Asus P1-PH1 User manual

Pundit P1-PH1
Barebone System
Quick Installation Guide
E2347E2347
E2347E2347
E2347

22
22
2Quick installation guideQuick installation guide
Quick installation guideQuick installation guide
Quick installation guide
Front panel features
Rear panel features
CloseClose
CloseClose
Close OpenOpen
OpenOpen
Open
PressPress
PressPress
Press
to opento open
to opento open
to open
the frontthe front
the frontthe front
the front panelpanel
panelpanel
panel
covercover
covercover
cover
Optical driveOptical drive
Optical driveOptical drive
Optical drive
eject buttoneject button
eject buttoneject button
eject button
Optical driveOptical drive
Optical driveOptical drive
Optical drive
bay coverbay cover
bay coverbay cover
bay cover
HDD LEDHDD LED
HDD LEDHDD LED
HDD LED
Power buttonPower button
Power buttonPower button
Power button
Power LEDPower LED
Power LEDPower LED
Power LED
Parallel portParallel port
Parallel portParallel port
Parallel port
Cover screwCover screw
Cover screwCover screw
Cover screw
PS/2 mouse portPS/2 mouse port
PS/2 mouse portPS/2 mouse port
PS/2 mouse port
PS/2 keyboard portPS/2 keyboard port
PS/2 keyboard portPS/2 keyboard port
PS/2 keyboard port
Voltage selector*Voltage selector*
Voltage selector*Voltage selector*
Voltage selector*
Power connectorPower connector
Power connectorPower connector
Power connector
VGA portVGA port
VGA portVGA port
VGA port
Serial portSerial port
Serial portSerial port
Serial port
USB 2.0 portsUSB 2.0 ports
USB 2.0 portsUSB 2.0 ports
USB 2.0 ports
Line In portLine In port
Line In portLine In port
Line In port
Line Out portLine Out port
Line Out portLine Out port
Line Out port
Microphone portMicrophone port
Microphone portMicrophone port
Microphone port
PCI slot metal bracketsPCI slot metal brackets
PCI slot metal bracketsPCI slot metal brackets
PCI slot metal brackets
Power supply air ventsPower supply air vents
Power supply air ventsPower supply air vents
Power supply air vents
Cover screwCover screw
Cover screwCover screw
Cover screw
TV Out portTV Out port
TV Out portTV Out port
TV Out port
S-Video Out portS-Video Out port
S-Video Out portS-Video Out port
S-Video Out port
LAN (RJ-45) portLAN (RJ-45) port
LAN (RJ-45) portLAN (RJ-45) port
LAN (RJ-45) port
DVI Out portDVI Out port
DVI Out portDVI Out port
DVI Out port
* The system’s power supply unit has a
115 V/230 V voltage selector switch located
near the power connector. Use this switch to
select the correct system input voltage
according to the voltage supply in your area.
4-pin IEEE 1394 port4-pin IEEE 1394 port
4-pin IEEE 1394 port4-pin IEEE 1394 port
4-pin IEEE 1394 port
Headphone portHeadphone port
Headphone portHeadphone port
Headphone port
Front panel coverFront panel cover
Front panel coverFront panel cover
Front panel cover
USB 2.0 portsUSB 2.0 ports
USB 2.0 portsUSB 2.0 ports
USB 2.0 ports
6-pin IEEE 1394 port6-pin IEEE 1394 port
6-pin IEEE 1394 port6-pin IEEE 1394 port
6-pin IEEE 1394 port
S/PDIF In portS/PDIF In port
S/PDIF In portS/PDIF In port
S/PDIF In port
S/PDIF Out portS/PDIF Out port
S/PDIF Out portS/PDIF Out port
S/PDIF Out port
Microphone portMicrophone port
Microphone portMicrophone port
Microphone port
CompactFlashCompactFlash
CompactFlashCompactFlash
CompactFlash
®
card slotcard slot
card slotcard slot
card slot
Reset buttonReset button
Reset buttonReset button
Reset button
3-in-1 card reader3-in-1 card reader
3-in-1 card reader3-in-1 card reader
3-in-1 card reader*
* Memory Stick
®
/Pro™, SecureDigital™,
MultiMediaCard

33
33
3
Quick installation guideQuick installation guide
Quick installation guideQuick installation guide
Quick installation guide
Internal components
1. 5.25-inch optical drive and
3.5 inch hard disk drive cage
2. Front panel cover
3. Power supply unit
4. PCI card riser bracket
(connected to the
motherboard PCI slot)
5. ASUS motherboard
6. DIMM sockets
7. LGA775 socket
(under the CPU
fan and heatsink assembly)
8. CPU fan and heatsink assembly
11
11
1
22
22
2
33
33
3
44
44
455
55
5
66
66
6
88
88
8
Removing the cover
1. Remove the cover screws. Keep the screws for later use.
2. Pull the cover slightly toward the rear panel.
3. Lift the cover, then set aside.
77
77
7
33
33
3
22
22
2
11
11
1

44
44
4Quick installation guideQuick installation guide
Quick installation guideQuick installation guide
Quick installation guide
Removing the CPU fan and heatsink
Removing the front panel cover
1. Lift the front panel cover
hooks outward.
2. Carefully remove the front
panel cover, then set it aside.
11
11
122
22
2
1. Lay the system on its side,
then locate and remove three
storage drive assembly screws.
Removing the storage drive assembly
2. Lift the storage drive
assembly, then set aside.
3. Lift the CPU fan and heatsink
assembly, then set aside.
1. Disconnect the CPU fan cable.
2. Loosen the CPU fan and
heatsink assembly screws.

55
55
5
Quick installation guideQuick installation guide
Quick installation guideQuick installation guide
Quick installation guide
1. Unlock the load lever, then lift
to a 90º-100º angle.
2. Lift the load plate, then
remove the PnP cap.
Installing the CPU
Load leverLoad lever
Load leverLoad lever
Load lever
Retention tabRetention tab
Retention tabRetention tab
Retention tab
3. Install the CPU. The CPU fits in
only one orientation.
4. Close the load plate, then lock
the load lever.
5. Reinstall the CPU fan and heatsink assembly, then reconnect the CPU
fan cable to the CPU fan connector on the motherboard. Refer to the
instructions in the previous section for details.
Installing a DIMM
1. Locate the DIMM sockets in the
motherboard.
2. Unlock a DIMM socket by
pressing the retaining clips
outward.
3. Align a DIMM on the socket such
that the notch on the DIMM
matches the break on the
socket.
UnlockedUnlocked
UnlockedUnlocked
Unlocked
retaining clipretaining clip
retaining clipretaining clip
retaining clip
DDR DIMM notchDDR DIMM notch
DDR DIMM notchDDR DIMM notch
DDR DIMM notch

66
66
6Quick installation guideQuick installation guide
Quick installation guideQuick installation guide
Quick installation guide
3. Insert the card connector to
the slot, then press the card
firmly until it fits in place.
Secure the card with a screw.
4. Reinstall the PCI riser card
assembly. Make sure that the
riser card connector sits properly
on the motherboard PCI slot.
Installing optical and storage drives
1. Turn the storage drive assembly upside down with the 3.5-inch bay on
top of the 5.25-inch bay.
2. Insert the optical drive upside down to the 5.25-inch bay, then secure
it with two screws on both sides.
3. Turn the storage drive assembly, insert the hard disk drive upside down to
the 3.5-inch bay, then secure it with two screws on both sides.
1. Lift the PCI riser card
assembly to remove.
2. Remove the metal cover
opposite the slot that you
intend to use.
Installing an expansion card
22
22
233
33
3

77
77
7
Quick installation guideQuick installation guide
Quick installation guideQuick installation guide
Quick installation guide
Reinstalling the storage drive assembly
Before reinstalling the storage drive assembly, connect the IDE and power
plugs to the IDE and power connectors at the back of the drives.
1. Connect the black plug of the IDE cable to the optical drive, then the
gray plug to the hard disk drive.
2. Connect the 4-pin power plugs to the power connectors at the back
of the drives.
3. Install the storage drive assembly to the chassis.
4. Secure the storage drive assembly with three screws.
33
33
344
44
4
1. Match the foot stand hooks to
the holes on the chassis.
Installing the foot stand
2. Pull the foot stand to the
direction of the arrow until the
lock clicks in place.
To remove the foot stand, lift the lock, then slightly push the foot stand to
the direction of the rear panel until it disengages from the chassis.

88
88
8Quick installation guideQuick installation guide
Quick installation guideQuick installation guide
Quick installation guide
Reinstalling the front panel cover
1. Insert the front panel cover
tabs to the holes at the right
side of the chassis, then close.
2. Insert the front panel cover
hooks to the chassis tabs until
the front panel cover fits in
place.
11
11
122
22
2
Reinstalling the cover
1. Install the cover to the chassis. Make sure the cover tabs fit the chassis rails.
2. Push the cover toward the front panel until it fits in place.
3. Secure the cover with two screws.
11
11
122
22
233
33
3