Asus V1J User manual
Index
1. English .................................................................................1
2. Türkçe ................................................................................41
3. .............................................................................81
4. ...............................................................................121
.............................................................................161
6. Bahasa Indonesia ............................................................201
7. Italiano..............................................................................241
8. 한국어 ..............................................................................281
9. Polski................................................................................321
10. Português.........................................................................361
............................................................................401
12. ..............................................................................441
13. Srpski ...............................................................................481
14. Español ............................................................................521
15. ไทย...................................................................................561
.........................................................................601
17. ................................................................................641
18. ................................................................................681
Motherboard
Motherboard
installation guide
E4204
September 2008
Copyright © 2008 ASUSTeK COMPUTER INC. All Rights Reserved.
permission of ASUSTeK COMPUTER INC. (“ASUS”).
product is defaced or missing.
Safety information
Electrical safety
•
•
power cables for the devices are unplugged before the signal cables are
•
Before connecting or removing signal cables from the motherboard, ensure
that all power cables are unplugged.
•
Seek professional assistance before using an adpater or extension cord.
These devices could interrupt the grounding circuit.
•
•
Operation safety
•
the manuals that came with the package.
•
•
•
•
Place the product on a stable surface.
•
4
English
1.1.1 Intel LGA775 Socket
motherboard. 2. Release the load lever from the
retention tab and lift the load plate.
Then push the PnP cap from the
load plate window to remove
To prevent damage to the socket
pins, do not remove the PnP cap
3. Position the CPU over the socket. 4. Make sure that the gold triangle
is on the bottom‑left corner of the
socket.
Chapter 1: Quick Start
1.1 Installing the CPU
Pick and Place Cap (PnP Cap)
ASUS Motherboard installation guide 5
English
6. Close the load plate, then push the load lever until it snaps into the retention
tab.
CPU into the socket to prevent
bending the connectors on the
socket and damaging the CPU!
1.1.2 Intel LGA1366 Socket
motherboard.
To prevent damage to the socket
pins, do not remove the PnP cap
thumb (A), then move it to the left
(B) until it is released from the
retention tab.
A
B
Load lever
Retention tab
the arrow to a 135º angle.
Load plate
4
3
6
English
socket to prevent bending the connectors on the socket and damaging the CPU!
6. Position the CPU over the socket,
making sure that the gold triangle
is on the bottom‑left corner of the
5. Remove the PnP cap from the CPU
socket.
PnP cap
Gold
triangle
mark
Alignment key
CPU notch
8. Close the load plate (A), and then
push the load lever (B) until it snaps
into the retention tab. A
B
ASUS Motherboard installation guide 7
English
3. Position the CPU above the socket
such that the CPU corner with the
gold triangle matches the socket
corner with a small triangle.
down the socket lever to secure the
CPU. The lever clicks on the side tab
to indicate that it is locked.
socket to prevent bending the connectors on the socket and damaging the CPU!
1.1.3 AMD AM2 Socket
motherboard.
the socket, then lift it up to a 90º
angle.
Make sure that the socket lever is lifted up to 90º angle. Otherwise, the CPU will
8
English
1.2 Installing the heatsink and fan
For Intel-certied heatsink:
2. Some heatsinks will come with
pre‑applied thermal paste. If so,
do not scrape it off and remove
installation. If not, before installing
thermal paste to the exposed area
of the CPU that the heatsink will be
in contact with. Make sure that it is
3. Orient each fastener with the
narrow end of the groove pointing
outward.
ASUS Motherboard installation guide 9
English
A
B
A
B
4. Push down two fasteners at a time
in a diagonal sequence to secure
place.
5. Connect the CPU fan cable to the
corresponding connector on the
motherboard.
directional heatsink to gain the maximum heat dissipation area.
12
34
For AMD-certied heatsink:
10
English
1.3 Installing a DIMM
motherboard and the components.
1. Press the retaining clips outward
matches the break on the socket.
socket until the retaining clips
motherboard package.
Unlocked retaining clip
DDR2 DIMM notch
1
2
3
1
1.4 Installing the motherboard
1. I/O ports differ with motherboards.
Use and install the rear I/O shield
that comes with the motherboard
Some sharp edges and points
puncture resistant gloves before
motherboard and I/O shield
installation.
ASUS Motherboard installation guide 11
English
2. Install the standoffs to the matched
screw holes on the metal plate.
damage the I/O ports. Be cautious
when installing the I/O shield.
4. Position the I/O side of the
motherboard toward the rear of the
chassis and place the motherboard
into the chassis.
After all the screws have been
inserted, drive the screws until
of the chassis before installing the motherboard. For some chassis models,
12
English
1.5 Installing the power supply unit
Power Factor Correction (PFC) and the other with passive PFC.
Power supply with passive PFC:
Passive PFC requires user to
voltage.
Power supply with active PFC:
the AC input voltage.
area.
ASUS Motherboard installation guide 13
English
1.6 Installing an expansion card
wish to install an expansion card.
3. Screw to secure the card on the slot.
4. Repeat the previous steps to install another expansion card.
after installing the expansion card.
• Refer to the motherboard user guide for the instructions of the expansion
card signal cable connection.
PCI card PCIE x16 card
PCIE x1 card
14
English
1.7 Installing disk drives
1.7.1 PATA optical disk drive
slide the optical disk drive into the
2. Align with the screw holes and
secure the disk drive with screws.
the optical drive. The red stripe on
should match the dimple marking
Pin1 on the optical drive.
4. Connect the 4‑pin power cable to
the optical drive.
5. Attach the audio cable to the
connector on the optical drive.
ASUS Motherboard installation guide 15
English
1.7.2 SATA optical disk drive
slide the optical disk drive into the
2. Align with the screw holes and
secure the disk drive with screws.
3. Orient and plug the SATA cable into
the optical drive. SATA cables are
cable into the connector.
4. Connect the SATA power cable to
the the optical drive.
5. Attach the audio cable to the
connector on the optical drive.
16
English
1.7.3 Floppy disk drive
2. Align with the screw holes and
secure the disk drive with screws.
red stripe on the cable is the pin1
end and should match pin1 on the
the connector at the back of the
ASUS Motherboard installation guide 17
English
1.7.4 PATA hard disk drive
1. Insert the PATA hard disk drive into
2. Align with the screw holes and
secure the disk drive with screws.
3. Orient and connect the signal cable
to the hard disk drive. The red stripe
on the cable is the pin1 end. Match
force the cable into the connector.
4. Connect the 4‑pin power cable to
the connector at the back of the
hard disk drive.
5. Attach the other end of the signal
cable to the corresponding slot on
the motherboard.
18
English
Notes for installing PATA hard disk drive
• The cable connector is color‑
coded. The blue one is for the host
drive.
disk drives, the newer 80‑wire
(right) and the older 40‑wire (left)
cables. For ATA66/100/133 disk
offer a better performance. The
optical drives.
• The cables are designed with pull
drives based on the cable labels.
To prevent damaging the pins, pull
the cable tabs to disconnect the
cable.
have to install the controller driver
different position, one in master
ASUS Motherboard installation guide 19
English
1.7.5 SATA hard disk drive
1. Insert the SATA hard disk drive into
2. Align with the screw holes and
secure the disk drive with screws.
3. Orient and connect the SATA cable
to the hard disk drive. The cable can
4. Connect the SATA power cable to
the connector at the back of the
hard disk drive.
Notes for installing SATA hard disk drive
• Serial ATA (SATA) interface
provides higher data transmission
speed, and better voltage tolerance.
The narrow design of the SATA
cable also solves cabling issues
chassis.
• The SATA power cable connector
is different from the traditional
4‑pin power connector. ASUS
motherboard bundles power adapter
new connector.
This manual suits for next models
6
Table of contents
Languages:
Other Asus Motherboard manuals
Asus
Asus Striker Extreme User manual
Asus
Asus PRIME H610M-4 WIFI User manual
Asus
Asus P5GD1 User manual
Asus
Asus P8B-X User manual
Asus
Asus A7V266-M User manual
Asus
Asus H87M-PLUS User manual
Asus
Asus P5LD2-C IPAT User manual
Asus
Asus PRIME B650M-A WIFI User manual
Asus
Asus H110M-CS User manual
Asus
Asus PRIME B760M-A D4 User manual
Asus
Asus E3M-PLUS V5 User manual
Asus
Asus SABERTOOTH Z97 MARK 2 User manual
Asus
Asus M4N82 Deluxe User manual
Asus
Asus WS C422 DC User manual
Asus
Asus M4A79 DELUXE - Motherboard - ATX User manual
Asus
Asus Z170-K User manual
Asus
Asus P8B-C/4L Technical manual
Asus
Asus F1A75-M LE User manual
Asus
Asus A7V600-F/S User manual
Asus
Asus Z97-K User manual
Popular Motherboard manuals by other brands
Analog Devices
Analog Devices EVAL-ADFS5758SDZ user guide
ASROCK
ASROCK Fatal1ty H87 Performance Series Quick installation guide
VIA Technologies
VIA Technologies K8T890 user manual
Giada
Giada N70E-DR ITX NAS user manual
Texas Instruments
Texas Instruments TLV62080 user guide
Atiosys
Atiosys SMB-750 Technical specifications
