Asus P5KPL-CM User manual

Quick Start Guide
First Edition V1 Published JANUARY 2008 Copyright © 2008 ASUSTeK
COMPUTER INC. All Rights Reserved.
QE3662
P5KPL-CM
Français
Deutsch
Italiano
Español
Русский
Português
Polski
Česky
Magyar
Бъпгарски
Română
Srpski
qe3662_P5KPL-CM QSG.indd 1 2008.2.15 10:10:54 AM

2 ASUS P5KPL-CM
1. Motherboard layout
2. Installing the CPU
Follow these steps to install an Intel®processor in the 775-land package.
1. Press the load lever with your thumb (A), then move it to the left (B) until it is
released from the retention tab.
Retention tab
Load lever
This side of the cam box
should face you.
PnP cap
A
B
20.3cm (8in)
24.5cm (9.6in)
DDR2 DIMM_A1 (64 bit,240-pin module) DDR2 DIMM_B1 (64 bit,240-pin module)
P5KPL-CM
LAN_USB12
AUDIO
LGA775
CPU_FAN
Super I/O
CHA_FAN
FLOPPY
PRI_IDE
SATA1 SATA2 SATA3 SATA4
Intel ICH7
Intel G31
CLRTC
CHASSIS
USB56
F_PANEL
8Mb
BIOS
SPDIF_OUT
SPEAKER
CD
AAFP
PCI2
PCI1
PCIEX16
PCIEX1_1
VT1708B
PS2_USBPW
CR2032 3V
Lithium Cell
CMOS Power
ATX12V
PARALLEL PORT
VGA COM1
PS/2KBMS
T: Mouse
B: Keyboard
USB34
EATXPWR
R
ATHEROS
AR8121
Clock Gen 954
SB_PWR
USB78
CLRTC
Normal Clear RTC
(Default)
1 2 2 3
3
2
2
1
PS2_USBPW
(Default)
+5V
+5VSB
F_PANEL
PLED- PWR PLED+
Ground
GNDReset
IDELED+
IDELED-
+HD LED RESET
PLED PWRBTN
PWR_FAN
qe3662_P5KPL-CM QSG.indd 2 2008.2.15 10:10:55 AM

ASUS P5KPL-CM 3
3. System Memory
You may install 256 MB, 512 MB, 1 GB and 2 GB unbuffered non-ECC DDR2
DIMMs into the DIMM sockets.
2. Lift the load lever in the direction of the arrow to a 135º angle.
3. Lifttheloadplatewithyourthumbandforengertoa100ºangle,thenpush
the PnP cap from the load plate window to remove it.
4. Position the CPU over the socket, making sure that the gold triangle is on the
bottom-leftcornerofthesocket.Thesocketalignmentkeyshouldtintothe
CPU notch.
5. Close the load plate, then push the load lever until it snaps into the retention
tab.
• To prevent damage to the socket pins, do not remove the PnP
cap unless you are installing a CPU.
• Please keep the cap for product return.
• The product warranty does not cover damage to the socket
pins.
• You may install varying memory sizes in Channel A and Channel B. The
system maps the total size of the lower-sized channel for the dual-channel
conguration.Anyexcessmemoryfromthehigher-sizedchannelisthen
mapped for single-channel operation.
• Always install DIMMs with the same CAS latency. For optimum compatibility,
it is recommended that you obtain memory modules from the same vendor.
• If you install two 2GB memory modules, the system may only recognize less
than 3GB because the address space is reserved for other critical functions.
This limitation appears on Windows®XP 32-bit operation system which does
notsupportPhysicalAddressExtension(PAE).
• If you install Windows®XP 32-bit operation system, a total memory of less
than 3GB is recommended.
• This motherboard does not support memory modules made up of 128 Mb
chipsordoublesidedx16memorymodules.
Channel Sockets
Channel A DIMM_A1
Channel B DIMM_B1
qe3662_P5KPL-CM QSG.indd 3 2008.2.15 10:10:55 AM

4 ASUS P5KPL-CM
4. BIOS information
The Flash ROM on the motherboard contains the BIOS. You can update the
BIOSinformationorconguretheparametersusingtheBIOSSetuputility.The
BIOS screens include navigation keys and brief online help to guide you. If you
encounter system problems, or if the system becomes unstable after you changed
settings, load the Setup Defaults. Refer to Chapter 2 of the user guide for detailed
BIOS information. Visit the ASUS website (www.asus.com) for updates.
To enter Setup at start up:
Press <Delete> during the Power-On Self Test (POST). If you do not press
<Delete>, POST continues with its test routines.
To enter Setup after POST:
• Restart the system by pressing <Ctrl> + <Alt> + <Delete>, then press <Delete>
during POST, or
• Press the reset button on the chassis, then press <Delete> during POST, or
• Turn the system off and back on, then press <Delete> during POST
To update the BIOS with AFUDOS:
BootthesystemfromaoppydiskthatcontainsthelatestBIOSle.AttheDOS
prompt, type afudos /i<lename.rom> and press Enter. Reboot the system when
the update is complete.
To update the BIOS with ASUS EZ Flash 2:
Boot the system and press <Alt> + <F2> during POST to launch EZ Flash 2.
InsertaoppydiskorUSBashdiskthatcontainsthelatestBIOSle.EZFlash
2 performs the BIOS update process and automatically reboots the system when
done.
To recover the BIOS with CrashFree BIOS 3:
Boot the system. If the BIOS is corrupted, the CrashFree BIOS 3 auto recovery
toolpromptsyoutoinsertaoppydisk,CDorUSBashdiskthatcontainsthe
originalorlatestBIOSle.RebootthesystemaftertheBIOSisrecovered.
5. Software support CD information
This motherboard supports Windows®2000/2000 Sever/2003 Sever/XP/Vista/
64-bit 2003 Sever/64-bit XP/64-bit Vista operating system (OS). Always install the
latestOSversionandcorrespondingupdatessoyoucanmaximizethefeaturesof
your hardware.
The support CD that came with the motherboard contains useful software and
several utility drivers that enhance the motherboard features. To begin using the
support CD, simply insert the CD into your CD-ROM drive. The CD automatically
displays the welcome screen and the installation menus if Autorun is enabled in
your computer. If the welcome screen did not appear automatically, locate and
double-clickontheleASSETUP.EXEfromtheBINfolderinthesupportCDto
display the menus.
qe3662_P5KPL-CM QSG.indd 4 2008.2.15 10:10:56 AM