Asus Vintage pe1 User manual

Vintage-PE1

Barebone System

iiii

No part of this manual, including the products and software described in it, may be reproduced,

transmitted, transcribed, stored in a retrieval system, or translated into any language in any form

or by any means, except documentation kept by the purchaser for backup purposes, without the

express written permission of ASUSTeK COMPUTER INC. (“ASUS”).

Product warranty or service will not be extended if: (1) the product is repaired, modified or

altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the

serial number of the product is defaced or missing.

ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR

IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF

MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS

DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL,

INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS

OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF ASUS

HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR

ERROR IN THIS MANUAL OR PRODUCT.

SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR

INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE, AND

SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO RESPONSIBILITY

OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL,

INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.

Products and corporate names appearing in this manual may or may not be registered

trademarks or copyrights of their respective companies, and are used only for identification or

explanation and to the owners’ benefit, without intent to infringe.

E2012E2012

E2012

First EditionFirst Edition

First Edition

April 2005April 2005

April 2005

iiiiii

iii

Table of contents

Notices ............................................................................................... vii

Safety information ............................................................................. vii

About this guide ............................................................................... viii

System package contents ................................................................... x

Chapter 1: System IntroductionChapter 1: System Introduction

Chapter 1: System Introduction

1.1 Welcome! .............................................................................. 1-2

1.2 Front panel ........................................................................... 1-2

1.3 Rear panel ............................................................................. 1-4

Voltage selector ................................................................... 1-6

1.4 Internal components ............................................................ 1-7

Chapter 2:Chapter 2:

Chapter 2: Basic InstallationBasic Installation

Basic InstallationBasic Installation

Basic Installation

2.1 Preparation ........................................................................... 2-2

2.2 Before you proceed .............................................................. 2-2

2.3 Removing the side plate and front cover ............................. 2-3

2.4 Central Processing Unit (CPU) .............................................. 2-5

2.4.1 Installling the CPU ................................................... 2-5

2.4.2 Installling the CPU heatsink and fan ....................... 2-8

2.4.3 Uninstalling the CPU heatsink and fan .................. 2-10

2.5 Installing a DIMM ................................................................. 2-12

2.5.1 Memory configurations ......................................... 2-12

2.5.2 Installing a DIMM ................................................... 2-14

2.5.3 Removing a DIMM ................................................. 2-14

2.6 Expansion slots ................................................................... 2-15

2.6.1 Installing an expansion card .................................. 2-15

2.6.2 Configuring an expansion card.............................. 2-15

2.6.3 PCI slots ................................................................ 2-17

2.6.4 AGP slot ................................................................ 2-17

2.7 Installing an optical drive .................................................... 2-18

2.8 Installing a hard disk drive .................................................. 2-20

2.9 Installing a floppy disk drive ............................................... 2-22

2.10 Re-connecting cables ......................................................... 2-23

LED cables .......................................................................... 2-23

2.11 Replacing the side plate and front cover ........................... 2-24

2.12 Connecting external devices .............................................. 2-26

iviv

Table of contents

Chapter 3:Chapter 3:

Chapter 3: Starting upStarting up

Starting upStarting up

Starting up

3.1 Installing an operating system ............................................. 3-2

3.2 Powering up .......................................................................... 3-2

3.3 Support CD information ........................................................ 3-2

3.3.1 Running the support CD ......................................... 3-3

3.3.2 Utilities menu .......................................................... 3-4

3.2.3 ASUS Contact information ...................................... 3-5

Chapter 4:Chapter 4:

Chapter 4: Motherboard InfoMotherboard Info

Motherboard InfoMotherboard Info

Motherboard Info

4.1 Introduction .......................................................................... 4-2

4.2 Motherboard layout .............................................................. 4-2

4.3 Jumpers ................................................................................ 4-3

4.4 Connectors ........................................................................... 4-5

Chapter 5:Chapter 5:

Chapter 5: BIOS InformationBIOS Information

BIOS InformationBIOS Information

BIOS Information

5.1 Managing and updating your BIOS ........................................ 5-2

5.1.1 Creating a bootable floppy disk .............................. 5-2

5.1.2 ASUS EZ Flash utility .............................................. 5-3

5.1.3 AFUDOS utility ........................................................ 5-4

5.1.4 ASUS CrashFree BIOS 2 utility ................................ 5-6

5.1.5 ASUS Update utility ................................................ 5-8

5.2 BIOS setup program ........................................................... 5-11

5.2.1 BIOS menu screen ................................................. 5-12

5.2.2 Menu bar ............................................................... 5-12

5.2.3 Navigation keys .................................................... 5-12

5.2.4 Menu items ........................................................... 5-13

5.2.5 Sub-menu items ................................................... 5-13

5.2.6 Configuration fields .............................................. 5-13

5.2.7 Pop-up window ..................................................... 5-13

5.2.8 Scroll bar .............................................................. 5-13

5.2.9 General help .......................................................... 5-13

5.3 Main menu .......................................................................... 5-14

5.3.1 System Time ......................................................... 5-14

5.3.2 System Date ......................................................... 5-14

5.3.3 Legacy Diskette A ................................................ 5-14

Table of contents

5.3.4 Primary and Secondary IDE Master/Slave ............. 5-15

5.3.5 OnChip SATA Controller ....................................... 5-16

5.3.6 System Information .............................................. 5-16

5.4 Advanced menu .................................................................. 5-17

5.4.1 JumperFree Configuration .................................... 5-17

5.4.2 CPU Configuration ................................................. 5-18

5.4.3 Chipset ................................................................. 5-19

5.4.4 Onboard Devices Configuration ............................ 5-20

5.4.5 PCI PnP ................................................................. 5-22

5.4.6 USB Configuration ................................................. 5-23

5.4.7 Instant Music Configuration .................................. 5-24

5.5 Power menu ........................................................................ 5-25

5.5.1 Suspend Mode ...................................................... 5-25

5.5.2 ACPI 2.0 Support .................................................. 5-25

5.5.3 ACPI APIC Support ................................................ 5-25

5.5.5 APM Configuration ................................................ 5-26

5.5.6 Hardware Monitor ................................................. 5-27

5.6 Boot menu .......................................................................... 5-29

5.6.1 Boot Device Priority .............................................. 5-29

5.6.2 Hard Disk Drives ................................................... 5-29

5.6.3 Boot Settings Configuration ................................. 5-30

5.6.4 Security ................................................................ 5-31

5.7 Exit menu ........................................................................... 5-33

vivi

Notices

Federal Communications Commission StatementFederal Communications Commission Statement

Federal Communications Commission Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to

the following two conditions:

•

This device may not cause harmful interference, and

•

This device must accept any interference received including interference

that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with

manufacturer’s instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

•

Reorient or relocate the receiving antenna.

•

Increase the separation between the equipment and receiver.

•

Connect the equipment to an outlet on a circuit different from that to

which the receiver is connected.

•

Consult the dealer or an experienced radio/TV technician for help.

Canadian Department of Communications StatementCanadian Department of Communications Statement

Canadian Department of Communications Statement

This digital apparatus does not exceed the Class B limits for radio noise

emissions from digital apparatus set out in the Radio Interference

Regulations of the Canadian Department of Communications.

This class B digital apparatus complies with Canadian ICES-003.This class B digital apparatus complies with Canadian ICES-003.

This class B digital apparatus complies with Canadian ICES-003.

WARNING!WARNING!

WARNING! The use of shielded cables for connection of the monitor to

the graphics card is required to assure compliance with FCC regulations.

Changes or modifications to this unit not expressly approved by the

party responsible for compliance could void the user’s authority to

operate this equipment.

viivii

vii

Safety information

Electrical safetyElectrical safety

Electrical safety

•

To prevent electrical shock hazard, disconnect the power cable from the

electrical outlet before relocating the system.

•

When adding or removing devices to or from the system, ensure that the

power cables for the devices are unplugged before the signal cables are

connected.

•

If the power supply is broken, do not try to fix it by yourself. Contact a

qualified service technician or your retailer.

Operation safetyOperation safety

Operation safety

•

Before installing devices into the system, carefully read all the

documentation that came with the package.

•

Before using the product, make sure all cables are correctly connected

and the power cables are not damaged. If you detect any damage,

contact your dealer immediately.

•

To avoid short circuits, keep paper clips, screws, and staples away from

connectors, slots, sockets and circuitry.

•

Avoid dust, humidity, and temperature extremes. Do not place the

product in any area where it may become wet. Place the product on a

stable surface.

•

If you encounter technical problems with the product, contact a qualified

service technician or your retailer.

Lithium-Ion Battery WarningLithium-Ion Battery Warning

Lithium-Ion Battery Warning

CAUTIONCAUTION

CAUTION: Danger of explosion if battery is incorrectly replaced.

Replace only with the same or equivalent type recommended by the

manufacturer. Dispose of used batteries according to the

manufacturerís instructions.

VORSICHTVORSICHT

VORSICHT: Explosionsgetahr bei unsachgemäßen Austausch der

Batterie. Ersatz nur durch denselben oder einem vom Hersteller

empfohlenem ähnljchen Typ. Entsorgung gebrauchter Batterien nach

Angaben des Herstellers.

LASER PRODUCT WARNINGLASER PRODUCT WARNING

LASER PRODUCT WARNING

CLASS 1 LASER PRODUCTCLASS 1 LASER PRODUCT

CLASS 1 LASER PRODUCT

viiiviii

viii

About this guide

AudienceAudience

Audience

This guide provides general information and installation instructions about

the ASUS Vintage-PE1 barebone system. This guide is intended for

experienced users and integrators with hardware knowledge of personal

computers.

How this guide is organizedHow this guide is organized

How this guide is organized

This guide contains the following parts:

1.1.

1. Chapter 1: System introductionChapter 1: System introduction

Chapter 1: System introductionChapter 1: System introduction

Chapter 1: System introduction

This chapter gives a general description of the ASUS Vintage-PE1. The

chapter lists the system features, including introduction on the front

and rear panel, and internal components.

2.2.

2. Chapter 2: Basic installationChapter 2: Basic installation

Chapter 2: Basic installationChapter 2: Basic installation

Chapter 2: Basic installation

This chapter provides step-by-step instructions on how to install

components in the system.

3.3.

3. Chapter 3: Starting upChapter 3: Starting up

Chapter 3: Starting upChapter 3: Starting up

Chapter 3: Starting up

This chapter helps you power up the system and install drivers and

utilities from the support CD.

4.4.

4. Chapter 4: Motherboard informationChapter 4: Motherboard information

Chapter 4: Motherboard informationChapter 4: Motherboard information

Chapter 4: Motherboard information

This chapter gives information about the motherboard that comes

with the system. This chapter includes the motherboard layout,

jumper settings, and connector locations.

5.5.

5. Chapter 5: BIOS informationChapter 5: BIOS information

Chapter 5: BIOS informationChapter 5: BIOS information

Chapter 5: BIOS information

This chapter tells how to change system settings through the BIOS

Setup menus and describes the BIOS parameters.

ixix

Conventions used in this guideConventions used in this guide

Conventions used in this guide

WARNING:WARNING:

WARNING: Information to prevent injury to yourself when

trying to complete a task.

CAUTION:CAUTION:

CAUTION: Information to prevent damage to the components

when trying to complete a task.

IMPORTANT:IMPORTANT:

IMPORTANT: Instructions that you MUST follow to complete a

task.

NOTE:NOTE:

NOTE: Tips and additional information to aid in completing a

task.

Where to find more informationWhere to find more information

Where to find more information

Refer to the following sources for additional information and for product

and software updates.

1.1.

1. ASUS WebsitesASUS Websites

ASUS WebsitesASUS Websites

ASUS Websites

The ASUS websites worldwide provide updated information on ASUS

hardware and software products. Refer to the ASUS contact

information.

2.2.

2. Optional DocumentationOptional Documentation

Optional DocumentationOptional Documentation

Optional Documentation

Your product package may include optional documentation, such as

warranty flyers, that may have been added by your dealer. These

documents are not part of the standard package.

System package contents

Check your Vintage-PE1 system package for the following items.

If any of the items is damaged or missing, contact your retailer

immediately.

Item descriptionItem description

Item description

1.1.

1. ASUS Vintage-PE1 barebone systemASUS Vintage-PE1 barebone system

ASUS Vintage-PE1 barebone systemASUS Vintage-PE1 barebone system

ASUS Vintage-PE1 barebone system with

• ASUS motherboard

• 300 W power supply unit w/ PFC

• ASUS chassis

2.2.

2. CableCable

CableCable

Cable

• AC power cable

3.3.

3. Support CDSupport CD

Support CDSupport CD

Support CD

4.4.

4. User guideUser guide

User guideUser guide

User guide

ASUS Vintage-PE1ASUS Vintage-PE1

ASUS Vintage-PE1

Chapter 1

System introduction

This chapter gives a general

description of the ASUS

Vintage-PE1. The chapter lists the

system features including

introduction on the front and rear

panel, and internal components.

1-21-2

1-2 Chapter 1: System introductionChapter 1: System introduction

Chapter 1: System introductionChapter 1: System introduction

Chapter 1: System introduction

1.1 Welcome!

Thank you for choosing the ASUS Vintage-PE1!

The ASUS Vintage-PE1 is an all-in-one barebone system with a versatile

home entertainment feature.

The system comes in a stylish mini-tower casing and powered by the ASUS

motherboard that supports the Intel

Pentium

4 processor in the 775-land

package with 800 MHz FSB and up to 2 GB system memory.

With audio capabilities and extensive connectivity, the Vintage-PE1 is

designed to deliver cutting edge technology for your computing and

multimedia needs.

1.2 Front panel

The front panel includes the optical drive(s), floppy disk drive slot, power

button, and several I/O ports are located at the front panel.

678

1-31-3

1-3

ASUS Vintage-PE1ASUS Vintage-PE1

ASUS Vintage-PE1

1.1.

1. Two empty 5.25-inch baysTwo empty 5.25-inch bays

Two empty 5.25-inch baysTwo empty 5.25-inch bays

Two empty 5.25-inch bays. These bays are for IDE optical drives.

2.2.

2. Hard disk drive bayHard disk drive bay

Hard disk drive bayHard disk drive bay

Hard disk drive bay. This door covers a hard disk drive.

3.3.

3. Floppy drive doorFloppy drive door

Floppy drive doorFloppy drive door

Floppy drive door. This drive is for 1.44MB, 3.5-inch floppy disk.

4.4.

4. Reset buttonReset button

Reset buttonReset button

Reset button. Press this button to reboot the system without

turning off the power.

5.5.

5. Power buttonPower button

Power buttonPower button

Power button. Press this button to turn the system on.

6.6.

6. Headphone portHeadphone port

Headphone portHeadphone port

Headphone port. This Line In (green) port connects a headphone

with a stereo mini-plug.

7.7.

7. Microphone portMicrophone port

Microphone portMicrophone port

Microphone port. This Mic (pink) port connects a microphone.

8.8.

8. USB 2.0 portsUSB 2.0 ports

USB 2.0 portsUSB 2.0 ports

USB 2.0 ports. These Universal Serial Bus 2.0 (USB 2.0) ports are

available for connecting USB 2.0 devices such as a mouse, printer,

scanner, camera, PDA, and others.

9.9.

9. IEEE1394 portIEEE1394 port

IEEE1394 portIEEE1394 port

IEEE1394 port. This 6-pin IEEE 1394 port provides high-speed

connectivity for audio/video devices, storage peripherals, PCs, or

portable devices.

1-41-4

1-4 Chapter 1: System introductionChapter 1: System introduction

Chapter 1: System introductionChapter 1: System introduction

Chapter 1: System introduction

1.3 Rear panel

The system rear panel includes the power connector and several I/O ports

that allow convenient connection of devices.

1.1.

1. PS/2 keyboard portPS/2 keyboard port

PS/2 keyboard portPS/2 keyboard port

PS/2 keyboard port. This purple 6-pin connector is for a PS/2

keyboard.

2.2.

2. PS/2 mouse portPS/2 mouse port

PS/2 mouse portPS/2 mouse port

PS/2 mouse port. This green 6-pin connector is for a PS/2 mouse.

3.3.

3. Serial portSerial port

Serial portSerial port

Serial port . This port connects a mouse, modem, or other devices

that conforms with serial specification.

4.4.

4. Parallel port.Parallel port.

Parallel port.Parallel port.

Parallel port. This 25-pin port connects a printer, scanner, or other

devices.

5.5.

5. VGA port.VGA port.

VGA port.VGA port.

VGA port. This port connects a VGA monitor.

6.6.

6. USB 2.0 ports 1, 2, 3 and 4.USB 2.0 ports 1, 2, 3 and 4.

USB 2.0 ports 1, 2, 3 and 4.USB 2.0 ports 1, 2, 3 and 4.

USB 2.0 ports 1, 2, 3 and 4. These 4-pin Universal Serial Bus

(USB) ports are available for connecting USB 2.0 devices.

7.7.

7. Microphone port (pink).Microphone port (pink).

Microphone port (pink).Microphone port (pink).

Microphone port (pink). This port connects a microphone.

8.8.

8. Line Out port (lime).Line Out port (lime).

Line Out port (lime).Line Out port (lime).

Line Out port (lime). This port connects a headphone or a

speaker. In 4-channel, 6-channel, and 8-channel configuration, the

function of this port becomes Front Speaker Out.

9.9.

9. Line In port (light blue).Line In port (light blue).

Line In port (light blue).Line In port (light blue).

Line In port (light blue). This port connects the tape, CD, DVD

player, or other audio sources.

1-51-5

1-5

ASUS Vintage-PE1ASUS Vintage-PE1

ASUS Vintage-PE1

10.10.

10. Power connector.Power connector.

Power connector.Power connector.

Power connector. This connector is for the power cable and plug.

11.11.

11. Voltage selector.Voltage selector.

Voltage selector.Voltage selector.

Voltage selector. This switch allows you to adjust the system

input voltage according to the voltage supply in your area. See the

“Voltage selector” section on page 1-6 before adjusting this switch.

12.12.

12. Power supply unit fan vent.Power supply unit fan vent.

Power supply unit fan vent.Power supply unit fan vent.

Power supply unit fan vent. This vent is for the PSU fan that

provides ventilation inside the power supply unit.

13.13.

13. Power supply unit power switch.Power supply unit power switch.

Power supply unit power switch.Power supply unit power switch.

Power supply unit power switch. This switch allows you to turn

ON or OFF the flow of power to the power supply unit.

14.14.

14. Chassis fan vent.Chassis fan vent.

Chassis fan vent.Chassis fan vent.

Chassis fan vent. This vent is for the fan that provides ventilation

inside the system chassis.

15.15.

15. IEEE 1394 port.IEEE 1394 port.

IEEE 1394 port.IEEE 1394 port.

IEEE 1394 port. This port connects IEEE 1394 devices such as

digital still/video cameras, camcorders, external disk drives, or other

devices.

16.16.

16. LAN (RJ-45) port.LAN (RJ-45) port.

LAN (RJ-45) port.LAN (RJ-45) port.

LAN (RJ-45) port. This port allows Gigabit connection to a Local

Area Network (LAN) through a network hub.

17.17.

17. Expansion slot coversExpansion slot covers

Expansion slot coversExpansion slot covers

Expansion slot covers. Remove these cover when installing

expansion cards.

Audio 2, 4, or 6-channel configurationAudio 2, 4, or 6-channel configuration

Audio 2, 4, or 6-channel configuration

Light Blue Line In Line In Line In

Lime Line Out Front Speaker Out Front Speaker Out

Pink Mic In Mic In Mic In

PortPort

Port HeadsetHeadset

HeadsetHeadset

Headset 4-channel4-channel

4-channel4-channel

4-channel 6-channel6-channel

6-channel6-channel

6-channel

2-channel2-channel

2-channel

1-61-6

1-6 Chapter 1: System introductionChapter 1: System introduction

Chapter 1: System introductionChapter 1: System introduction

Chapter 1: System introduction

Voltage selectorVoltage selector

Voltage selector

The PSU has a 115 V/230 V voltage selector switch located beside the

power connector. Use this switch to select the appropriate system input

voltage according to the voltage supply in your area.

If the voltage supply in your area is 100-127 V, set the switch to 115 V.

If the voltage supply in your area is 200-240 V, set the switch to 230 V.

Setting the switch to 115V in a 230V environment or 230V in a 115V

environment will seriously damage the system!

115V/230V115V/230V

115V/230V

Voltage selectorVoltage selector

Voltage selector

1-71-7

1-7

ASUS Vintage-PE1ASUS Vintage-PE1

ASUS Vintage-PE1

1. 5.25-inch drive bay

2. Floppy disk drive bay

3. Front panel cover

4. Hard disk drive bay

5. Chassis fan

6. ASUS motherboard

7. DIMM sockets

8. LGA775 socket with PnP cap

9. AGP 8X slot

10. PCI slots

11. Serial ATA connectors

12. Expansion card slots

13. Power supply unit

1.4 Internal components

The illustration below is the internal view of the system when you remove

the top cover and the power supply unit. The installed components are

labeled for your reference. Proceed to Chapter 2 for instructions on

installing additional system components.

533

1-81-8

1-8 Chapter 1: System introductionChapter 1: System introduction

Chapter 1: System introductionChapter 1: System introduction

Chapter 1: System introduction

2-152-15

2-15

ASUS Vintage-PE1ASUS Vintage-PE1

ASUS Vintage-PE1

2.6 Expansion slots

In the future, you may need to install expansion cards. The following

sub-sections describe the slots and the expansion cards that they support.

2.6.12.6.1

2.6.1 Installing an expansion cardInstalling an expansion card

Installing an expansion cardInstalling an expansion card

Installing an expansion card

To install an expansion card:

1. Before installing the expansion card, read the documentation that

came with it and make the necessary hardware settings for the card.

2. Remove the system unit cover (if your motherboard is already

installed in a chassis).

3. Remove the bracket opposite the slot that you intend to use. Keep

the screw for later use.

4. Align the card connector with the slot and press firmly until the card is

completely seated on the slot.

5. Secure the card to the chassis with the screw you removed earlier.

6. Replace the system cover.

Make sure to unplug the power cord before adding or removing

expansion cards. Failure to do so may cause you physical injury and

damage motherboard components.

2.6.22.6.2

2.6.2 Configuring an expansion cardConfiguring an expansion card

Configuring an expansion cardConfiguring an expansion card

Configuring an expansion card

After installing the expansion card, configure the it by adjusting the

software settings.

1. Turn on the system and change the necessary BIOS settings, if any.

See Chapter 5 for information on BIOS setup.

2. Assign an IRQ to the card. Refer to the tables on the next page.

3. Install the software drivers for the expansion card.

2-162-16

2-16 Chapter 2: Basic installationChapter 2: Basic installation

Chapter 2: Basic installationChapter 2: Basic installation

Chapter 2: Basic installation

Standard interrupt assignmentsStandard interrupt assignments

Standard interrupt assignments

IRQIRQ

IRQ PriorityPriority

PriorityPriority

Priority Standard FunctionStandard Function

Standard FunctionStandard Function

Standard Function

0 1 System Timer

1 2 Keyboard Controller

2 - Re-direct to IRQ#9

3 11 Communications Port (COM2)*

4 12 Communications Port (COM1)*

5 13 IRQ holder for PCI steering*

6 14 Floppy Disk Controller

7 15 Printer Port (LPT1)*

8 3 System CMOS/Real Time Clock

9 4 IRQ holder for PCI steering*

10 5 IRQ holder for PCI steering*

11 6 IRQ holder for PCI steering*

12 7 PS/2 Compatible Mouse Port*

13 8 Numeric Data Processor

14 9 Primary IDE Channel

15 10 Secondary IDE Channel

* These IRQs are usually available for ISA or PCI devices.* These IRQs are usually available for ISA or PCI devices.

* These IRQs are usually available for ISA or PCI devices.

IRQ assignments for this motherboardIRQ assignments for this motherboard

IRQ assignments for this motherboard

When using PCI cards on shared slots, ensure that the drivers support

“Share IRQ” or that the cards do not need IRQ assignments; otherwise,

conflicts will arise between the two PCI groups, making the system

unstable and the card inoperable.

ABB

BCC

CDD

DEE

EFF

FGG

GHH

PCI slot 1 — — — — — used — —

PCI slot 2 — — — — — — used —

PCI Express x16 slot shared — — — — — — —

PCI Express x1 slot1 — shared — — — — — —

Onboard USB controller 1 — — — — — — — shared

Onboard USB controller 2 — — — shared — — — —

Onboard USB controller 3 — — shared — — — — —

Onboard USB controller 4 shared — — — — — — —

Onboard USB 2.0 controller — — — — — — — shared

Onboard Azalia Audio shared — — — — — — —

Onboard IDE Controller — — shared — — — — —

Onboard SATA Controller — — — shared — — — —

Onboard LAN — — — — shared — — —

Other manuals for Vintage PE1

This manual suits for next models

Table of contents

Popular Desktop manuals by other brands

Phoenix Contact

Phoenix Contact BL2 PPC user manual

Lenovo

Lenovo IdeaCentre K210 Safety and Warranty Guide

Lenovo

Lenovo IdeaCentre A700 Quick reference guide

Sony

Sony VAIO VGC-RB50 quick start

Dynamic

Dynamic SFC332L Operator's manual

eglobal

eglobal G7-3865U instructions

Dell

Dell Vostro 3267 owner's manual

Toshiba

Toshiba KIRABOOK U930 user guide

Baum

Baum VarioUltra Frequently asked questions

Lenovo

Lenovo ThinkCentre M52 Hızlı Başvuru Kılavuzu

Hy-Gain

Hy-Gain HG-52SS manual

Dell

Dell XPS 8940 Service manual

HP Model 743 PC owner's guide

EVOC

EVOC IPC-6810E user manual

IBM

IBM Aptiva manual

Dell

Dell OptiPlex 5050 owner's manual

Gateway

Gateway One ZX4800 manual

Lenovo

Lenovo ThinkStation P358 Tower Hardware Maintenance Manual

Asus Vintage PE1 User manual

Popular Desktop manuals by other brands