Asus AAEON BOXER-8220AI Operation manual

Most Confidential
Confidential
Internal
Public
V
NVIDIA Jetson Nano Platform
ACLinux 4.9
BOXER-8220AI
Dec 2019
Revision 1.0
Installation User Guide

1
Revision History
Revision
Date
Description
1.0
Dec 2019
Initial release.

2
Contents
Revision History .......................................................................................1
1. Preparing...........................................................................................3
1.1. Pre-requisites..........................................................................3
1.2. In Linux Host............................................................................3
2. To Flash Image...................................................................................4
2.1. Flash Image to Board...............................................................4
2.2. Flash Image to Multi Device ....................................................6

3
1.Preparing
1.1. Pre-requisites
1) Prepare an image compressed file. Its name will be like
I. {OS_IF} is OS Information; e.g. ACLNX49D which ACLNX means
ACLinux, 49 means ACLinux 4.9 and X means Desktop version.
II. {PLF_IF} is Platform Information; e.g. NV03
III. {PJ_IF} is Project Information; e.g. BOXER-8220AI
IV. {BN} is Build Number; e.g. 0,1,2,…,N
2) Prepare one host PC that OS is Ubuntu 16.04 or 18.04
3) Prepare 16 GB or larger microSD card is inserted in the SD card
slot.
1.2. In Linux Host
1) Connect Host PC and BOXER-8220AI via microUSB, and connect
the power supply to BOXER-8220AI.
2) Unzip image compression file on Ubuntu Host PC.
12V
ACLinux_4.9_{OS_IF}.{PLF_IF}.{PJ_IF}.{BN}.tar.gz
micro USB

4
3) Press and hold down the recovery button and then press power
button to enter recovery mode.
2.To Flash Image
2.1. Flash Image to Board
1) Type [Ctrl] + [Alt] + [t] to open terminal on Ubuntu Host PC.
2) Enter the bootloader folder that you unzip.
3) Execute flashall.sh to flash image.
$ sudo ./flashall.sh
Recovery Button
Power Button

5
4) Flash image complete.

6
2.2. Flash Image to Multi Device
1) Type [Ctrl] + [Alt] + [t] to open terminal on Ubuntu Host PC.
2) Enter the bootloader folder that you unzip.
3) Copy flash_multi_dev.sh file to bootloader folder
4) Execute flash_multi_dev.sh to flash image.
$ chmod +x flash_multi_dev.sh
$ sudo ./ flash_multi_dev.sh