Asus P5gd1 pro User manual

Motherboard

P5GD1

PRO

iiii

No part of this manual, including the products and software described in it, may be reproduced,

transmitted, transcribed, stored in a retrieval system, or translated into any language in any form

or by any means, except documentation kept by the purchaser for backup purposes, without the

express written permission of ASUSTeK COMPUTER INC. (“ASUS”).

Product warranty or service will not be extended if: (1) the product is repaired, modified or

altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2)

the serial number of the product is defaced or missing.

ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER

EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES

OR CONDITIONS OF MERCHANTABILITY OR FITNESS FORA PARTICULAR PURPOSE.

IN NO EVENT SHALLASUS, ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE

LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES

(INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS, LOSS OF USE

OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF ASUS HAS BEEN

ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR

ERROR IN THIS MANUAL OR PRODUCT.

SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUALARE FURNISHED

FOR INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE ATANY TIME

WITHOUT NOTICE,AND SHOULD NOT BE CONSTRUEDAS ACOMMITMENT BYASUS.

ASUS ASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR

INACCURACIES THAT MAYAPPEAR IN THIS MANUAL, INCLUDING THE PRODUCTS

AND SOFTWARE DESCRIBED IN IT.

Products and corporate names appearing in this manual may or may not be registered

trademarks or copyrights of their respective companies, and are used only for identification or

explanation and to the owners’ benefit, without intent to infringe.

E1759E1759

E1759

First EditionFirst Edition

First Edition

August 2004August 2004

August 2004

iiiiii

iii

Contents

Notices ................................................................................................ vi

Safety information ............................................................................. vii

About this guide ............................................................................... viii

Typography ......................................................................................... ix

P5GD1 PRO specifications summary .................................................... x

Chapter 1: Product introductionChapter 1: Product introduction

Chapter 1: Product introduction

1.1 Welcome! .............................................................................. 1-2

1.2 Package contents ................................................................. 1-2

1.3 Special features .................................................................... 1-3

1.3.1 Product highlights................................................... 1-3

1.3.2 ASUS Proactive features ........................................ 1-5

1.3.3 Innovative ASUS features ....................................... 1-5

1.4 Before you proceed .............................................................. 1-6

1.5 Motherboard overview .......................................................... 1-7

1.5.1 Placement direction ................................................ 1-7

1.5.2 Screw holes ............................................................ 1-7

1.5.3 Motherboard layout ................................................ 1-8

1.6 Central Processing Unit (CPU) .............................................. 1-9

1.6.1 Installling the CPU ................................................... 1-9

1.6.2 Installling the CPU heatsink and fan ..................... 1-12

1.7 System memory ................................................................. 1-14

1.7.1 Overview ............................................................... 1-14

1.7.2 Memory Configurations ......................................... 1-14

1.7.3 Installing a DIMM ................................................... 1-17

1.7.4 Removing a DIMM ................................................. 1-17

1.8 Expansion slots ................................................................... 1-18

1.8.1 Installing an expansion card .................................. 1-18

1.8.2 Configuring an expansion card.............................. 1-18

1.8.3 Interrupt assignments .......................................... 1-19

1.8.4 PCI slots ................................................................ 1-20

1.8.5 PCI Express x16 slot ............................................. 1-20

1.8.6 PCI Express x1 slot ............................................... 1-20

1.9 Jumpers .............................................................................. 1-21

iviv

Contents

1.10 Connectors ......................................................................... 1-24

1.10.1 Rear panel connectors .......................................... 1-24

1.10.2 Internal connectors ............................................... 1-26

Chapter 2: BIOS setupChapter 2: BIOS setup

Chapter 2: BIOS setup

2.1 Managing and updating your BIOS ........................................ 2-2

2.1.1 Creating a bootable floppy disk .............................. 2-2

2.1.2 ASUS EZ Flash utility .............................................. 2-3

2.1.3 AFUDOS utility ........................................................ 2-4

2.1.4 ASUS CrashFree BIOS 2 utility ................................ 2-6

2.1.5 ASUS Update utility ................................................ 2-8

2.2 BIOS setup program ........................................................... 2-11

2.2.1 BIOS menu screen ................................................. 2-12

2.2.2 Menu bar ............................................................... 2-12

2.2.3 Navigation keys .................................................... 2-12

2.2.4 Menu items ........................................................... 2-13

2.2.5 Sub-menu items ................................................... 2-13

2.2.6 Configuration fields .............................................. 2-13

2.2.7 Pop-up window ..................................................... 2-13

2.2.8 Scroll bar .............................................................. 2-13

2.2.9 General help .......................................................... 2-13

2.3 Main menu .......................................................................... 2-14

2.3.1 System Time ......................................................... 2-14

2.3.2 System Date ......................................................... 2-14

2.3.3 Legacy Diskette A ................................................ 2-14

2.3.4 Language .............................................................. 2-14

2.3.5 Primary, Third and Fourth IDE Master/Slave ......... 2-15

2.3.6 IDE Configuration .................................................. 2-16

2.3.7 System Information .............................................. 2-18

2.4 Advanced menu .................................................................. 2-19

2.4.1 JumperFree Configuration .................................... 2-19

2.4.2 LAN Cable Status ................................................. 2-22

2.4.3 USB Configuration ................................................. 2-23

2.4.4 CPU Configuration ................................................. 2-24

2.4.5 Chipset ................................................................. 2-25

Contents

2.4.6 Onboard Devices Configuration ............................ 2-27

2.4.7 PCI PnP ................................................................. 2-28

2.5 Power menu ........................................................................ 2-30

2.5.1 Suspend Mode ...................................................... 2-30

2.5.2 Repost Video on S3 Resume ................................ 2-30

2.5.3 ACPI 2.0 Support .................................................. 2-30

2.5.4 ACPI APIC Support ................................................ 2-30

2.5.5 APM Configuration ................................................ 2-31

2.5.6 Hardware Monitor ................................................. 2-33

2.6 Boot menu .......................................................................... 2-34

2.6.1 Boot Device Priority .............................................. 2-35

2.6.2 Boot Settings Configuration ................................. 2-35

2.6.3 Security ................................................................ 2-37

2.7 Exit menu ........................................................................... 2-39

Chapter 3: Software supportChapter 3: Software support

Chapter 3: Software support

3.1 Installing an operating system ............................................. 3-2

3.2 Support CD information ........................................................ 3-2

3.2.1 Running the support CD ......................................... 3-2

3.2.2 Drivers menu .......................................................... 3-3

3.2.3 Utilities menu .......................................................... 3-4

3.2.4 Manuals menu ......................................................... 3-5

3.2.5 ASUS Contact information ...................................... 3-6

3.3 RAID configurations .............................................................. 3-7

3.3.1 Installing hard disks ................................................ 3-8

3.3.2 Intel

RAID configurations ...................................... 3-9

vivi

Notices

Federal Communications Commission StatementFederal Communications Commission Statement

Federal Communications Commission Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to

the following two conditions:

•

This device may not cause harmful interference, and

•

This device must accept any interference received including interference

that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with

manufacturer’s instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

•

Reorient or relocate the receiving antenna.

•

Increase the separation between the equipment and receiver.

•

Connect the equipment to an outlet on a circuit different from that to

which the receiver is connected.

•

Consult the dealer or an experienced radio/TV technician for help.

Canadian Department of Communications StatementCanadian Department of Communications Statement

Canadian Department of Communications Statement

This digital apparatus does not exceed the Class B limits for radio noise

emissions from digital apparatus set out in the Radio Interference

Regulations of the Canadian Department of Communications.

This class B digital apparatus complies with CanadianThis class B digital apparatus complies with Canadian

This class B digital apparatus complies with Canadian

ICES-003.ICES-003.

ICES-003.

The use of shielded cables for connection of the monitor to the graphics

card is required to assure compliance with FCC regulations. Changes or

modifications to this unit not expressly approved by the party

responsible for compliance could void the user’s authority to operate

this equipment.

viivii

vii

Safety information

Electrical safetyElectrical safety

Electrical safety

•

To prevent electrical shock hazard, disconnect the power cable from

the electrical outlet before relocating the system.

•

When adding or removing devices to or from the system, ensure that

the power cables for the devices are unplugged before the signal cables

are connected. If possible, disconnect all power cables from the existing

system before you add a device.

•

Before connecting or removing signal cables from the motherboard,

ensure that all power cables are unplugged.

•

Seek professional assistance before using an adapter or extension cord.

These devices could interrupt the grounding circuit.

•

Make sure that your power supply is set to the correct voltage in your

area. If you are not sure about the voltage of the electrical outlet you

are using, contact your local power company.

•

If the power supply is broken, do not try to fix it by yourself. Contact a

qualified service technician or your retailer.

Operation safetyOperation safety

Operation safety

•

Before installing the motherboard and adding devices on it, carefully read

all the manuals that came with the package.

•

Before using the product, make sure all cables are correctly connected

and the power cables are not damaged. If you detect any damage,

contact your dealer immediately.

•

To avoid short circuits, keep paper clips, screws, and staples away from

connectors, slots, sockets and circuitry.

•

Avoid dust, humidity, and temperature extremes. Do not place the

product in any area where it may become wet.

•

Place the product on a stable surface.

•

If you encounter technical problems with the product, contact a qualified

service technician or your retailer.

viiiviii

viii

About this guide

This user guide contains the information you need when installing and

configuring the motherboard.

How this guide is organizedHow this guide is organized

How this guide is organized

This manual contains the following parts:

••

•Chapter 1: Product introductionChapter 1: Product introduction

Chapter 1: Product introductionChapter 1: Product introduction

Chapter 1: Product introduction

This chapter describes the features of the motherboard and the new

technology it supports. This chapter also lists the hardware setup

procedures that you have to perform when installing system

components. It includes description of the jumpers and connectors on

the motherboard.

••

•Chapter 2: BIOS setupChapter 2: BIOS setup

Chapter 2: BIOS setupChapter 2: BIOS setup

Chapter 2: BIOS setup

This chapter tells how to change system settings through the BIOS

Setup menus. Detailed descriptions of the BIOS parameters are also

provided.

••

•Chapter 3: Software supportChapter 3: Software support

Chapter 3: Software supportChapter 3: Software support

Chapter 3: Software support

This chapter describes the contents of the support CD that comes

with the motherboard package.

Where to find more informationWhere to find more information

Where to find more information

Refer to the following sources for additional information and for product

and software updates.

1.1.

1. ASUS websitesASUS websites

ASUS websitesASUS websites

ASUS websites

The ASUS website provides updated information on ASUS hardware

and software products. Refer to the ASUS contact information.

2.2.

2. Optional documentationOptional documentation

Optional documentationOptional documentation

Optional documentation

Your product package may include optional documentation, such as

warranty flyers, that may have been added by your dealer. These

documents are not part of the standard package.

ixix

Conventions used in this guideConventions used in this guide

Conventions used in this guide

To make sure that you perform certain tasks properly, take note of the

following symbols used throughout this manual.

Typography

DANGER/WARNING:DANGER/WARNING:

DANGER/WARNING: Information to prevent injury to yourself

when trying to complete a task.

CAUTION:CAUTION:

CAUTION: Information to prevent damage to the components

when trying to complete a task.

NOTE:NOTE:

NOTE: Tips and additional information to help you complete a

task.

IMPORTANT:IMPORTANT:

IMPORTANT: Instructions that you MUST follow to complete a

task.

Bold textBold text

Bold text Indicates a menu or an item to select

Italics

Used to emphasize a word or a phrase

<Key> Keys enclosed in the less-than and greater-than sign means

that you must press the enclosed key

Example: <Enter> means that you must press the Enter or

Return key

<Key1+Key2+Key3> If you must press two or more keys simultaneously, the

key names are linked with a plus sign (+)

Example: <Ctrl+Alt+D>

Command Means that you must type the command exactly as shown,

then supply the required item or value enclosed in

brackets

Example: At the DOS prompt, type the command line:

afudos /i[filename]

afudos /iP5GD1P.ROM

P5GD1 PRO specifications summary

(continued on the next page)

CPUCPU

CPU

ChipsetChipset

Chipset

Front Side BusFront Side Bus

Front Side Bus

MemoryMemory

Memory

Expansion slotsExpansion slots

Expansion slots

StorageStorage

Storage

High DefinitionHigh Definition

High Definition

AudioAudio

Audio

LANLAN

LAN

OverclockingOverclocking

Overclocking

USBUSB

USB

Special featuresSpecial features

Special features

LGA775 socket for Intel

Pentium

4/Celeron processor

Compatible with the Intel

PCG 04A and 04B processors

Supports Intel

Hyper-Threading Technology

Northbridge: Intel

915P Memory Controller Hub (MCH)

Southbridge: Intel

ICH6R

800/533 MHz

Dual-channel memory architecture

4 x 184-pin DIMM sockets support unbufferred non-ECC

400/333 MHz DDR memory modules

1 x PCI Express x16 slot for discrete graphics card

3 x PCI Express x1 slots

3 x PCI slots

Intel

ICH6R Southbridge supports:

-1x Ultra DMA 100/66/33

-4x Serial ATA with RAID 0, RAID 1 configuration

and the Intel

Matrix Storage Technology

Intel

High Definition Audio

Realtek

ALC861 8-channel CODEC with Jack-sensing

and Universal Audio Jack (UAJ

) technology

S/PDIF out interface support

Marvell

88E8053 PCI Express™ Gigabit LAN controller

Supports Marvell

Virtual Cable Tester Technology

Supports POST Network-diagnostic program

ASUS AI NOS (Non-delay Overclocking System) feature

ASUS AI Overclocking (Intelligent CPU frequency tuner)

ASUS C.P.R. (CPU Parameter Recall)

CPU, Memory, and PCI Express voltage adjustable

Stepless Frequency Selection(SFS) from 100 MHz up

to 400 MHz at 1 MHz increment

Adjustable FSB/DDR ratio with fixed PCI/PCI-Express

frequencies

Supports up to 8 USB 2.0 ports

ASUS Q-Fan

ASUS CrashFree BIOS 2

ASUS Multi-language BIOS

ASUS MyLogo™

xixi

*Specifications are subject to change without notice.

P5GD1 PRO specifications summary

BIOS featuresBIOS features

BIOS features

Rear panelRear panel

Rear panel

InternalInternal

Internal

connectorsconnectors

connectors

PowerPower

Power

RequirementRequirement

Requirement

Form FactorForm Factor

Form Factor

Support CDSupport CD

Support CD

contentscontents

contents

4 MB Flash ROM, AMI BIOS, PnP, DMI2.0, SM BIOS 2.3,

WfM2.0

1 x Parallel port

1 x LAN (RJ-45) port

1 x Rear speaker out port

1 x Side speaker out port

1 x Line In port

1 x Line Out port

1 x Microphone port

1 x Center/Subwoofer port

4 x USB 2.0 ports

1 x Serial port (COM)

1 x Coaxial S/PDIF out port

1 x PS/2 keyboard port

1 x PS/2 mouse port

1 x CPU fan connector

1 x Power fan connector

1 x Chassis fan connector

1 x 24-pin ATX power connector

1 x 4-pin ATX 12 V power connector

2 x USB 2.0 connectors for 4 additional USB 2.0 ports

1 x Optical drive audio connector

1 x Chassis intrusion connector

1 x Front panel audio connector

1 x S/DIF out connector

System panel connector

ATX power supply (with 24-pin and 4-pin 12 V plugs)

ATX 12 V 2.0 compliant

ATX form factor: 12 in x 9.6 in (30.5 cm x 24.4 cm)

Device drivers

ASUS PC Probe

ASUS Live Update utility

Anti-virus software (OEM version)

xiixii

xii

ASUS P5GD1 PROASUS P5GD1 PRO

ASUS P5GD1 PRO 1-11-1

1-11-1

1-1

Product

introduction

This chapter describes the motherboard

features and the new technologies

it supports.

1-21-2

1-2 Chapter 1: Product introductionChapter 1: Product introduction

Chapter 1: Product introductionChapter 1: Product introduction

Chapter 1: Product introduction

1.1 Welcome!

Thank you for buying an ASUSThank you for buying an ASUS

Thank you for buying an ASUS

®®

P5GD1 PRO motherboard!P5GD1 PRO motherboard!

P5GD1 PRO motherboard!

The motherboard delivers a host of new features and latest technologies,

making it another standout in the long line of ASUS quality motherboards!

Before you start installing the motherboard, and hardware devices on it,

check the items in your package with the list below.

1.2 Package contents

Check your motherboard package for the following items.

MotherboardMotherboard

Motherboard ASUS P5GD1 PRO motherboard

CablesCables

Cables 1 x Serial ATA signal cables

1 x Serial ATA power cables

1 x Ultra DMA/133 cables

1 x IDE cable

Floppy disk drive cable

AccessoriesAccessories

Accessories I/O shield

Application CDsApplication CDs

Application CDs ASUS motherboard support CD

DocumentationDocumentation

Documentation User guide

If any of the above items is damaged or missing, contact your retailer.

ASUS P5GD1 PROASUS P5GD1 PRO

ASUS P5GD1 PRO 1-31-3

1-31-3

1-3

1.3 Special features

1.3.11.3.1

1.3.1 Product highlightsProduct highlights

Product highlightsProduct highlights

Product highlights

Latest processor technologyLatest processor technology

Latest processor technology

The motherboard comes with a 775-pin surface mount Land Grid Array

(LGA) socket designed for the Intel

Pentium

4 processor in the 775-land

package. The motherboard supports the Intel

Pentium

4 processor with

800 MHz Front Side Bus (FSB), 1 MB L2 cache, and core speed of up to

3.6 GHz. The motherboard also supports the Intel

Hyper-Threading

Technology and is fully compatible with Intel

04B and 04A processors.

See page 1-9 for details.

IntelIntel

Intel

®®

915P915P

915P

The Intel

915P chipset provides the interface for a processor in the

775-land package with 533/800MHz front side bus (FSB), dual channel

DDR at speeds of up to 400MHz, and PCI Express x16-lane port for

graphics card. The Intel

915P GMCH platform is compliant to the Direct

Media Interface (DMI) and supports the sixth generation I/O Controller Hub

(ICH6R).

Dual-channel DDR memory supportDual-channel DDR memory support

Dual-channel DDR memory support

Employing the Double Data Rate (DDR) memory technology, the

motherboard supports up to 4GB of system memory using DDR400/333

DIMMs. The ultra-fast 400MHz memory bus delivers the required bandwidth

for the latest 3D graphics, multimedia, and Internet applications. See page

1-14 for details.

PCI Express™ interfacePCI Express™ interface

PCI Express™ interface

The motherboard fully supports PCI Express, the latest I/O interconnect

technology that speeds up the PCI bus. PCI Express features point-to-point

serial interconnections between devices and allows higher clockspeeds by

carrying data in packets. This high speed interface is software compatible with

existing PCI specifications. See page 1-20 for details.

Serial ATA technologySerial ATA technology

Serial ATA technology

The motherboard supports the Serial ATA technology through the Serial ATA

interfaces and the Intel

ICH6R. The SATA specification allows for thinner,

more flexible cables with lower pin count, reduced voltage requirement, and

up to 150 MB/s data transfer rate.

1-41-4

1-4 Chapter 1: Product introductionChapter 1: Product introduction

Chapter 1: Product introductionChapter 1: Product introduction

Chapter 1: Product introduction

Onboard RAID solutionOnboard RAID solution

Onboard RAID solution

The onboard Intel

ICH6R allows RAID 0 and RAID 1 configuration for four

SATA connectors and supports the Intel

Matrix Storage Technology. See

page 3-7 for details.

8-channel high definition audio8-channel high definition audio

8-channel high definition audio

The motherboard supports 8-channel High Definition Audio through the

onboard ALC861 CODEC with 24-bit DAC, a stereo 16-bit ADC, and an

AC97 2.3 compatible multi-channel audio designed for PC multimedia

systems. It also provides a Jack-Sensing function, S/PDIF out support,

interrupt capability and includes the Realtek

proprietary UAJ

(Universal

Audio Jack) technology. See page 1-24 and 1-25 for details.

S/PDIF digital sound readyS/PDIF digital sound ready

S/PDIF digital sound ready

The motherboard supports the S/PDIF Out function through the S/PDIF

interfaces on the rear panel and at midboard. The S/PDIF technology turns

your computer into a high-end entertainment system with digital connectivity

to powerful audio and speaker systems. See page 1-25 for details.

USB 2.0 technologyUSB 2.0 technology

USB 2.0 technology

The motherboard implements the Universal Serial Bus (USB) 2.0

specification, dramatically increasing the connection speed from the

12 Mbps bandwidth on USB 1.1 to a fast 480 Mbps on USB 2.0. USB 2.0 is

backward compatible with USB 1.1. See page 1-25 for details.

Temperature, fan, and voltage monitoringTemperature, fan, and voltage monitoring

Temperature, fan, and voltage monitoring

The CPU temperature is monitored by the ASIC (integrated in the Winbond

Super I/O) to prevent overheating and damage. The system fan rotations

per minute (RPM) is monitored for timely failure detection. The ASIC

monitors the voltage levels to ensure stable supply of current for critical

components.

ASUS P5GD1 PROASUS P5GD1 PRO

ASUS P5GD1 PRO 1-51-5

1-51-5

1-5

1.3.31.3.3

1.3.3 Innovative ASUS featuresInnovative ASUS features

Innovative ASUS featuresInnovative ASUS features

Innovative ASUS features

CrashFree BIOS 2CrashFree BIOS 2

CrashFree BIOS 2

This feature allows you to restore the original BIOS data from the support CD

in case when the BIOS codes and data are corrupted. This protection

eliminates the need to buy a replacement ROM chip. See details on page 2-6.

ASUS Q-Fan technologyASUS Q-Fan technology

ASUS Q-Fan technology

The ASUS Q-Fan technology smartly adjusts the CPU fan speed according

to the system loading to ensure quiet, cool, and efficient operation. See

page 2-33 for details.

ASUS Multi-language BIOSASUS Multi-language BIOS

ASUS Multi-language BIOS

The multi-language BIOS allows you to select the language of your choice

from the available options. The localized BIOS menus allow you to configure

easier and faster. See page 2-14 for details.

ASUS MyLogo™ASUS MyLogo™

ASUS MyLogo™

This new feature present in the motherboard allows you to personalize and

add style to your system with customizable boot logos. See page 2-35.

1.3.21.3.2

1.3.2 ASUS Proactive featuresASUS Proactive features

ASUS Proactive featuresASUS Proactive features

ASUS Proactive features

AI NOS™ (Non-Delay Overclocking System)AI NOS™ (Non-Delay Overclocking System)

AI NOS™ (Non-Delay Overclocking System)

The ASUS Non-delay Overclocking System™ (NOS) is a technology that

auto-detects the CPU loading and dynamically overclocks the CPU speed

only when needed. See page 2-20.

AI NET2AI NET2

AI NET2

The AI NET2 is a BIOS-based diagnostic tool that detects and reports

Ethernet cable faults and shorts. With this utility, you can easily monitor

the condition of the Ethernet cable(s) connected to the LAN (RJ-45)

port(s). During the bootup process, AI NET2 immediately diagnoses the

LAN cable(s) and reports shorts and faults up to 100 meters at 1 meter

accuracy. See pages 1-24 and 2-22.

1-61-6

1-6 Chapter 1: Product introductionChapter 1: Product introduction

Chapter 1: Product introductionChapter 1: Product introduction

Chapter 1: Product introduction

Onboard LEDOnboard LED

Onboard LED

The motherboard comes with a standby power LED that lights up to

indicate that the system is ON, in sleep mode, or in soft-off mode.

This is a reminder that you should shut down the system and unplug

the power cable before removing or plugging in any motherboard

component. The illustration below shows the location of the onboard

LED.

1.4 Before you proceed

Take note of the following precautions before you install motherboard

components or change any motherboard settings.

•Unplug the power cord from the wall socket before touching any

component.

• Use a grounded wrist strap or touch a safely grounded object or to

a metal object, such as the power supply case, before handling

components to avoid damaging them due to static electricity

•Hold components by the edges to avoid touching the ICs on them.

•Whenever you uninstall any component, place it on a grounded

antistatic pad or in the bag that came with the component.

•Before you install or remove any component, ensureBefore you install or remove any component, ensure

Before you install or remove any component, ensureBefore you install or remove any component, ensure

Before you install or remove any component, ensure

that the ATX power supply is switched off or thethat the ATX power supply is switched off or the

that the ATX power supply is switched off or the

power cord is detached from the power supply.power cord is detached from the power supply.

power cord is detached from the power supply. Failure

to do so may cause severe damage to the motherboard, peripherals,

and/or components.

P5GD1 PRO

P5GD1 PRO Onboard LED

SB_PWR

Standby

Power

OFF

Powered

Off

ASUS P5GD1 PROASUS P5GD1 PRO

ASUS P5GD1 PRO 1-71-7

1-71-7

1-7

1.5 Motherboard overview

Before you install the motherboard, study the configuration of your chassis

to ensure that the motherboard fits into it.

Make sure to unplug the power cord before installing or removing the

motherboard. Failure to do so can cause you physical injury and damage

motherboard components.

Do not overtighten the screws! Doing so can damage the motherboard.

1.5.11.5.1

1.5.1 Placement directionPlacement direction

Placement directionPlacement direction

Placement direction

When installing the motherboard, make sure that you place it into the

chassis in the correct orientation. The edge with external ports goes to the

rear part of the chassis as indicated in the image below.

1.5.21.5.2

1.5.2 Screw holesScrew holes

Screw holesScrew holes

Screw holes

Place nine (9) screws into the holes indicated by circles to secure the

motherboard to the chassis.

Place this side towardsPlace this side towards

Place this side towards

the rear of the chassisthe rear of the chassis

the rear of the chassis

P5GD1 PRO

1-81-8

1-8 Chapter 1: Product introductionChapter 1: Product introduction

Chapter 1: Product introductionChapter 1: Product introduction

Chapter 1: Product introduction

1.5.31.5.3

1.5.3 Motherboard layoutMotherboard layout

Motherboard layoutMotherboard layout

Motherboard layout

P5GD1 PRO

CR2032 3V

Lithium Cell

CMOS Power

Super

I/O

Intel FWH

4Mb

ATX12V

FLOPPY

AAFP

DDR DIMM_A1 (64 bit,184-pin module)

KBPWR

SB_PWR

USBPW34

USBPW12

24.5cm (9.6in)

30.5cm (12.0in)

PANEL

CHASSIS

USB78

USB56

USBPW56

USBPW78 CLRTC

SATA1

CHA_FAN

PCI1

Intel

Grantsdale-P

MCH

Intel

ICH6R

DDR DIMM_A2 (64 bit,184-pin module)

DDR DIMM_B1 (64 bit,184-pin module)

DDR DIMM_B2 (64 bit,184-pin module)

PWR_FAN CPU_FAN

PRI_IDE1

ALC861

EATXPWR

SATA3

SATA2 SATA4

PCI2

PCI3

SPDIF_OUT

Marvell

88E8053

LGA775

PS/2KBMS

T: Mouse

B: Keyboard

Below:Mic In

Center:Line Out

Top:Line In

PARALLEL PORT

COM1

SPDIF_O

Below:Bass

Center:

Side surround L/R

Top:

Back surround L/R

F_USB12

LAN_USB12

PCIEX1_1

PCIEX1_2

PCIEX1_3

PCIEX16

Other manuals for P5GD1 Pro

Table of contents

Other Asus Motherboard manuals

Asus

Asus P8Q67-M DO TPM User manual

Asus

Asus PRIME H470-PLUS User manual

Asus

Asus P8Z68-V PRO User manual

Asus

Asus TUF GAMING B460M-PLUS (WI-FI) User manual

Asus

Asus PRIME B760M-K D4 User manual

Asus

Asus P8Z77-V LE PLUS User manual

Asus

Asus P4BGL-VM User manual

Asus

Asus EX-B150M-V5 User manual

Asus

Asus M4A785TD-V EVO - Motherboard - ATX User manual

Asus

Asus B85M-E R2.0 User manual

Asus

Asus EX-B760M-V5 User manual

Asus

Asus Motherboard P4PE BP User manual

Asus

Asus TUF GAMING H770-PRO WIFI User manual

Asus

Asus P5N32-SLI-Deluxe Instructions for use

Asus

Asus ROG STRIX X299-XE GAMING User manual

Asus

Asus PRIME A520M-E User manual

Asus

Asus PU-DL User manual

Asus

Asus P9D-I User manual

Asus

Asus Q170S1 User manual

Asus

Asus E3-PRO V5 User manual

Asus

Asus KN97 User manual

Asus

Asus PRIME B350-PLUS User manual

Asus

Asus Motherboard P5MT-S User manual

Asus

Asus SABERTOOTH Z97 MARK 1 User manual

Popular Motherboard manuals by other brands

Linear Technology

Linear Technology DC2160A Demo Manual

Linear

Linear ANALOG DEVICES DC2685B Demo Manual

MiTAC

MiTAC Tyan S5542 manual

MSI

MSI B450M-A PRO MAX user guide

Huananzhi

Huananzhi HM65M-I user manual

sparkfun

sparkfun nRF52832 HOOK-UP GUIDE

Microsemi

Microsemi SmartFusion2 MSS Quick start card

ASROCK

ASROCK X570 Phantom Gaming-ITX/TB3 manual

Lyno

Lyno M1507_EVB user manual

Analog Devices

Analog Devices MICROCONVERTER ADUC812 Get started guide

MSI

MSI IMGS45-M user manual

AIC

AIC GB109-PH user manual

SMSC

SMSC LAN9514 user manual

HOLT

HOLT HI?8470 quick start guide

Supero

Supero H8QG6-F user manual

Intel

Intel BI440ZX Product guide

Analog Devices

Analog Devices MAX77857 manual

Intel

Intel D945PLRN specification

Asus P5GD1 Pro User manual

Popular Motherboard manuals by other brands