Asus TW510-E2 User manual

Dual AMD OpteronDual AMD Opteron
Dual AMD OpteronDual AMD Opteron
Dual AMD Opteron
™™
™™
™
Pedestal/5UPedestal/5U
Pedestal/5UPedestal/5U
Pedestal/5U
Rackmount ServerRackmount Server
Rackmount ServerRackmount Server
Rackmount Server
Service GuideService Guide
Service GuideService Guide
Service Guide
TW510-E2

iiii
iiii
ii
Copyright © 2005 ASUSTeK COMPUTER INC. All Rights Reserved.Copyright © 2005 ASUSTeK COMPUTER INC. All Rights Reserved.
Copyright © 2005 ASUSTeK COMPUTER INC. All Rights Reserved.Copyright © 2005 ASUSTeK COMPUTER INC. All Rights Reserved.
Copyright © 2005 ASUSTeK COMPUTER INC. All Rights Reserved.
No part of this manual, including the products and software described in it, may be reproduced,
transmitted, transcribed, stored in a retrieval system, or translated into any language in any form
or by any means, except documentation kept by the purchaser for backup purposes, without the
express written permission of ASUSTeK COMPUTER INC. (“ASUS”).
ASUS provides this manual “as is” without warranty of any kind, either express or implied,
including but not limited to the implied warranties or conditions of merchantability or fitness for
a particular purpose. In no event shall ASUS, its directors, officers, employees, or agents be liable
for any indirect, special, incidental, or consequential damages (including damages for loss of
profits, loss of business, loss of use or data, interruption of business and the like), even if ASUS
has been advised of the possibility of such damages arising from any defect or error in this
manual or product.
Specifications and information contained in this manual ae furnished for informational use only,
and are subject to change at any time without notice, and should not be construed as a
commitment by ASUS. ASUS assumes no responsibility or liability for any errors or inaccuracies
that may appear in this manual, including the products and software described in it.
Product warranty or service will not be extended if: (1) the product is repaired, modified or
altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the
serial number of the product is defaced or missing.
Products and corporate names appearing in this manual may or may not be registered
trademarks or copyrights of their respective companies, and are used only for identification or
explanation and to the owners’ benefit, without intent to infringe.
E1976E1976
E1976E1976
E1976
First edition V1First edition V1
First edition V1First edition V1
First edition V1
May 2005May 2005
May 2005May 2005
May 2005

iiiiii
iiiiii
iii
Contents
Notices ............................................................................................... vii
Safety information ............................................................................ viii
About this guide ................................................................................. ix
Chapter 1: Product introductionChapter 1: Product introduction
Chapter 1: Product introductionChapter 1: Product introduction
Chapter 1: Product introduction
1.1 System package contents .................................................... 1-2
1.2 System specifications .......................................................... 1-3
1.2 System specifications .......................................................... 1-4
1.3 Front panel features ............................................................. 1-5
1.4 Rear panel features .............................................................. 1-6
1.5 Internal features ................................................................... 1-7
1.6 LED information .................................................................... 1-8
Chapter 2: Hardware setupChapter 2: Hardware setup
Chapter 2: Hardware setupChapter 2: Hardware setup
Chapter 2: Hardware setup
2.1 Chassis cover ....................................................................... 2-2
2.1.1 Removing the side cover ........................................ 2-2
2.1.2 Reinstalling the side cover ...................................... 2-3
2.2 Motherboard information ...................................................... 2-4
2.3 Central Processing Unit (CPU) .............................................. 2-5
2.3.1 Overview ................................................................. 2-5
2.3.2 Installing the CPU.................................................... 2-5
2.3.3 Installing the heatsink and fan ................................ 2-7
2.4 System memory ................................................................... 2-9
2.4.1 Overview ................................................................. 2-9
2.4.2 Memory Configurations ......................................... 2-10
2.4.3 Installing a DIMM ................................................... 2-11
2.4.4 Removing a DIMM ................................................. 2-11
2.5 Front panel assembly ......................................................... 2-12
2.5.1 Removing the front panel assembly ..................... 2-12
2.5.2 Reinstalling the front panel assembly ................... 2-13
2.6 5.25-inch drives ................................................................. 2-14
2.7 Hard disk drives .................................................................. 2-17
2.7.1 Installing a hot-swap SATA HDD ........................... 2-17
2.7.2 Installing an internal SATA HDD ........................... 2-19
2.8 Expansion cards .................................................................. 2-23
2.8.1 Installing an expansion card .................................. 2-23
2.8.2 Removing an expansion card ................................ 2-24

iviv
iviv
iv
Contents
2.9 Cable connections .............................................................. 2-25
2.9.1 Motherboard connections ..................................... 2-25
2.9.2 SATA backplane connections ............................... 2-26
2.10 Removable components ..................................................... 2-29
2.10.1 Chassis fan ........................................................... 2-29
2.10.2 HDD fan ................................................................ 2-31
2.10.3 SATA backplane ................................................... 2-34
2.10.4 Floppy disk drive ................................................... 2-36
2.10.5 Front I/O board .................................................... 2-38
2.10.6 Chassis footpads and roller wheels ...................... 2-40
2.10.7 Power suppy unit .................................................. 2-42
Chapter 3:Chapter 3:
Chapter 3:Chapter 3:
Chapter 3: Installation optionsInstallation options
Installation optionsInstallation options
Installation options
Preparing the system for rack mounting .............................. 3-2
Removing the footpads or roller wheels ............................... 3-2
Removing the top cover ....................................................... 3-2
Attaching the rack rails ........................................................ 3-2
Chapter 4:Chapter 4:
Chapter 4:Chapter 4:
Chapter 4: Motherboard infoMotherboard info
Motherboard infoMotherboard info
Motherboard info
4.1 Motherboard layout .............................................................. 4-2
4.2 Jumpers ................................................................................ 4-4
4.3 Internal connectors .............................................................. 4-7
Chapter 5:Chapter 5:
Chapter 5:Chapter 5:
Chapter 5: BIOS informationBIOS information
BIOS informationBIOS information
BIOS information
5.1 Managing and updating your BIOS ........................................ 5-2
5.1.1 Creating a bootable floppy disk .............................. 5-2
5.1.2 Updating the BIOS .................................................. 5-3
5.1.3 Saving the current BIOS file .................................... 5-5
5.1.4 ASUS CrashFree BIOS 2 utility ................................ 5-6
5.1.5 ASUS EZ Flash utility .............................................. 5-8
5.1.6 ASUS Update utility ................................................ 5-9
5.2 BIOS setup program ........................................................... 5-12
5.2.1 BIOS menu screen ................................................. 5-13
5.2.2 Menu bar ............................................................... 5-13
5.2.3 Legend bar ........................................................... 5-14
5.2.4 Menu items ........................................................... 5-14
5.2.5 Sub-menu items ................................................... 5-14

vv
vv
v
Contents
5.2.6 Configuration fields .............................................. 5-14
5.2.7 Pop-up window ..................................................... 5-15
5.2.8 General help .......................................................... 5-15
5.3 Main menu .......................................................................... 5-16
5.3.1 System Time ......................................................... 5-16
5.3.2 System Date ......................................................... 5-16
5.3.3 Legacy Diskette A ................................................ 5-16
5.3.4 Floppy 3 Mode Support ........................................ 5-16
5.3.5 Base/Extended/Total Memory.............................. 5-16
5.3.6 Primary IDE Master ............................................... 5-17
5.3.7 Primary IDE Slave .................................................. 5-19
5.3.8 Secondary IDE Master ........................................... 5-19
5.3.9 Secondary IDE Slave ............................................. 5-19
5.3.10 Third IDE Master ................................................... 5-20
5.3.11 Fourth IDE Master ................................................. 5-20
5.3.12 IDE Channel 4 Master ............................................ 5-20
5.3.13 IDE Channel 5 Master ............................................ 5-20
5.4 Advanced menu .................................................................. 5-21
5.4.1 CPU Configuration ................................................. 5-21
5.4.2 Memory Configuration .......................................... 5-22
5.4.3 Chipset ................................................................. 5-24
5.4.4 Onboard Device .................................................... 5-26
5.4.5 PCIPnP ................................................................... 5-30
5.4.6 USB Configuration ................................................. 5-32
5.5 Power menu ........................................................................ 5-33
Chapter 6:Chapter 6:
Chapter 6:Chapter 6:
Chapter 6: Driver installationDriver installation
Driver installationDriver installation
Driver installation
6.1 RAID configurations .............................................................. 6-2
6.1.1 Installing hard disks ................................................ 6-3
6.1.2 RAID configuration utility........................................ 6-3
6.1.3 NVIDIA
®
RAID configurations .................................. 6-4
6.2 Creating a RAID driver disk ................................................. 6-11
6.3 LAN driver installation ........................................................ 6-13
6.4 Support CD information ...................................................... 6-14
6.4.1 Running the support CD ....................................... 6-14
6.4.2 Drivers menu ........................................................ 6-15

vivi
vivi
vi
Contents
6.4.3 Management Software .......................................... 6-16
6.4.4 Utilities ................................................................. 6-16
6.5 Software information ......................................................... 6-18
6.5.1 Realtek Audio Control Panel ................................. 6-18
6.5.2 ASUS POST Reporter™ .......................................... 6-25
6.5.3 Winbond Voice Editor ........................................... 6-27
Appendix:Appendix:
Appendix:Appendix:
Appendix: Reference informationReference information
Reference informationReference information
Reference information
A.1 600 W single power supply .................................................. A-2
A.1.1 General description ................................................. A-2
A.1.2 Specifications ......................................................... A-3
A.2 Simple fixes .......................................................................... A-4

viivii
viivii
vii
Notices
Federal Communications Commission StatementFederal Communications Commission Statement
Federal Communications Commission StatementFederal Communications Commission Statement
Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
• This device may not cause harmful interference, and
• This device must accept any interference received including interference
that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with
manufacturer’s instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Canadian Department of Communications StatementCanadian Department of Communications Statement
Canadian Department of Communications StatementCanadian Department of Communications Statement
Canadian Department of Communications Statement
This digital apparatus does not exceed the Class B limits for radio noise
emissions from digital apparatus set out in the Radio Interference
Regulations of the Canadian Department of Communications.
This class B digital apparatus complies with Canadian ICES-003.This class B digital apparatus complies with Canadian ICES-003.
This class B digital apparatus complies with Canadian ICES-003.This class B digital apparatus complies with Canadian ICES-003.
This class B digital apparatus complies with Canadian ICES-003.
WARNING!WARNING!
WARNING!WARNING!
WARNING! The use of shielded cables for connection of the monitor to
the graphics card is required to assure compliance with FCC regulations.
Changes or modifications to this unit not expressly approved by the
party responsible for compliance could void the user’s authority to
operate this equipment.

viiiviii
viiiviii
viii
Safety information
Electrical safetyElectrical safety
Electrical safetyElectrical safety
Electrical safety
• Before installing or removing signal cables, ensure that the power cables
for the system unit and all attached devices are unplugged.
• To prevent electrical shock hazard, disconnect the power cable from the
electrical outlet before relocating the system.
• When adding or removing any additional devices to or from the system,
ensure that the power cables for the devices are unplugged before the
signal cables are connected. If possible, disconnect all power cables from
the existing system before you add a device.
• If the power supply is broken, do not try to fix it by yourself. Contact a
qualified service technician or your dealer.
Operation safetyOperation safety
Operation safetyOperation safety
Operation safety
• Any mechanical operation on this server must be conducted by certified
or experienced engineers.
• Before operating the server, carefully read all the manuals included with
the server package.
• Before using the server, make sure all cables are correctly connected and
the power cables are not damaged. If any damage is detected, contact
your dealer as soon as possible.
• To avoid short circuits, keep paper clips, screws, and staples away from
connectors, slots, sockets and circuitry.
• Avoid dust, humidity, and temperature extremes. Place the server on a
stable surface.
Lithium-Ion Battery WarningLithium-Ion Battery Warning
Lithium-Ion Battery WarningLithium-Ion Battery Warning
Lithium-Ion Battery Warning
CAUTION!CAUTION!
CAUTION!CAUTION!
CAUTION! Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type recommended by the
manufacturer. Dispose of used batteries according to the
manufacturer’s instructions.
CD-ROM Drive Safety WarningCD-ROM Drive Safety Warning
CD-ROM Drive Safety WarningCD-ROM Drive Safety Warning
CD-ROM Drive Safety Warning
CLASS 1 LASER PRODUCTCLASS 1 LASER PRODUCT
CLASS 1 LASER PRODUCTCLASS 1 LASER PRODUCT
CLASS 1 LASER PRODUCT
Heavy SystemHeavy System
Heavy SystemHeavy System
Heavy System
CAUTION!CAUTION!
CAUTION!CAUTION!
CAUTION! This server system is heavy. Ask for assistance when
moving or carrying the system.
S/PDIF Safety WarningS/PDIF Safety Warning
S/PDIF Safety WarningS/PDIF Safety Warning
S/PDIF Safety Warning
CLASS 1 LED PRODUCTCLASS 1 LED PRODUCT
CLASS 1 LED PRODUCTCLASS 1 LED PRODUCT
CLASS 1 LED PRODUCT
This product is equipped with a three-wire power cable and plug for the
user’s safety. Use the power cable with a properly grounded electrical
outlet to avoid electrical shock.

ixix
ixix
ix
About this guide
AudienceAudience
AudienceAudience
Audience
This user guide is intended for system integrators and experienced users
with at least basic knowledge of configuring a server.
ContentsContents
ContentsContents
Contents
This guide contains the following parts:
1.1.
1.1.
1. Chapter 1: Product IntroductionChapter 1: Product Introduction
Chapter 1: Product IntroductionChapter 1: Product Introduction
Chapter 1: Product Introduction
This chapter describes the general features of the barebone server,
including sections on the front panel and rear panel specifications.
2.2.
2.2.
2. Chapter 2: Hardware setupChapter 2: Hardware setup
Chapter 2: Hardware setupChapter 2: Hardware setup
Chapter 2: Hardware setup
This chapter lists the hardware setup procedures that you have to
perform when installing or removing system components.
3.3.
3.3.
3. Chapter 3: Installation optionsChapter 3: Installation options
Chapter 3: Installation optionsChapter 3: Installation options
Chapter 3: Installation options
This chapter describes how to prepare the barebone server for rack
mounting.
4.4.
4.4.
4. Chapter 4: Motherboard informationChapter 4: Motherboard information
Chapter 4: Motherboard informationChapter 4: Motherboard information
Chapter 4: Motherboard information
This chapter gives information about the motherboard that comes
with the server. This chapter includes the motherboard layout, jumper
settings, and connector locations.
5.5.
5.5.
5. Chapter 5: BIOS informationChapter 5: BIOS information
Chapter 5: BIOS informationChapter 5: BIOS information
Chapter 5: BIOS information
This chapter tells how to change the system settings through the
BIOS Setup menus. Detailed descriptions of the BIOS parameters are
also provided.
6.6.
6.6.
6. Chapter 6: Driver installationChapter 6: Driver installation
Chapter 6: Driver installationChapter 6: Driver installation
Chapter 6: Driver installation
This chapter provides information on how to create a RAID set and
how to install the drivers for system components. This chapter also
describes the software applications that the barebone server
supports.
7.7.
7.7.
7. Appendix: Reference informationAppendix: Reference information
Appendix: Reference informationAppendix: Reference information
Appendix: Reference information
This appendix contains the power supply specifications and provides a
troubleshooting guide for solving common problems when using the
barebone server.

xx
xx
x
ReferenceReference
ReferenceReference
Reference
Visit the ASUS websites worldwide that provide updated information for all
ASUS hardware and software products. Refer to the ASUS contact
information for details.
WARNING:WARNING:
WARNING:WARNING:
WARNING: Information to prevent injury to yourself when trying
to complete a task.
CAUTION:CAUTION:
CAUTION:CAUTION:
CAUTION: Information to prevent damage to the components
when trying to complete a task.
IMPORTANT:IMPORTANT:
IMPORTANT:IMPORTANT:
IMPORTANT: Instructions that you MUST follow to complete a
task.
NOTE:NOTE:
NOTE:NOTE:
NOTE: Tips and information to aid in completing a task.
ConventionsConventions
ConventionsConventions
Conventions
To make sure that you perform certain tasks properly, take note of the
following symbols used throughout this manual.

1-1
ASUS TW510-E2ASUS TW510-E2
ASUS TW510-E2ASUS TW510-E2
ASUS TW510-E2
This chapter describes the general
features of the barebone server,
including sections on the front
panel and rear panel specifications.
Chapter 1
Product introduction

Chapter 1: Product introductionChapter 1: Product introduction
Chapter 1: Product introductionChapter 1: Product introduction
Chapter 1: Product introduction
1-21-2
1-21-2
1-2
1.1 System package contents
Check your system package for the following items.
ChassisChassis
ChassisChassis
Chassis ASUS AK25 5U rackmount chassis
MotherboardMotherboard
MotherboardMotherboard
Motherboard ASUS K8N-DL motherboard
ComponentsComponents
ComponentsComponents
Components 600 W single power supply
SATA backplane board
Front I/O board
52x CD-ROM or DVD-ROM drive
Floppy disk drive
Chassis fan
HDD fan
CPU fan and heatsink assembly (x 2)
CablesCables
CablesCables
Cables AC power cable
SATA signal cable
SATA power cable
SMBus cable
AccessoriesAccessories
AccessoriesAccessories
Accessories Hot-swap HDD trays (including HDD screws)
Internal HDD rails (4 pairs)
Chassis roller wheels (4 sets)
System screws and cables
Dummy covers
System keys (2 pcs.)
Application CDsApplication CDs
Application CDsApplication CDs
Application CDs TW510-E2 support CD with ASWM*
Computer Associates
®
eTrust
™
anti-virus CD
DocumentationDocumentation
DocumentationDocumentation
Documentation ASUS TW510-E2 user guide
ASUS ASWM 2.0 user guide
Optional itemsOptional items
Optional itemsOptional items
Optional items ASUS AK25 rackmount rail kit
*ASUS System Web-based Management
If any of the above items is damaged or missing, contact your retailer.

ASUS TW510-E2ASUS TW510-E2
ASUS TW510-E2ASUS TW510-E2
ASUS TW510-E2 1-31-3
1-31-3
1-3
1.2 System specifications
The ASUS TW510-E2 is a barebone server system featuring the ASUS
K8N-DL motherboard. The server supports dual AMD Opteron™ processors
in 940-pin sockets, and includes the latest technologies through the
chipsets embedded on the motherboard.
ChassisChassis
ChassisChassis
Chassis
SystemSystem
SystemSystem
System
dimensiondimension
dimensiondimension
dimension
MotherboardMotherboard
MotherboardMotherboard
Motherboard
CPUCPU
CPUCPU
CPU
ChipsetChipset
ChipsetChipset
Chipset
MemoryMemory
MemoryMemory
Memory
Storage andStorage and
Storage andStorage and
Storage and
RAIDRAID
RAIDRAID
RAID
LANLAN
LANLAN
LAN
AudioAudio
AudioAudio
Audio
IEEE 1394IEEE 1394
IEEE 1394IEEE 1394
IEEE 1394
USBUSB
USBUSB
USB
ExpansionExpansion
ExpansionExpansion
Expansion
slotsslots
slotsslots
slots
Drive baysDrive bays
Drive baysDrive bays
Drive bays
Pedestal or rackmount 5U with removable front door bezel
and chassis foot stand or roller-wheels.
431 mm (H) x 220 mm (W) x 510 mm (D)
ASUS K8N-DL (ATX compatible form factor: 12 in x 10.5 in)
Dual Socket 940 for AMD Opteron™ 64 processors
Supports AMD 64 architecture that enables simultaneous
32-bit and 64-bit computing
NVIDIA
®
CK8-04 Professional
Dual-channel memory architecture
6 x 184-pin DIMM sockets support registered ECC
400/333/266 MHz DDR memory modules
Supports up to 24 GB system memory
(tested only up to 12 GB on this motherboard due to
4 GB DDR availability)
NVIDIA
®
CK8-04 Professional chipset supports:
- 2 x Ultra DMA 100/66/33
- 4 x SATA-II 3Gb/s drives
- RAID 0, RAID 1, RAID 0+1, JBOD configurations
BROADCOM
®
BMC5751 Gigabit PCI-E LAN controller
Realtek
®
ALC850 8-channel CODEC
Supports Universal Audio Jack (UAJ
®
) Technology
Supports Audio Sensing and Enumeration Technology
1 x Coaxial S/PDIF Out port
1 x Optical S/PDIF Out port
TI 1394a controller supports one IEEE 1394 port
4 x USB 2.0 ports (on the rear panel)
1 x PCI Express x16 slot
1 x PCI Express x1 slot
2 x PCI slots
1 x 3.25-inch FDD bay
3 x 5.25-inch drive bays
(continued on the next page)

Chapter 1: Product introductionChapter 1: Product introduction
Chapter 1: Product introductionChapter 1: Product introduction
Chapter 1: Product introduction
1-41-4
1-41-4
1-4
1.2 System specifications
Front panelFront panel
Front panelFront panel
Front panel
Rear panelRear panel
Rear panelRear panel
Rear panel
ManagementManagement
ManagementManagement
Management
HardwareHardware
HardwareHardware
Hardware
monitorsmonitors
monitorsmonitors
monitors
Supported OSSupported OS
Supported OSSupported OS
Supported OS
Power supplyPower supply
Power supplyPower supply
Power supply
4 x USB ports
1 x IEEE 1394 port
1 x Headphone port (Line Out)
1 x Microphone port (Line In)
1 x Parallel port
1 x Serial port (COM1)
1 x IEEE 1394 port
1 x LAN (RJ-45) port
4 x USB 2.0 ports
1 x Optical S/PDIF out port
1 x Coaxial S/PDIF out port
1 x PS/2 keyboard port
1 x PS/2 mouse port
8-channel audio ports
ASUS Server Web-based Management (ASWM) 2.0
Voltage, temperature, CPU and memory utilization, and fan
speed monitoring
Automatic Server Restart (ASR) feature
Windows
®
2000 Professional (Service Pack 4)
Windows
®
XP Professional (Service Pack 2)
600 W power supply
(with 24-pin and 8-pin power plugs)
Refer to “Chapter 4 Motherboard information” for details on the internal
connectors.

ASUS TW510-E2ASUS TW510-E2
ASUS TW510-E2ASUS TW510-E2
ASUS TW510-E2 1-51-5
1-51-5
1-5
1.3 Front panel features
The TW510-E2 chassis displays a stylish front bezel with lock. The bezel
covers the system components on the front panel and serves as security.
Open the bezel to access the front panel components.
The drive bays, power and reset buttons, LED indicators, optical drive,
floppy drive, USB 2.0 ports, audio I/O ports, and an IEEE 1394 port are
located on the front panel. For future installation of 5.25-inch devices, two
drive bays are available.
CC
CC
CD-ROM driveD-ROM drive
D-ROM driveD-ROM drive
D-ROM drive
SecuritySecurity
SecuritySecurity
Security
locklock
locklock
lock Hot-swap HDD baysHot-swap HDD bays
Hot-swap HDD baysHot-swap HDD bays
Hot-swap HDD bays
USB 2.0 portsUSB 2.0 ports
USB 2.0 portsUSB 2.0 ports
USB 2.0 ports
To access front I/O ports and floppy disk drive without opening the bezel, hold
the tab and move the sliding panel (rightmost panel) to the left as shown.
Empty 5.25-inch baysEmpty 5.25-inch bays
Empty 5.25-inch baysEmpty 5.25-inch bays
Empty 5.25-inch bays
Power buttonPower button
Power buttonPower button
Power button
Reset buttonReset button
Reset buttonReset button
Reset button
Message LEDMessage LED
Message LEDMessage LED
Message LED
HDD access LEDHDD access LED
HDD access LEDHDD access LED
HDD access LED
Power LEDPower LED
Power LEDPower LED
Power LED
Floppy driveFloppy drive
Floppy driveFloppy drive
Floppy drive
IEEE 1394 portIEEE 1394 port
IEEE 1394 portIEEE 1394 port
IEEE 1394 port
MIC (Line In) portMIC (Line In) port
MIC (Line In) portMIC (Line In) port
MIC (Line In) port
Headphone (Line Out) portHeadphone (Line Out) port
Headphone (Line Out) portHeadphone (Line Out) port
Headphone (Line Out) port

Chapter 1: Product introductionChapter 1: Product introduction
Chapter 1: Product introductionChapter 1: Product introduction
Chapter 1: Product introduction
1-61-6
1-61-6
1-6
1.4 Rear panel features
The rear panel includes a slot for the motherboard rear I/O ports,
expansion slots, a chassis lock and intrusion switch, a vent for the system
fan, and power supply module.
Rear panel I/O portsRear panel I/O ports
Rear panel I/O portsRear panel I/O ports
Rear panel I/O ports
PS/2 mouse portPS/2 mouse port
PS/2 mouse portPS/2 mouse port
PS/2 mouse port
USB portsUSB ports
USB portsUSB ports
USB ports
PS/2 keyboard portPS/2 keyboard port
PS/2 keyboard portPS/2 keyboard port
PS/2 keyboard port
Parallel portParallel port
Parallel portParallel port
Parallel port
IEEE 1394 portIEEE 1394 port
IEEE 1394 portIEEE 1394 port
IEEE 1394 port
LAN portLAN port
LAN portLAN port
LAN port
Serial portSerial port
Serial portSerial port
Serial port
Rear Speaker Out portRear Speaker Out port
Rear Speaker Out portRear Speaker Out port
Rear Speaker Out port
Line In portLine In port
Line In portLine In port
Line In port
Coaxial S/PDIF Out portCoaxial S/PDIF Out port
Coaxial S/PDIF Out portCoaxial S/PDIF Out port
Coaxial S/PDIF Out port
Optical S/PDIF Out portOptical S/PDIF Out port
Optical S/PDIF Out portOptical S/PDIF Out port
Optical S/PDIF Out port
Center/Subwoofer portCenter/Subwoofer port
Center/Subwoofer portCenter/Subwoofer port
Center/Subwoofer port
Microphone portMicrophone port
Microphone portMicrophone port
Microphone port
Line Out portLine Out port
Line Out portLine Out port
Line Out port Side Speaker Out portSide Speaker Out port
Side Speaker Out portSide Speaker Out port
Side Speaker Out port
PoPo
PoPo
Po
wer connectorwer connector
wer connectorwer connector
wer connector
Chassis cover lockChassis cover lock
Chassis cover lockChassis cover lock
Chassis cover lock
Expansion slotsExpansion slots
Expansion slotsExpansion slots
Expansion slots
Power supply modulePower supply module
Power supply modulePower supply module
Power supply module
12 cm system fan12 cm system fan
12 cm system fan12 cm system fan
12 cm system fan
Chassis intrusion switchChassis intrusion switch
Chassis intrusion switchChassis intrusion switch
Chassis intrusion switch
Rear panel I/O portsRear panel I/O ports
Rear panel I/O portsRear panel I/O ports
Rear panel I/O ports
(Refer to the description below.)

ASUS TW510-E2ASUS TW510-E2
ASUS TW510-E2ASUS TW510-E2
ASUS TW510-E2 1-71-7
1-71-7
1-7
1.5 Internal features
The barebone server system includes the basic components as shown.
1. Power supply cage
2. Chassis fan
3. K8N-DL motherboard
4. Chassis intrusion switch
5. Expansion card locks
6. Optical drive
7. 2 x 5.25-inch drive bays
8. Hard disk drive cage
9. Front I/O board
10. HDD fan (inside)
11. SATA backplane (hidden)
11
11
1
22
22
2
33
33
3
44
44
4
55
55
5
66
66
6
77
77
7
88
88
8
99
99
9
1010
1010
10
1111
1111
11

Chapter 1: Product introductionChapter 1: Product introduction
Chapter 1: Product introductionChapter 1: Product introduction
Chapter 1: Product introduction
1-81-8
1-81-8
1-8
1.6 LED information
The barebone server system comes with five LED indicators. Refer to the
following table for the LED status description.
LEDLED
LEDLED
LED IconIcon
IconIcon
Icon Display statusDisplay status
Display statusDisplay status
Display status DescriptionDescription
DescriptionDescription
Description
SystemSystem
SystemSystem
System
Power LED ON System power ON
Blinking System is in suspend mode
HDD Access LED OFF No activity
Blinking Read/write data into the HDD
Message LED OFF System is normal; no incoming event
Blinking ASMS indicates a HW monitor event
HDD baysHDD bays
HDD baysHDD bays
HDD bays
Drive Status LED Green Bridge board connected to backplane
Installed HDD is in good condition
Red HDD failure
Drive Activity LED Blinking Read/write data into the HDD
!
Power LED (green)Power LED (green)
Power LED (green)Power LED (green)
Power LED (green)
HDD Access LED (green)HDD Access LED (green)
HDD Access LED (green)HDD Access LED (green)
HDD Access LED (green)
Message LED (red)Message LED (red)
Message LED (red)Message LED (red)
Message LED (red)
Drive Status LED (green/red)Drive Status LED (green/red)
Drive Status LED (green/red)Drive Status LED (green/red)
Drive Status LED (green/red)
Drive Activity LED (green)Drive Activity LED (green)
Drive Activity LED (green)Drive Activity LED (green)
Drive Activity LED (green)
!
The Power, HDD Access, and Message LEDs are visible even if the
system front bezel is closed.

ASUS TW510-E2ASUS TW510-E2
ASUS TW510-E2ASUS TW510-E2
ASUS TW510-E2
2-1
This chapter lists the hardware
setup procedures that you have to
perform when installing or removing
system components.
Chapter 2
Hardware setup

Chapter 2: Hardware setupChapter 2: Hardware setup
Chapter 2: Hardware setupChapter 2: Hardware setup
Chapter 2: Hardware setup
2-22-2
2-22-2
2-2
2.1 Chassis cover
The chassis features a “screwless design” that allows convenient assembly
and disassembly. You can simply push or slide mechanical bolts and locks to
remove the cover.
2. Slide the side cover for about half an inch toward the rear until it is
disengaged from the chassis.
11
11
1
3. Set the side cover aside.
• Make sure that you unplug the power cord before removing the side cover.
• Take extra care when removing the side cover. Keep your fingers
from components inside the chassis that can cause injury, such as
the CPU/chassis fan and other sharp-edged parts.
2.1.12.1.1
2.1.12.1.1
2.1.1 Removing the side coverRemoving the side cover
Removing the side coverRemoving the side cover
Removing the side cover
1. Push up the chassis lock on the rear
panel to release the side cover.