up Events
-SMBIOS 2.8.0 Support
-ASRock Rack Instant Flash
Hardware Monitor
Temperature -CPU Temperature Sensing
-System Temperature Sensing
-MB / Card Side Temperature Sensing
-TR1 Temperature Sensing
Fan -CPU/Rear/Front Fan Tachometer
-CPU Quiet Fan (Allow Chassis Fan Speed Auto-Adjust by
CPU Temperature)
-CPU/Rear/Front Fan Multi-Speed Control
Voltage Voltage Monitoring: +12V, +5V, +3.3V, CPU Vcore, VCCM,
VCCIO, VCCSA, VCCST_SFR,V1.0M, 3VSB, 5VSB, VBAT

E3C246D4M-4L / E3C242D4M-4L
4 5
English
is motherboard supports Wake from on Board LAN. To use this function, please make
sure that the “Wake on Magic Packet from power o state” is enabled in Device Manager
> Intel® Ethernet Connection > Power Management. And the “PCI Devices Power On” is
enabled in UEFI SETUP UTILITY > Advanced > ACPI Conguration. Aer that, onboard
LAN1&2 can wake up S5 under OS.
If you install Intel® LAN utility or Marvell SATA utility, this motherboard may fail Win-
dows® Hardware Quality Lab (WHQL) certication tests. If you install the drivers only, it
will pass the WHQL tests.
Support OS
OS Microso® Windows®
- Server 2012 R2 (64 bit)
- Server 2016 (64 bit)
- Server 2019 (64 bit)
Linux®
- RedHat Enterprise Linux Server 6.9 (64 bit) / 7.4 (64 bit)
- SUSE Enterprise Linux Server 11 SP4 (64 bit) / 12 SP3 (64 bit)
- Ubuntu 16.04 (64 bit) / 18.04 (64 bit)
Virtual
- VMWare® ESXi 6.5 u1
- Win hyper-V Server 2016
*Please refer to our website for the latest OS support list.
Environment
Temperature Operation temperature: 10°C ~ 35°C / Non operation
temperature: -40°C ~ 70°C

6 7
English
1.3 Unique Features
ASRock Rack Instant Flash is a BIOS ash utility embedded in Flash ROM. is con-
venient BIOS update tool allows you to update system BIOS without entering operat-
ing systems rst like MS-DOS or Windows®. With this utility, you can press the <F6>
key during the POST or the <F2> key to enter into the BIOS setup menu to access
ASRock Rack Instant Flash. Just launch this tool and save the new BIOS le to your
USB ash drive, oppy disk or hard drive, then you can update your BIOS only in a
few clicks without preparing an additional oppy diskette or other complicated ash
utility. Please be noted that the USB ash drive or hard drive must use FAT32/16/12
le system.

E3C246D4M-4L / E3C242D4M-4L
6 7
English
1.4 Motherboard Layout
E3C246D4M-4L
DDR3_B1 (64 bit, 240-pin module)
DDR3_A1 (64 bit, 240-pin module)
ATXPWR1
CPU_FAN1
COM1
VGA1
FRNT_FAN1
LAN2
IPMI
LAN
DDR4_B1 (64 bit, 288-pin module)
DDR4_B2 (64 bit, 288-pin module)
DDR3_B1 (64 bit, 240-pin module)
DDR3_A1 (64 bit, 240-pin module)
DDR4_A1 (64 bit, 288-pin module)
DDR4_A2 (64 bit, 288-pin module)
1
PSU_SMB1
ATX12V1
11
SATA_0
SATA_1
SATA_2
SATA_3
SATA_4
SATA_5
IPMB_1
BMC_SMB_1
SATAPWR1
REAR_FAN1
LAN1
USB 3.1
T: USB_1
B: USB_2
LAN4
LAN3
1
1
1
FRNT_FAN2
FRNT_FAN3
SATA_PWR1
BAT1
Intel
C246
Dr.
Debug
1
TPM1
PANEL1
1
AUX_PANEL1
HDLED RESET
PLED PWRBTN
1
USB31_7
USB_1_2
1
1
USB31_5_6
11
SEC_OR1
UID1
9
10
11
12
13
14
15
24.4cm (9.6 in)
E3C246D4M-4L
PCIE6
BIOS
ROM
PCIE2
MEZZ_1
ME_RECOVERY1
11
PECI1
30.5cm (12in)
29
30
3132
35
36
37
38
44
45
(x16)
(ME x8, EE x4)
1
1
1
NCSI_SEL1
LED_LAN_3_4
LED_LAN_5_6
BUZZER1
1
PWM_CFG1
SATA_SGPIO2
SATA_SGPIO1
11
FRNT_FAN4
1
SPEAKER1
USB_3_4
1
34
M2_1
NUT110_1
NUT80_1
NUT60_1
NUT42_1
NUT30_1
USB 3.1
T: USB_3
B: USB_4
16
17
20
21
22
23
24
25
1234578
6
18
19
26
33
43
46
47
48
SATA_6
SATA_7
27
28
PCIE3
(x1)
PCIE4
(x1)
PCIE5
(x1)
39
41
42
CLRMOS1
40

8 9
English
No. Description
1 BMC SMBus Header (BMC_SMB_1)
2 ATX 12V Power Connector (ATX12V1)
3 Intelligent Platform Management Bus Header (IPMB_1)
4 ME Recovery Jumper (ME_RECOVERY1)
5 PWM Conguration Header (PWM_CFG1)
6 Rear Fan Connector (REAR_FAN1)
7PSU SMBus (PSU_SMB1)
8 ATX Power Connector (ATXPWR1)
9 2 x 288-pin DDR4 DIMM Slots (DDR4_A1, DDR4_B1, Blue)
10 2 x 288-pin DDR4 DIMM Slots (DDR4_A2, DDR4_B2, White)
11 CPU Fan Connector (CPU_FAN1)
12 Front Fan Connector (FRNT_FAN1)
13 Front Fan Connector (FRNT_FAN2)
14 Front Fan Connector (FRNT_FAN3)
15 SATA3 DOM Connector (SATA_0), Red
16 SATA3 Connector (SATA_1)
17 SATA SGPIO Connector (SATA_SGPIO1)
18 SATA SGPIO Connector (SATA_SGPIO2)
19 SATA DOM Power Jumper (SATAPWR1)
20 CPU PECI Mode Jumper (PECI1)
21 SATA DOM Power Header (SATA_PWR1)
22 Front Fan Connector (FRNT_FAN4)
23 SATA3 Connector (SATA_2)
24 SATA3 Connector (SATA_3)
25 SATA3 Connector (SATA_4)
26 SATA3 Connector (SATA_5)
27 SATA3 Connector (SATA_6)
28 SATA3 Connector (SATA_7)
29 Chassis Speaker Header (SPEAKER1)
30 System Panel Header (PANEL1)
31 Auxiliary Panel Header (AUX_PANEL1)
32 USB 2.0 Header (USB_1_2)
33 Flash Descriptor Security Override Jumper (SEC_OR1)

E3C246D4M-4L / E3C242D4M-4L
8 9
English
No. Description
34 USB 2.0 Header (USB_3_4)
35 Vertical Type A USB 3.1 Gen1 Connector (USB31_7)
36 USB 3.1 Gen1 Header (USB31_5_6)
37 TPM Header (TPM1)
38 PCIE Card Slot 2 (PCIE2) (ME x8, EE x4, from PCH)
39 PCIE Card Slot 3 (PCIE3) (x1, from PCH)
40 Clear CMOS Pad (CLRMOS1)
41 PCIE Card Slot 4 (PCIE4) (x1, from PCH)
42 PCIE Card Slot 5 (PCIE5) (x1, from PCH)
43 M.2 Socket (M2_1) (Type 2230/2242/2260/2280/22110)
44 PCIE Card Slot 6 (PCIE6) (x16, from CPU)
45 Mezzaine Card Slot (MEZZ_1)
46 NCSI Mode Jumper (NCSI_SEL1)
47 LAN LED Connector (LED_LAN_3_4)
48 LAN LED Connector (LED_LAN_5_6)
For DIMM installation and conguration instructions, please see p.22 (Installation of Memory Modules (DIMM))
for more details.

10 11
English
E3C242D4M-4L
DDR3_B1 (64 bit, 240-pin module)
DDR3_A1 (64 bit, 240-pin module)
ATXPWR1
CPU_FAN1
COM1
VGA1
FRNT_FAN1
LAN2
IPMI
LAN
DDR4_B1 (64 bit, 288-pin module)
DDR4_B2 (64 bit, 288-pin module)
DDR3_B1 (64 bit, 240-pin module)
DDR3_A1 (64 bit, 240-pin module)
DDR4_A1 (64 bit, 288-pin module)
DDR4_A2 (64 bit, 288-pin module)
1
PSU_SMB1
ATX12V1
11
SATA_0
SATA_1
SATA_2
SATA_3
SATA_4
SATA_5
IPMB_1
BMC_SMB_1
SATAPWR1
REAR_FAN1
LAN1
USB 3.1
T: USB_1
B: USB_2
LAN4
LAN3
1
1
1
FRNT_FAN2
FRNT_FAN3
SATA_PWR1
BAT1
Intel
C242
Dr.
Debug
1
TPM1
PANEL1
1
AUX_PANEL1
HDLED RESET
PLED PWRBTN
1
USB31_7
USB_1_2
1
1
USB31_5_6
11
SEC_OR1
UID1
9
10
11
12
13
14
15
24.4cm (9.6 in)
E3C242D4M-4L
PCIE6
BIOS
ROM
PCIE2
MEZZ_1
ME_RECOVERY1
11
PECI1
30.5cm (12in)
27
28
2930
33
34
35
36
39
40
(x16)
(ME x8, EE x4)
1
1
1
NCSI_SEL1
LED_LAN_3_4
LED_LAN_5_6
BUZZER1
1
PWM_CFG1
SATA_SGPIO2
SATA_SGPIO1
11
FRNT_FAN4
1
SPEAKER1
USB_3_4
1
32
USB 3.1
T: USB_3
B: USB_4
16
17
20
21
22
23
24
25
1234578
6
18
19
26
31
38
41
42
43
M2_1
NUT110_1
NUT80_1
NUT60_1
NUT42_1
NUT30_1
CLRMOS1
37

E3C246D4M-4L / E3C242D4M-4L
10 11
English
No. Description
1 BMC SMBus Header (BMC_SMB_1)
2 ATX 12V Power Connector (ATX12V1)
3 Intelligent Platform Management Bus Header (IPMB_1)
4 ME Recovery Jumper (ME_RECOVERY1)
5 PWM Conguration Header (PWM_CFG1)
6 Rear Fan Connector (REAR_FAN1)
7PSU SMBus (PSU_SMB1)
8 ATX Power Connector (ATXPWR1)
9 2 x 288-pin DDR4 DIMM Slots (DDR4_A1, DDR4_B1, Blue)
10 2 x 288-pin DDR4 DIMM Slots (DDR4_A2, DDR4_B2, White)
11 CPU Fan Connector (CPU_FAN1)
12 Front Fan Connector (FRNT_FAN1)
13 Front Fan Connector (FRNT_FAN2)
14 Front Fan Connector (FRNT_FAN3)
15 SATA3 DOM Connector (SATA_0), Red
16 SATA3 Connector (SATA_1)
17 SATA SGPIO Connector (SATA_SGPIO1)
18 SATA SGPIO Connector (SATA_SGPIO2)
19 SATA DOM Power Jumper (SATAPWR1)
20 CPU PECI Mode Jumper (PECI1)
21 SATA DOM Power Header (SATA_PWR1)
22 Front Fan Connector (FRNT_FAN4)
23 SATA3 Connector (SATA_2)
24 SATA3 Connector (SATA_3)
25 SATA3 Connector (SATA_4)
26 SATA3 Connector (SATA_5)
27 Chassis Speaker Header (SPEAKER1)
28 System Panel Header (PANEL1)
29 Auxiliary Panel Header (AUX_PANEL1)
30 USB 2.0 Header (USB_1_2)
31 Flash Descriptor Security Override Jumper (SEC_OR1)
32 USB 2.0 Header (USB_3_4)
33 Vertical Type A USB 3.1 Gen1 Connector (USB31_7)

12 13
English
No. Description
34 USB 3.1 Gen1 Header (USB31_5_6)
35 TPM Header (TPM1)
36 PCIE Card Slot 2 (PCIE2) (ME x8, EE x4, from PCH)
37 Clear CMOS Pad (CLRMOS1)
38 M.2 Socket (M2_1) (Type 2230/2242/2260/2280/22110)
39 PCIE Card Slot 6 (PCIE6) (x16, from CPU)
40 Mezzaine Card Slot (MEZZ_1)
41 NCSI Mode Jumper (NCSI_SEL1)
42 LAN LED Connector (LED_LAN_3_4)
43 LAN LED Connector (LED_LAN_5_6)
For DIMM installation and conguration instructions, please see p.22 (Installation of Memory Modules (DIMM))
for more details.

E3C246D4M-4L / E3C242D4M-4L
12 13
English
1.5 Onboard LED Indicators
DDR3_B1 (64 bit, 240-pin module)
DDR3_A1 (64 bit, 240-pin module)
DDR3_B1 (64 bit, 240-pin module)
DDR3_A1 (64 bit, 240-pin module)
1
2
3
4
5
7
8
ATXPWR1
CPU_FAN1
FRNT_FAN1
DDR4_B1 (64 bit, 288-pin module)
DDR4_B2 (64 bit, 288-pin module)
DDR4_A1 (64 bit, 288-pin module)
DDR4_A2 (64 bit, 288-pin module)
1
11
REAR_FAN1
1
1
1
FRNT_FAN2
FRNT_FAN3
BAT1
Intel
C242
1
1
HDLED RESET
PLED PWRBTN
1
1
1
11
UID1
E3C242D4M-4L
BIOS
ROM
11
1
1
1
BUZZER1
1
11
FRNT_FAN4
1
1
6
NUT110_1
NUT80_1
NUT60_1
NUT42_1
NUT30_1

14 15
English
No. Item Status Description
1 SB_PWR1 Green STB PWR ready
2FAN_LED1 Amber CPU_FAN1 failed
3FRNT_FAN1_LED1 Amber Front_FAN1 failed
4FRNT_FAN2_LED2 Amber Front_FAN2 failed
5FRNT_FAN3_LED3 Amber Front_FAN3 failed
6FRNT_FAN4_LED4 Amber Front_FAN4 failed
7BMC_LED1 Green BMC heartbeat LED
8REAR _FAN1_LED1 Amber Rear_FAN1 failed