astoniga 40100063 User manual

IF YOU HAVE ANY PROBLEMS OR QUESTIONS CONCERNING THIS PRODUCT,
DO NOT RETURN IT TO YOUR RETAILER, CONTACT CUSTOMER SERVICE AT
1-888-424-3354
151106rev1
Read the instructions and precautions before use of this product
Please keep this instruction manual for future reference
IF YOU HAVE ANY PROBLEMS OR QUESTIONS CONCERNING THIS PRODUCT,
DO NOT RETURN IT TO YOUR RETAILER, CONTACT CONSUMER SUPPORT AT
1-888-424-3354
OR
IF YOU ARE A STORE MANAGER OR EMPLOYEE IN NEED OF ASSISTANCE CALL
1-888-851-5569
PLEASE HAVE YOUR STORE NUMBER READY
Limited Warranty
World Factory, Inc.®Products for Home Use
World Factory, Inc. (Seller) warrants to the original Buyer only, that each Astonica®Product will be
free from defects in material and workmanship for a period of one (1) year from date of purchase.
SELLER’S SOLE OBLIGATION AND BUYER’S EXCLUSIVE REMEDY UNDER THIS LIMITED
WARRANTY SHALL BE THE REPAIR OR REPLACEMENT OF PARTS, WITHOUT CHARGE, WHICH
ARE DEFECTIVE IN MATERIAL OR WORKMANSHIP. ANY PARTS AS DETERMINED BY THE
SELLER WHICH HAVE BEEN MISUSED; ABUSED OR DAMAGED EITHER DIRECTLY OR INDIRECTLY
FROM REPAIRS OR ALTERATIONS ATTEMPTED BY UNAUTHORIZED PERSONS; IMPROPER
MAINTENANCE, NEGLECT OR ACCIDENT ARE NOT COVERED BY THIS LIMITED WARRANTY. This
warranty does not apply to damage, heat-induced coloration changes, scratching or alteration due to
normal use or weathering. To make a claim under this Limited Warranty, you must return the complete
product with proof of purchase, transportation prepaid, to any World Factory, Inc. authorized service
center. Call 1-888-424-3354 for the location of the nearest authorized service center.
Additional Limitations
THIS LIMITED WARRANTY DOES NOT APPLY TO ACCESSORY OR CONSUMABLE ITEMS RELATED
TO THIS PRODUCT. ALL IMPLIED WARRANTIES SHALL BE LIMITED IN DURATION TO ONE (1)
YEAR FROM DATE OF PURCHASE. IN NO EVENT SHALL SELLER BE LIABLE FOR ANY
INCIDENTAL OR CONSEQUENTIAL DAMAGES, INCLUDING BUT NOT LIMITED TO LIABILITY FOR
LOSS OF PROFITS, ARISING FROM THE SALE OR USE OF THIS PRODUCT.
If any provision of this Limited Warranty is for any reason held to be invalid or unenforceable, such
provision shall not affect any other provision herein, this Limited Warranty shall be construed as if
such invalid and/or unenforceable provision had never been contained herein.
This Warranty contains the entire agreement between Seller and Buyer and supersedes any and all
prior agreements, arrangements, or understandings between the parties relating to product warranty.
®
Made in China
©2006 World Factory, Inc.
Distributed by:
World Factory, Inc.
Coppell, TX 75019
Model No: 40100063
Terra Outdoor Fireplace
Instruction Manual
Due to ongoing product development
the actual product or products may vary from
the illustrations or photos shown within this manual.
NOTE: This product is intended for residential, non-commercial use.
For Outdoor Use Only

PARTS LIST
PART # DESCRIPTION QUANTITY
IF YOU HAVE ANY PROBLEMS OR QUESTIONS CONCERNING THIS PRODUCT,
DO NOT RETURN IT TO YOUR RETAILER. CONTACT CUSTOMER SERVICE AT
1-888-424-3354
Carefully remove the contents from the package. If any parts are missing do not
attempt to use the product until they have been obtained and correctly installed.
NOTE: This product is intended for residential, non-commercial use.
Parts Detail
A Support Shelves 4
B Leg 4
C Mounting Brace 4
D Leg Support Ring 1
E Bolt M6 x 20 4
F Flat Washer 16
G Hex Nut 16
H Bolt M6 x 35 4
J Fireplace Cover 1
K Fireplace Bowl 1
L Threaded Studs 8
G
E
H
A
BC
D
F
K
J
1?
L

2
 WARNING: RISK OF FIRE OR PERSONAL INJURY. Improper operation, handling or
 maintenance of the Outdoor Fireplace could cause damage to property or serious injury.
 To prevent or reduce the risk of fire or personal injury adhere to the following instructions
 and preventive measures.
Practice Fire Safety At All Times
1. Use with adult supervision only. Keep out of the reach of children.
2. Do not leave unattended while burning or smoldering.
3. Always extinguish fire completely when not supervised, or before moving.
4. Do not place near flammable or combustible materials when burning.
5. This product is intended for outdoor use only.
6. Do not use in an enclosed or poorly ventilated area, burning fires produce carbon monoxide
 an odorless, colorless gas that can cause death when inhaled.
7. Keep away from overhangs, trees, gazebos, tents and other outdoor structures.
8. Do not use on balconies or wood decks.
9. Keep a fire extinguisher within reach at all times.
10.Never touch metal surfaces after a fire has been lit. Allow adequate time for unit to cool
 after fire is out, then wear insulated safety gloves to protect yourself.
 CAUTION
1.Do not use liquid fire starter, charcoal lighter fluid or any other combustible
 liquids to start the fire.
2.Use natural kindling or store bought solid fire starters.
3.Use small quantities of dry hardwood only or charcoal.
4.Read and follow all safety instructions specified by the manufacturer of the
 charcoal and/or fire starters you are using.
Figure 4
J
A
K
1.(SEE FIGURE 4) Place the fireplace bowl (K) inside support shelves (A).
2.Place the fireplace cover (J) on top of fireplace bowl.
5
GENERAL SAFETY INSTRUCTIONS

ASSEMBLY INSTRUCTIONS
Figure 1
G
A
F
A
 CAUTION: Do not over tighten
 fasteners.
Assembly the Support Shelf
1.(SEE FIGURE 1) Align threaded
 studs from one support shelf
 with mounting holes of second
 support shelf (A).
2.Insert threaded studs through
 support shelf as shown.
3.Loosely attach first two support
 shelves, using flat washers (F)
 and hex nuts (G).
4.Loosely attach the remaining support shelves to the first two in the same manner.
5.Once all support shelves arein place, tighten all fasteners.
Install Threaded Studs
1.(SEE FIGURE 2) Align threaded studs (L) with mounting holes under support shelves as shown.
 Install one threaded stud (L) into each mounting hole at backside of support shelf assembly.
Threaded
Studs
Mounting
Holes
Figure 2
LBackside of Support Shelves
Mounting
Holes
Install Legs
1.(SEE FIGURE 3) Align each leg (B)
 over threaded studs (L).
2.Secure each leg (B) to bottom of
 support self assembly using
 two flat washers (F) and two
 hex nuts (G) per leg.
Figure 3
Install Leg Support Ring
 CAUTION: Do not over tighten fasteners.
1.(SEE FIGURE 4) Place one hex bolt (E) through mounting tab of leg (B), then through one
 end of mounting brace (C). Loosely attach leg to mounting brace using one flat washer (F)
 and one hex nut (G).
2.Align leg support ring (D) with bottom of mounting brace (C) as shown.
3.Place one hex bolt (H) through mounting brace (C) then through the support ring mounting tab.
 Attach the mounting brace to the support ring tab, using one flat washer (F) and one hex nut (G).
 NOTE:The mounting brace (C) needs to be positioned between the bottom of the leg mounting
 tab and over the top of the leg support ring mounting tab.
4.Repeat steps 1 through 3 for remaining legs and mounting braces.
5.Once all mounting braces are in place tighten all fasteners.
Figure 4
EH
B
Leg Mounting
Tab
C
G
F
D
Support Ring
Mounting Tab
G
F
G
FG
F
G
F
B (4-Places)
D
4
3