Astro Pneumatic Tool 7897 User manual

Call 1.800.221.9705 for questions concerning performance of the product
or other inquiries.
Page 2
7897
372 Old USHighway 52 South
Mount Airy, NC 27030
BALL JOINT SERVICE TOOL
AND MASTER ADAPTER SET
7897-01
7897-02
7897-03
7897-04
7897-05
7897-06
7897-07
7897-08
7897-09
7897-10
7897-11
C-Frame
1-3/4" x 2" Receiving Tube
1-3/4" x 2-1/2" Receiving Tube
2-1/4" x 3"
Screw
Center Rod
Sleeve
Adapter
Adapter
Adapter
Adapter
1
1
1
1
1
1
1
1
1
1
1
7897-12
7897-13
7897-14
7897-15
7897-16
7897-17
7897-18
7897-19
7897-20
7897-21
Adapter
Adapter
Adapter
Adapter
Adapter
Adapter
Adapter
Adapter
Adapter
Adapter
1
1
1
1
1
1
1
1
1
1
Product: 7897 Manual
Dimension: 17”x 11”/page
Date: 2007/04/04
Color: Black
Page 1
7897
Important
When unpacking, check the parts diagram and part number
listing on page 2 to make sure all parts are included. If any
parts are missing or damaged, please call your distributor.
Unpacking
www.astrotools.com
Product Information
• Removes and replaces ball joints
• C frame press alone can be used to remove and replace universal joints
• Set includes all the receiver tubes and removing/installing adapters
needed to work on press-fit upper and lower ball joints on most GM,
Ford, and Dodge 2 and 4 wheel drive pickups, vans and
sport utility vehicles through 1997
• Also included is the live center forcing screw plug
• Blow molded case for easy storage and transport
•Astro Pneumatic Tool Co. warrants our products to the original user against
defective material or workmanship for a period of 1 year from the date of 1st use.
Astro reserves the right to determine whether the product failed because of defective
material, workmanship or other causes and to charge back for missing parts. Astro
Pneumatic Tool Co., at its discretion, will repair products covered under this warranty
free of charge. The original user is to return the product (with the exceptions listed
below) with the distributor’s name, address, adequate proof of date of purchase or a
copy of warranty card, and a short note explaining the problem. Failures caused
by accident, alteration, or misuse are not covered by this warranty.
•If one part of this product fails, please do not return the entire product.
Astro will replace free of charge component parts of this product that fail
within 1 year of first use by the original user. Items included in this category
include but are not limited to kits, hand tool kits and any other product where
there are multiple items or components that make up the unit. Please contact
the phone number below in order to obtain the replacement components
covered under warranty.
•Astro Pneumatic Tool Co. or its authorized service representatives must perform all
warranty repairs. Any repair to the product by unauthorized service representatives
voids this warranty. The rights under this warranty are limited to the original user
and may not be transferred to subsequent owners.
•This warranty is in lieu of all other warranties, expressed or implied, including
warranties of merchantability and fitness for a particular purpose. Some states do
not allow the exclusion of limitations of incidental or consequential damages so the
above limitations may not apply to you. All claims must be sent to:
Astro Pneumatic Tool Company
372 Old US Highway 52 South
Mt. Airy, NC 27030
1YEAR LIMITEDWARRANTY
PLEASE CALL 1-800-221-9705
FOR REPAIR AND RETURN INSTRUCTIONS
BALL JOINT SERVICE TOOL AND
MASTER ADAPTER SET
BALL JOINT SERVICE TOOL AND MASTER ADAPTER SET
7897-16 7897-21 7897-10 7897-15 7897-14 7897-20 7897-18 7897-11 7897-12 7897-19 7897-17 7897-07 7897-13 7897-06
Page 3
7897 BALL JOINT SERVICE TOOL AND
MASTER ADAPTER SET
61-7987
12-7987
01-7987
51-7987
41-7987
02-7987
81-7987
11-7987
21-7987
91-7987
71-7987
70-7987
31-7987
60-7987
Page 4
7897 BALL JOINT SERVICE TOOL AND
MASTER ADAPTER SET
7897-16 7897-21 7897-10 7897-15 7897-14 7897-20 7897-18 7897-11 7897-12 7897-19 7897-17 7897-07 7897-13 7897-06
7897-06
7897-16
7897-21
7897-13
7897-10
7897-07
7897-17
7897-15
7897-14
7897-19
7897-20
7897-12
7897-18
7897-11
Page 5
7897 BALL JOINT SERVICE TOOL AND
MASTER ADAPTER SET
Page 6
7897 BALL JOINT SERVICE TOOL AND
MASTER ADAPTER SET
Page 7
7897 BALL JOINT SERVICE TOOL AND
MASTER ADAPTER SET
outside of sheet 1
inside sheet of 1
outside of sheet 2
inside of sheet 2
All manuals and user guides at all-guides.com
all-guides.com

Call 1.800.221.9705 for questions concerning performance of the product
or other inquiries.
Page 2
7897
372 Old USHighway 52 South
Mount Airy, NC 27030
BALL JOINT SERVICE TOOL
AND MASTER ADAPTER SET
7897-01
7897-02
7897-03
7897-04
7897-05
7897-06
7897-07
7897-08
7897-09
7897-10
7897-11
C-Frame
1-3/4" x 2" Receiving Tube
1-3/4" x 2-1/2" Receiving Tube
2-1/4" x 3"
Screw
Center Rod
Sleeve
Adapter
Adapter
Adapter
Adapter
1
1
1
1
1
1
1
1
1
1
1
7897-12
7897-13
7897-14
7897-15
7897-16
7897-17
7897-18
7897-19
7897-20
7897-21
Adapter
Adapter
Adapter
Adapter
Adapter
Adapter
Adapter
Adapter
Adapter
Adapter
1
1
1
1
1
1
1
1
1
1
Product: 7897 Manual
Dimension: 17”x 11”/page
Date: 2007/04/04
Color: Black
Page 1
7897
Important
When unpacking, check the parts diagram and part number
listing on page 2 to make sure all parts are included. If any
parts are missing or damaged, please call your distributor.
Unpacking
www.astrotools.com
Product Information
• Removes and replaces ball joints
• C frame press alone can be used to remove and replace universal joints
• Set includes all the receiver tubes and removing/installing adapters
needed to work on press-fit upper and lower ball joints on most GM,
Ford, and Dodge 2 and 4 wheel drive pickups, vans and
sport utility vehicles through 1997
• Also included is the live center forcing screw plug
• Blow molded case for easy storage and transport
•Astro Pneumatic Tool Co. warrants our products to the original user against
defective material or workmanship for a period of 1 year from the date of 1st use.
Astro reserves the right to determine whether the product failed because of defective
material, workmanship or other causes and to charge back for missing parts. Astro
Pneumatic Tool Co., at its discretion, will repair products covered under this warranty
free of charge. The original user is to return the product (with the exceptions listed
below) with the distributor’s name, address, adequate proof of date of purchase or a
copy of warranty card, and a short note explaining the problem. Failures caused
by accident, alteration, or misuse are not covered by this warranty.
•If one part of this product fails, please do not return the entire product.
Astro will replace free of charge component parts of this product that fail
within 1 year of first use by the original user. Items included in this category
include but are not limited to kits, hand tool kits and any other product where
there are multiple items or components that make up the unit. Please contact
the phone number below in order to obtain the replacement components
covered under warranty.
•Astro Pneumatic Tool Co. or its authorized service representatives must perform all
warranty repairs. Any repair to the product by unauthorized service representatives
voids this warranty. The rights under this warranty are limited to the original user
and may not be transferred to subsequent owners.
•This warranty is in lieu of all other warranties, expressed or implied, including
warranties of merchantability and fitness for a particular purpose. Some states do
not allow the exclusion of limitations of incidental or consequential damages so the
above limitations may not apply to you. All claims must be sent to:
Astro Pneumatic Tool Company
372 Old US Highway 52 South
Mt. Airy, NC 27030
1YEAR LIMITEDWARRANTY
PLEASE CALL 1-800-221-9705
FOR REPAIR AND RETURN INSTRUCTIONS
BALL JOINT SERVICE TOOL AND
MASTER ADAPTER SET
BALL JOINT SERVICE TOOL AND MASTER ADAPTER SET
7897-16 7897-21 7897-10 7897-15 7897-14 7897-20 7897-18 7897-11 7897-12 7897-19 7897-17 7897-07 7897-13 7897-06
Page 3
7897 BALL JOINT SERVICE TOOL AND
MASTER ADAPTER SET
61-7987
12-7987
01-7987
51-7987
41-7987
02-7987
81-7987
11-7987
21-7987
91-7987
71-7987
70-7987
31-7987
60-7987
Page 4
7897 BALL JOINT SERVICE TOOL AND
MASTER ADAPTER SET
7897-16 7897-21 7897-10 7897-15 7897-14 7897-20 7897-18 7897-11 7897-12 7897-19 7897-17 7897-07 7897-13 7897-06
7897-06
7897-16
7897-21
7897-13
7897-10
7897-07
7897-17
7897-15
7897-14
7897-19
7897-20
7897-12
7897-18
7897-11
Page 5
7897 BALL JOINT SERVICE TOOL AND
MASTER ADAPTER SET
Page 6
7897 BALL JOINT SERVICE TOOL AND
MASTER ADAPTER SET
Page 7
7897 BALL JOINT SERVICE TOOL AND
MASTER ADAPTER SET
outside of sheet 1
inside sheet of 1
outside of sheet 2
inside of sheet 2
All manuals and user guides at all-guides.com

Call 1.800.221.9705 for questions concerning performance of the product
or other inquiries.
Page 2
7897
372 Old USHighway 52 South
Mount Airy, NC 27030
BALL JOINT SERVICE TOOL
AND MASTER ADAPTER SET
7897-01
7897-02
7897-03
7897-04
7897-05
7897-06
7897-07
7897-08
7897-09
7897-10
7897-11
C-Frame
1-3/4" x 2" Receiving Tube
1-3/4" x 2-1/2" Receiving Tube
2-1/4" x 3"
Screw
Center Rod
Sleeve
Adapter
Adapter
Adapter
Adapter
1
1
1
1
1
1
1
1
1
1
1
7897-12
7897-13
7897-14
7897-15
7897-16
7897-17
7897-18
7897-19
7897-20
7897-21
Adapter
Adapter
Adapter
Adapter
Adapter
Adapter
Adapter
Adapter
Adapter
Adapter
1
1
1
1
1
1
1
1
1
1
Product: 7897 Manual
Dimension: 17”x 11”/page
Date: 2007/04/04
Color: Black
Page 1
7897
Important
When unpacking, check the parts diagram and part number
listing on page 2 to make sure all parts are included. If any
parts are missing or damaged, please call your distributor.
Unpacking
www.astrotools.com
Product Information
• Removes and replaces ball joints
• C frame press alone can be used to remove and replace universal joints
• Set includes all the receiver tubes and removing/installing adapters
needed to work on press-fit upper and lower ball joints on most GM,
Ford, and Dodge 2 and 4 wheel drive pickups, vans and
sport utility vehicles through 1997
• Also included is the live center forcing screw plug
• Blow molded case for easy storage and transport
•Astro Pneumatic Tool Co. warrants our products to the original user against
defective material or workmanship for a period of 1 year from the date of 1st use.
Astro reserves the right to determine whether the product failed because of defective
material, workmanship or other causes and to charge back for missing parts. Astro
Pneumatic Tool Co., at its discretion, will repair products covered under this warranty
free of charge. The original user is to return the product (with the exceptions listed
below) with the distributor’s name, address, adequate proof of date of purchase or a
copy of warranty card, and a short note explaining the problem. Failures caused
by accident, alteration, or misuse are not covered by this warranty.
•If one part of this product fails, please do not return the entire product.
Astro will replace free of charge component parts of this product that fail
within 1 year of first use by the original user. Items included in this category
include but are not limited to kits, hand tool kits and any other product where
there are multiple items or components that make up the unit. Please contact
the phone number below in order to obtain the replacement components
covered under warranty.
•Astro Pneumatic Tool Co. or its authorized service representatives must perform all
warranty repairs. Any repair to the product by unauthorized service representatives
voids this warranty. The rights under this warranty are limited to the original user
and may not be transferred to subsequent owners.
•This warranty is in lieu of all other warranties, expressed or implied, including
warranties of merchantability and fitness for a particular purpose. Some states do
not allow the exclusion of limitations of incidental or consequential damages so the
above limitations may not apply to you. All claims must be sent to:
Astro Pneumatic Tool Company
372 Old US Highway 52 South
Mt. Airy, NC 27030
1YEAR LIMITEDWARRANTY
PLEASE CALL 1-800-221-9705
FOR REPAIR AND RETURN INSTRUCTIONS
BALL JOINT SERVICE TOOL AND
MASTER ADAPTER SET
BALL JOINT SERVICE TOOL AND MASTER ADAPTER SET
7897-16 7897-21 7897-10 7897-15 7897-14 7897-20 7897-18 7897-11 7897-12 7897-19 7897-17 7897-07 7897-13 7897-06
Page 3
7897 BALL JOINT SERVICE TOOL AND
MASTER ADAPTER SET
61-7987
12-7987
01-7987
51-7987
41-7987
02-7987
81-7987
11-7987
21-7987
91-7987
71-7987
70-7987
31-7987
60-7987
Page 4
7897 BALL JOINT SERVICE TOOL AND
MASTER ADAPTER SET
7897-16 7897-21 7897-10 7897-15 7897-14 7897-20 7897-18 7897-11 7897-12 7897-19 7897-17 7897-07 7897-13 7897-06
7897-06
7897-16
7897-21
7897-13
7897-10
7897-07
7897-17
7897-15
7897-14
7897-19
7897-20
7897-12
7897-18
7897-11
Page 5
7897 BALL JOINT SERVICE TOOL AND
MASTER ADAPTER SET
Page 6
7897 BALL JOINT SERVICE TOOL AND
MASTER ADAPTER SET
Page 7
7897 BALL JOINT SERVICE TOOL AND
MASTER ADAPTER SET
outside of sheet 1
inside sheet of 1
outside of sheet 2
inside of sheet 2
All manuals and user guides at all-guides.com

Call 1.800.221.9705 for questions concerning performance of the product
or other inquiries.
Page 2
7897
372 Old USHighway 52 South
Mount Airy, NC 27030
BALL JOINT SERVICE TOOL
AND MASTER ADAPTER SET
7897-01
7897-02
7897-03
7897-04
7897-05
7897-06
7897-07
7897-08
7897-09
7897-10
7897-11
C-Frame
1-3/4" x 2" Receiving Tube
1-3/4" x 2-1/2" Receiving Tube
2-1/4" x 3"
Screw
Center Rod
Sleeve
Adapter
Adapter
Adapter
Adapter
1
1
1
1
1
1
1
1
1
1
1
7897-12
7897-13
7897-14
7897-15
7897-16
7897-17
7897-18
7897-19
7897-20
7897-21
Adapter
Adapter
Adapter
Adapter
Adapter
Adapter
Adapter
Adapter
Adapter
Adapter
1
1
1
1
1
1
1
1
1
1
Product: 7897 Manual
Dimension: 17”x 11”/page
Date: 2007/04/04
Color: Black
Page 1
7897
Important
When unpacking, check the parts diagram and part number
listing on page 2 to make sure all parts are included. If any
parts are missing or damaged, please call your distributor.
Unpacking
www.astrotools.com
Product Information
• Removes and replaces ball joints
• C frame press alone can be used to remove and replace universal joints
• Set includes all the receiver tubes and removing/installing adapters
needed to work on press-fit upper and lower ball joints on most GM,
Ford, and Dodge 2 and 4 wheel drive pickups, vans and
sport utility vehicles through 1997
• Also included is the live center forcing screw plug
• Blow molded case for easy storage and transport
•Astro Pneumatic Tool Co. warrants our products to the original user against
defective material or workmanship for a period of 1 year from the date of 1st use.
Astro reserves the right to determine whether the product failed because of defective
material, workmanship or other causes and to charge back for missing parts. Astro
Pneumatic Tool Co., at its discretion, will repair products covered under this warranty
free of charge. The original user is to return the product (with the exceptions listed
below) with the distributor’s name, address, adequate proof of date of purchase or a
copy of warranty card, and a short note explaining the problem. Failures caused
by accident, alteration, or misuse are not covered by this warranty.
•If one part of this product fails, please do not return the entire product.
Astro will replace free of charge component parts of this product that fail
within 1 year of first use by the original user. Items included in this category
include but are not limited to kits, hand tool kits and any other product where
there are multiple items or components that make up the unit. Please contact
the phone number below in order to obtain the replacement components
covered under warranty.
•Astro Pneumatic Tool Co. or its authorized service representatives must perform all
warranty repairs. Any repair to the product by unauthorized service representatives
voids this warranty. The rights under this warranty are limited to the original user
and may not be transferred to subsequent owners.
•This warranty is in lieu of all other warranties, expressed or implied, including
warranties of merchantability and fitness for a particular purpose. Some states do
not allow the exclusion of limitations of incidental or consequential damages so the
above limitations may not apply to you. All claims must be sent to:
Astro Pneumatic Tool Company
372 Old US Highway 52 South
Mt. Airy, NC 27030
1YEAR LIMITEDWARRANTY
PLEASE CALL 1-800-221-9705
FOR REPAIR AND RETURN INSTRUCTIONS
BALL JOINT SERVICE TOOL AND
MASTER ADAPTER SET
BALL JOINT SERVICE TOOL AND MASTER ADAPTER SET
7897-16 7897-21 7897-10 7897-15 7897-14 7897-20 7897-18 7897-11 7897-12 7897-19 7897-17 7897-07 7897-13 7897-06
Page 3
7897 BALL JOINT SERVICE TOOL AND
MASTER ADAPTER SET
61-7987
12-7987
01-7987
51-7987
41-7987
02-7987
81-7987
11-7987
21-7987
91-7987
71-7987
70-7987
31-7987
60-7987
Page 4
7897 BALL JOINT SERVICE TOOL AND
MASTER ADAPTER SET
7897-16 7897-21 7897-10 7897-15 7897-14 7897-20 7897-18 7897-11 7897-12 7897-19 7897-17 7897-07 7897-13 7897-06
7897-06
7897-16
7897-21
7897-13
7897-10
7897-07
7897-17
7897-15
7897-14
7897-19
7897-20
7897-12
7897-18
7897-11
Page 5
7897 BALL JOINT SERVICE TOOL AND
MASTER ADAPTER SET
Page 6
7897 BALL JOINT SERVICE TOOL AND
MASTER ADAPTER SET
Page 7
7897 BALL JOINT SERVICE TOOL AND
MASTER ADAPTER SET
outside of sheet 1
inside sheet of 1
outside of sheet 2
inside of sheet 2
All manuals and user guides at all-guides.com

Call 1.800.221.9705 for questions concerning performance of the product
or other inquiries.
Page 2
7897
372 Old USHighway 52 South
Mount Airy, NC 27030
BALL JOINT SERVICE TOOL
AND MASTER ADAPTER SET
7897-01
7897-02
7897-03
7897-04
7897-05
7897-06
7897-07
7897-08
7897-09
7897-10
7897-11
C-Frame
1-3/4" x 2" Receiving Tube
1-3/4" x 2-1/2" Receiving Tube
2-1/4" x 3"
Screw
Center Rod
Sleeve
Adapter
Adapter
Adapter
Adapter
1
1
1
1
1
1
1
1
1
1
1
7897-12
7897-13
7897-14
7897-15
7897-16
7897-17
7897-18
7897-19
7897-20
7897-21
Adapter
Adapter
Adapter
Adapter
Adapter
Adapter
Adapter
Adapter
Adapter
Adapter
1
1
1
1
1
1
1
1
1
1
Product: 7897 Manual
Dimension: 17”x 11”/page
Date: 2007/04/04
Color: Black
Page 1
7897
Important
When unpacking, check the parts diagram and part number
listing on page 2 to make sure all parts are included. If any
parts are missing or damaged, please call your distributor.
Unpacking
www.astrotools.com
Product Information
• Removes and replaces ball joints
• C frame press alone can be used to remove and replace universal joints
• Set includes all the receiver tubes and removing/installing adapters
needed to work on press-fit upper and lower ball joints on most GM,
Ford, and Dodge 2 and 4 wheel drive pickups, vans and
sport utility vehicles through 1997
• Also included is the live center forcing screw plug
• Blow molded case for easy storage and transport
•Astro Pneumatic Tool Co. warrants our products to the original user against
defective material or workmanship for a period of 1 year from the date of 1st use.
Astro reserves the right to determine whether the product failed because of defective
material, workmanship or other causes and to charge back for missing parts. Astro
Pneumatic Tool Co., at its discretion, will repair products covered under this warranty
free of charge. The original user is to return the product (with the exceptions listed
below) with the distributor’s name, address, adequate proof of date of purchase or a
copy of warranty card, and a short note explaining the problem. Failures caused
by accident, alteration, or misuse are not covered by this warranty.
•If one part of this product fails, please do not return the entire product.
Astro will replace free of charge component parts of this product that fail
within 1 year of first use by the original user. Items included in this category
include but are not limited to kits, hand tool kits and any other product where
there are multiple items or components that make up the unit. Please contact
the phone number below in order to obtain the replacement components
covered under warranty.
•Astro Pneumatic Tool Co. or its authorized service representatives must perform all
warranty repairs. Any repair to the product by unauthorized service representatives
voids this warranty. The rights under this warranty are limited to the original user
and may not be transferred to subsequent owners.
•This warranty is in lieu of all other warranties, expressed or implied, including
warranties of merchantability and fitness for a particular purpose. Some states do
not allow the exclusion of limitations of incidental or consequential damages so the
above limitations may not apply to you. All claims must be sent to:
Astro Pneumatic Tool Company
372 Old US Highway 52 South
Mt. Airy, NC 27030
1YEAR LIMITEDWARRANTY
PLEASE CALL 1-800-221-9705
FOR REPAIR AND RETURN INSTRUCTIONS
BALL JOINT SERVICE TOOL AND
MASTER ADAPTER SET
BALL JOINT SERVICE TOOL AND MASTER ADAPTER SET
7897-16 7897-21 7897-10 7897-15 7897-14 7897-20 7897-18 7897-11 7897-12 7897-19 7897-17 7897-07 7897-13 7897-06
Page 3
7897 BALL JOINT SERVICE TOOL AND
MASTER ADAPTER SET
61-7987
12-7987
01-7987
51-7987
41-7987
02-7987
81-7987
11-7987
21-7987
91-7987
71-7987
70-7987
31-7987
60-7987
Page 4
7897 BALL JOINT SERVICE TOOL AND
MASTER ADAPTER SET
7897-16 7897-21 7897-10 7897-15 7897-14 7897-20 7897-18 7897-11 7897-12 7897-19 7897-17 7897-07 7897-13 7897-06
7897-06
7897-16
7897-21
7897-13
7897-10
7897-07
7897-17
7897-15
7897-14
7897-19
7897-20
7897-12
7897-18
7897-11
Page 5
7897 BALL JOINT SERVICE TOOL AND
MASTER ADAPTER SET
Page 6
7897 BALL JOINT SERVICE TOOL AND
MASTER ADAPTER SET
Page 7
7897 BALL JOINT SERVICE TOOL AND
MASTER ADAPTER SET
outside of sheet 1
inside sheet of 1
outside of sheet 2
inside of sheet 2
All manuals and user guides at all-guides.com