Asus TS100-E3 User manual

IntelIntel
IntelIntel
Intel
®®
®®
®
PentiumPentium
PentiumPentium
Pentium
®®
®®
®
4/Pentium4/Pentium
4/Pentium4/Pentium
4/Pentium
®®
®®
®
D LGA775D LGA775
D LGA775D LGA775
D LGA775
PedestalPedestal
PedestalPedestal
Pedestal ServerServer
ServerServer
Server
1066/800 MHz Front Side Bus
TS100-E3

iiii
iiii
ii
Copyright © 2006 ASUSTeK COMPUTER INC. All Rights Reserved.Copyright © 2006 ASUSTeK COMPUTER INC. All Rights Reserved.
Copyright © 2006 ASUSTeK COMPUTER INC. All Rights Reserved.Copyright © 2006 ASUSTeK COMPUTER INC. All Rights Reserved.
Copyright © 2006 ASUSTeK COMPUTER INC. All Rights Reserved.
No part of this manual, including the products and software described in it, may be reproduced,
transmitted, transcribed, stored in a retrieval system, or translated into any language in any form
or by any means, except documentation kept by the purchaser for backup purposes, without the
express written permission of ASUSTeK COMPUTER INC. (“ASUS”).
ASUS provides this manual “as is” without warranty of any kind, either express or implied,
including but not limited to the implied warranties or conditions of merchantability or fitness for
a particular purpose. In no event shall ASUS, its directors, officers, employees, or agents be liable
for any indirect, special, incidental, or consequential damages (including damages for loss of
profits, loss of business, loss of use or data, interruption of business and the like), even if ASUS
has been advised of the possibility of such damages arising from any defect or error in this
manual or product.
Specifications and information contained in this manual ae furnished for informational use only,
and are subject to change at any time without notice, and should not be construed as a
commitment by ASUS. ASUS assumes no responsibility or liability for any errors or inaccuracies
that may appear in this manual, including the products and software described in it.
Product warranty or service will not be extended if: (1) the product is repaired, modified or
altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the
serial number of the product is defaced or missing.
Products and corporate names appearing in this manual may or may not be registered
trademarks or copyrights of their respective companies, and are used only for identification or
explanation and to the owners’ benefit, without intent to infringe.
E2355E2355
E2355E2355
E2355
First Edition V1First Edition V1
First Edition V1First Edition V1
First Edition V1
January 2006January 2006
January 2006January 2006
January 2006

iiiiii
iiiiii
iii
Contents
Notices ............................................................................................... vii
Safety information ............................................................................ viii
About this guide ................................................................................. ix
Chapter 1: Product introductionChapter 1: Product introduction
Chapter 1: Product introductionChapter 1: Product introduction
Chapter 1: Product introduction
1.1 System package contents .................................................... 1-2
1.2 System specifications .......................................................... 1-3
1.3 Front panel features ............................................................. 1-5
1.4 Rear panel features .............................................................. 1-6
1.5 Internal features ................................................................... 1-7
1.6 LED information .................................................................... 1-8
Chapter 2: Hardware setupChapter 2: Hardware setup
Chapter 2: Hardware setupChapter 2: Hardware setup
Chapter 2: Hardware setup
2.1 Chassis cover ....................................................................... 2-2
2.1.1 Removing the side cover ........................................ 2-2
2.1.2 Reinstalling the side cover ...................................... 2-3
2.2 Motherboard overview .......................................................... 2-4
2.3 Central Processing Unit (CPU) .............................................. 2-5
2.3.1 Installing the CPU.................................................... 2-5
2.3.2 Installing the CPU heatsink and airduct assembly .. 2-8
2.4 System memory ................................................................. 2-10
2.4.1 Overview ............................................................... 2-10
2.4.2 Memory configurations ......................................... 2-10
2.4.3 Installing a DIMM ................................................... 2-11
2.4.4 Removing a DIMM ................................................. 2-11
2.5 Expansion slots ................................................................... 2-12
2.5.1 Installing an expansion card ................................. 2-12
2.5.2 Configuring an expansion card ............................. 2-12
2.5.3 Interrupt assignments .......................................... 2-13
2.5.4 PCI Express slot .................................................... 2-14
2.5.5 PCI slots ............................................................... 2-14
2.6 Front panel assembly ......................................................... 2-15
2.6.1 Removing the front panel assembly ..................... 2-15
2.6.2 Reinstalling the front panel assembly ................... 2-17
2.7 5.25-inch drives ................................................................. 2-18

iviv
iviv
iv
Contents
2.8 Hard disk drives .................................................................. 2-21
2.8.1 Removing a SATA HDD ......................................... 2-21
2.8.2 Installing a SATA HDD .......................................... 2-22
2.9 Expansion cards .................................................................. 2-23
2.9.1 Installing an expansion card .................................. 2-23
2.9.2 Removing an expansion card ................................ 2-25
2.10 Cable connections .............................................................. 2-26
2.10.1 Motherboard connections ..................................... 2-26
2.11 Removable components ..................................................... 2-27
2.11.1 Chassis fan ........................................................... 2-27
2.11.2 Floppy disk drive ................................................... 2-29
2.11.3 Front I/O board .................................................... 2-31
2.11.4 Power supply unit ................................................. 2-33
Chapter 3:Chapter 3:
Chapter 3:Chapter 3:
Chapter 3: Motherboard infoMotherboard info
Motherboard infoMotherboard info
Motherboard info
3.1 Motherboard layouts ............................................................ 3-2
3.2 Jumpers ................................................................................ 3-4
3.3 Connectors ........................................................................... 3-9
3.3.1 Rear panel connectors ........................................... 3-9
3.3.2 Internal connectors ............................................. 3-10
Chapter 4:Chapter 4:
Chapter 4:Chapter 4:
Chapter 4: BIOS informationBIOS information
BIOS informationBIOS information
BIOS information
4.1 Managing and updating your BIOS ........................................ 4-2
4.1.1 Creating a bootable floppy disk .............................. 4-2
4.1.2 AFUDOS utility ........................................................ 4-3
4.1.3 ASUS CrashFree BIOS 2 utility ................................ 4-5
4.1.4 ASUS Update utility ................................................ 4-7
4.2 BIOS setup program ........................................................... 4-10
4.2.1 BIOS menu screen ................................................. 4-11
4.2.2 Menu bar ............................................................... 4-11
4.2.3 Navigation keys .................................................... 4-11
4.2.4 Menu items ........................................................... 4-12
4.2.5 Sub-menu items ................................................... 4-12
4.2.6 Configuration fields .............................................. 4-12
4.2.7 Pop-up window ..................................................... 4-12
4.2.8 Scroll bar .............................................................. 4-12
4.2.9 General help .......................................................... 4-12

vv
vv
v
Contents
4.3 Main menu .......................................................................... 4-13
4.3.1 System Time ......................................................... 4-13
4.3.2 System Date ......................................................... 4-13
4.3.3 Legacy Diskette A ................................................ 4-13
4.3.4 Primary/Secondary/Third IDE Master/Slave ......... 4-14
4.3.5 IDE Configuration .................................................. 4-15
4.3.6 System Information .............................................. 4-17
4.4 Advanced menu .................................................................. 4-18
4.4.1 USB Configuration ................................................. 4-18
4.4.2 MPS Configuration ................................................ 4-19
4.4.3 Remote Access Configuration .............................. 4-20
4.4.4 CPU Configuration ................................................. 4-21
4.4.5 Chipset Configuration ........................................... 4-23
4.4.6 Onboard Devices Configuration ............................ 4-24
4.4.7 PCI/PnP Configuration .......................................... 4-25
4.5 Power menu ........................................................................ 4-26
4.5.1 APM Configuration ................................................ 4-26
4.5.2 Hardware Monitor ................................................. 4-28
4.6 Boot menu .......................................................................... 4-30
4.6.1 Boot Device Priority .............................................. 4-30
4.6.2 Boot Settings Configuration ................................. 4-31
4.6.3 Security ................................................................ 4-33
4.7 Exit menu ........................................................................... 4-35
Chapter 5:Chapter 5:
Chapter 5:Chapter 5:
Chapter 5: RAID ConfigurationRAID Configuration
RAID ConfigurationRAID Configuration
RAID Configuration
5.1 Setting up RAID .................................................................... 5-2
5.1.1 RAID definitions ...................................................... 5-2
5.1.2 Installing hard disk drives ....................................... 5-3
5.1.3 Setting the RAID item in BIOS ................................ 5-3
5.1.4 RAID configuration utilities ..................................... 5-3
5.2 LSI Logic Embedded SATA RAID Setup Utility ...................... 5-4
5.2.1 Creating a RAID 0 or RAID 1 set ............................. 5-5
5.2.2 Adding or viewing a RAID configuration ............... 5-10
5.2.3 Initializing the logical drives .................................. 5-13
5.2.4 Rebuilding failed drives ......................................... 5-18
5.2.5 Checking the drives for data consistency ............ 5-20

vivi
vivi
vi
Contents
5.2.6 Deleting a RAID configuration ............................... 5-23
6.2.7 Selecting the boot drive from a RAID set ............. 5-24
6.2.8 Enabling the WriteCache ...................................... 5-25
5.3 Global Array Manager ......................................................... 5-25
Chapter 6:Chapter 6:
Chapter 6:Chapter 6:
Chapter 6: Driver installationDriver installation
Driver installationDriver installation
Driver installation
6.1 RAID driver installation ......................................................... 6-2
6.1.1 Creating a RAID driver disk ..................................... 6-2
6.1.2 Installing the RAID controller driver ........................ 6-3
6.2 LAN driver installation ........................................................ 6-12
6.2.1 Windows
®
2000/2003 Server .............................. 6-12
6.2.2 Red Hat
®
Enterprise ver. 3.0 ................................ 6-13
6.3 Management applications and utilities installation ............. 6-15
6.3.1 Running the support CD ....................................... 6-15
6.3.2 Drivers menu ........................................................ 6-15
6.3.3 Management Software menu ................................ 6-16
6.3.4 Utilities menu ........................................................ 6-16
6.3.5 Contact information ............................................. 6-16
Appendix:Appendix:
Appendix:Appendix:
Appendix: Reference informationReference information
Reference informationReference information
Reference information
A.1 350 W single power supply .................................................. A-2
A.1.1 General description ................................................. A-2
A.1.2 Specifications ......................................................... A-3
A.2 Simple fixes .......................................................................... A-4

viivii
viivii
vii
Notices
Federal Communications Commission StatementFederal Communications Commission Statement
Federal Communications Commission StatementFederal Communications Commission Statement
Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
• This device may not cause harmful interference, and
• This device must accept any interference received including interference
that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with
manufacturer’s instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
WARNING!WARNING!
WARNING!WARNING!
WARNING! The use of shielded cables for connection of the monitor to
the graphics card is required to assure compliance with FCC regulations.
Changes or modifications to this unit not expressly approved by the
party responsible for compliance could void the user’s authority to
operate this equipment.
Canadian Department of Communications StatementCanadian Department of Communications Statement
Canadian Department of Communications StatementCanadian Department of Communications Statement
Canadian Department of Communications Statement
This digital apparatus does not exceed the Class B limits for radio noise
emissions from digital apparatus set out in the Radio Interference
Regulations of the Canadian Department of Communications.
This class B digital apparatus complies with Canadian ICES-003.This class B digital apparatus complies with Canadian ICES-003.
This class B digital apparatus complies with Canadian ICES-003.This class B digital apparatus complies with Canadian ICES-003.
This class B digital apparatus complies with Canadian ICES-003.

viiiviii
viiiviii
viii
Safety information
Electrical SafetyElectrical Safety
Electrical SafetyElectrical Safety
Electrical Safety
• Before installing or removing signal cables, ensure that the power cables
for the system unit and all attached devices are unplugged.
• To prevent electrical shock hazard, disconnect the power cable from the
electrical outlet before relocating the system.
• When adding or removing any additional devices to or from the system,
ensure that the power cables for the devices are unplugged before the
signal cables are connected. If possible, disconnect all power cables from
the existing system before you add a device.
• If the power supply is broken, do not try to fix it by yourself. Contact a
qualified service technician or your dealer.
Operation SafetyOperation Safety
Operation SafetyOperation Safety
Operation Safety
• Any mechanical operation on this server must be conducted by certified
or experienced engineers.
• Before operating the server, carefully read all the manuals included with
the server package.
• Before using the server, make sure all cables are correctly connected and
the power cables are not damaged. If any damage is detected, contact
your dealer as soon as possible.
• To avoid short circuits, keep paper clips, screws, and staples away from
connectors, slots, sockets and circuitry.
• Avoid dust, humidity, and temperature extremes. Place the server on a
stable surface.
This product is equipped with a three-wire power cable and plug for the
user’s safety. Use the power cable with a properly grounded electrical
outlet to avoid electrical shock.
Lithium-Ion Battery WarningLithium-Ion Battery Warning
Lithium-Ion Battery WarningLithium-Ion Battery Warning
Lithium-Ion Battery Warning
CAUTION!CAUTION!
CAUTION!CAUTION!
CAUTION! Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type recommended by
the manufacturer. Dispose of used batteries according to the
manufacturer’s instructions.
CD-ROM Drive Safety WarningCD-ROM Drive Safety Warning
CD-ROM Drive Safety WarningCD-ROM Drive Safety Warning
CD-ROM Drive Safety Warning
CLASS 1 LASER PRODUCTCLASS 1 LASER PRODUCT
CLASS 1 LASER PRODUCTCLASS 1 LASER PRODUCT
CLASS 1 LASER PRODUCT
Heavy SystemHeavy System
Heavy SystemHeavy System
Heavy System
CAUTION!CAUTION!
CAUTION!CAUTION!
CAUTION! This server system is heavy. Ask for assistance when
moving or carrying the system.

ixix
ixix
ix
About this guide
AudienceAudience
AudienceAudience
Audience
This user guide is intended for system integrators and experienced users
with at least basic knowledge of configuring a server.
ContentsContents
ContentsContents
Contents
This guide contains the following parts:
1.1.
1.1.
1. Chapter 1: Product IntroductionChapter 1: Product Introduction
Chapter 1: Product IntroductionChapter 1: Product Introduction
Chapter 1: Product Introduction
This chapter describes the general features of the server, including
sections on front panel and rear panel specifications.
2.2.
2.2.
2. Chapter 2: Hardware setupChapter 2: Hardware setup
Chapter 2: Hardware setupChapter 2: Hardware setup
Chapter 2: Hardware setup
This chapter lists the hardware setup procedures that you have to
perform when installing or removing system components.
3.3.
3.3.
3. Chapter 3: Motherboard informationChapter 3: Motherboard information
Chapter 3: Motherboard informationChapter 3: Motherboard information
Chapter 3: Motherboard information
This chapter gives information about the motherboard that comes
with the server. This chapter includes the motherboard layout, jumper
settings, and connector locations.
4.4.
4.4.
4. Chapter 4: BIOS informationChapter 4: BIOS information
Chapter 4: BIOS informationChapter 4: BIOS information
Chapter 4: BIOS information
This chapter tells how to change system settings through the BIOS
Setup menus and describes the BIOS parameters.
5.5.
5.5.
5. Chapter 5: RAID configurationChapter 5: RAID configuration
Chapter 5: RAID configurationChapter 5: RAID configuration
Chapter 5: RAID configuration
This chapter provides information on how toconfigure your hard disk
drives as RAID sets.
6.6.
6.6.
6. Chapter 6: Driver installationChapter 6: Driver installation
Chapter 6: Driver installationChapter 6: Driver installation
Chapter 6: Driver installation
This chapter provides information on how to create a RAID set and
how to install the drivers for system components. This chapter also
describes the software applications that the barebone server
supports.
7.7.
7.7.
7. Appendix: Reference informationAppendix: Reference information
Appendix: Reference informationAppendix: Reference information
Appendix: Reference information
This section provides information about the power supply unit and a
troubleshooting guide for solving common problems when using the
barebone server.

xx
xx
x
ReferenceReference
ReferenceReference
Reference
Visit the ASUS websites worldwide that provide updated information for all
ASUS hardware and software products. Refer to the ASUS contact
information for details.
WARNING:WARNING:
WARNING:WARNING:
WARNING: Information to prevent injury to yourself when trying
to complete a task.
CAUTION:CAUTION:
CAUTION:CAUTION:
CAUTION: Information to prevent damage to the components
when trying to complete a task.
IMPORTANT:IMPORTANT:
IMPORTANT:IMPORTANT:
IMPORTANT: Instructions that you MUST follow to complete a
task.
NOTE:NOTE:
NOTE:NOTE:
NOTE: Tips and information to aid in completing a task.
ConventionsConventions
ConventionsConventions
Conventions
To make sure that you perform certain tasks properly, take note of the
following symbols used throughout this manual.

1-1
ASUS TS100-E3ASUS TS100-E3
ASUS TS100-E3ASUS TS100-E3
ASUS TS100-E3
This chapter describes the general
features of the barebone server,
including sections on the front
panel and rear panel specifications.
Chapter 1
Product introduction

Chapter 1: Product introductionChapter 1: Product introduction
Chapter 1: Product introductionChapter 1: Product introduction
Chapter 1: Product introduction
1-21-2
1-21-2
1-2
1.1 System package contents
Check your ASUS TS100-E3 package with the items on the following table.
The package contents vary for the following configurations:
*ASUS System Web-based Management
Item DescriptionItem Description
Item DescriptionItem Description
Item Description
ASUS TS100-E3 pedestal chassis with:
• ASUS P5MT-MX/C motherboard
• 350 W single power supply
• Floppy disk drive
• 9 cm Blower
• Front I/O board
• CPU Cooler x1
• Dummy covers
Cables
• SATA power cable
• SATA signal cables
• IDE cables
System screws and cables
System keys ( 2 pcs.)
Bundled CDs
• TS100-E3 support CD with ASWM*
• Computer Associates
®
eTrust
™
anti-virus CD
Documentation
• ASUS TS100-E3 user guide
• ASUS ASWM 2.0 user guide
Optional items
• 52x IDE CD-ROM or 16X DVD-ROM drive

ASUS TS100-E3ASUS TS100-E3
ASUS TS100-E3ASUS TS100-E3
ASUS TS100-E3 1-31-3
1-31-3
1-3
1.2 System specifications
The ASUS TS100-E3 is a barebone server system featuring the ASUS P5MT
Series motherboard. The server supports an Intel
®
Pentium
®
4/Pentium
®
D
processor in the 775-land package, and includes the latest technologies
through the chipsets embedded on the motherboard.
ChassisChassis
ChassisChassis
Chassis
MotherboardMotherboard
MotherboardMotherboard
Motherboard
ChipsetChipset
ChipsetChipset
Chipset
ProcessorProcessor
ProcessorProcessor
Processor
Front Side BusFront Side Bus
Front Side BusFront Side Bus
Front Side Bus
MemoryMemory
MemoryMemory
Memory
LANLAN
LANLAN
LAN
StorageStorage
StorageStorage
Storage
ExpansionExpansion
ExpansionExpansion
Expansion
slotsslots
slotsslots
slots
Drive baysDrive bays
Drive baysDrive bays
Drive bays
Front panelFront panel
Front panelFront panel
Front panel
Pedestal with removable front door bezel and chassis foot
stand or roller-wheels.
ASUS P5MT-MX/C
ATX compatible form factor: 9.6 in. x 9.6 in.
Northbridge: Intel
®
E7230 Memory Controller Hub (MCH)
Southbridge: Intel
®
ICH7R
Intel
®
Pentium
®
4/Intel
®
Pentium
®
D processor in the
775-land package with Extended Memory 64-bit
Technology (EM64T)
Supports Dual Core technology
1066/800/533 MHz
Dual-channel memory architecture
4 x 240-pin DIMM sockets support ECC/non-ECC
unbuffered 667/533 MHz DDR2 memory modules
Supports 256 MB up to 8 GB of system memory
Dual Broadcom
®
BCM5721 Gigabit LAN controllers
- PCI Express 1.0a specifications compliant
Intel
®
ICH7R Southbridge supports:
- 2 x Serial ATA 3 Gb/s hard disk drives (Supports up to
2 hard disk drives)
- LSI Logic Embedded SATA RAID controller (RAID 0,
RAID 1)
2 x PCI 33 MHz/32-bit/5V (PCI 2.3)
1 x PCI Express™ x8 slot ( x4 Link)
1 x PCI Express™ x16 slot (x8 Link)*
1 x 3.5-inch FDD bay
2 x 3.5-inch internal drive bays
2 x 5.25-inch drive bays
4 x USB 2.0 ports
(continued on the next page)

Chapter 1: Product introductionChapter 1: Product introduction
Chapter 1: Product introductionChapter 1: Product introduction
Chapter 1: Product introduction
1-41-4
1-41-4
1-4
Rear panelRear panel
Rear panelRear panel
Rear panel
ManagementManagement
ManagementManagement
Management
HardwareHardware
HardwareHardware
Hardware
monitorsmonitors
monitorsmonitors
monitors
Power supplyPower supply
Power supplyPower supply
Power supply
1 x Serial port
1 x Parallel port
1 x PS/2 keyboard port
1 x PS/2 mouse port
1 x LAN (RJ-45) ports
2 x USB 2.0 ports
1 x VGA port
ASUS Server Web-based Management (ASWM) 2.0
Voltage, temperature, CPU and memory utilization, storage
capacity, and fan speed monitoring
Automatic Server Restart (ASR) feature
350 W single power supply
(with 24-pin and 4-pin power plugs)
* If you install a PCI Express VGA card, the link speed downgrades to
x1 due to chipset limitation. This limitation applies only to VGA
cards.

ASUS TS100-E3ASUS TS100-E3
ASUS TS100-E3ASUS TS100-E3
ASUS TS100-E3 1-51-5
1-51-5
1-5
1.3 Front panel features
The TS100-E3 chassis displays a stylish front bezel with lock. The bezel
covers the system components on the front panel and serves as security.
Open the bezel to access the front panel components.
The drive bays, power and reset
buttons, LED indicators, CD-ROM drive,
floppy drive, and USB 2.0 ports are
located on the front panel. For future
installation of 5.25-inch devices, two
drive bays are available.
DVD/CDVD/C
DVD/CDVD/C
DVD/C
D-ROM driveD-ROM drive
D-ROM driveD-ROM drive
D-ROM drive
Empty 3.5-inch bayEmpty 3.5-inch bay
Empty 3.5-inch bayEmpty 3.5-inch bay
Empty 3.5-inch bay
USB 2.0 portsUSB 2.0 ports
USB 2.0 portsUSB 2.0 ports
USB 2.0 ports
Empty 5.25-inch bayEmpty 5.25-inch bay
Empty 5.25-inch bayEmpty 5.25-inch bay
Empty 5.25-inch bay
Power buttonPower button
Power buttonPower button
Power button
Reset buttonReset button
Reset buttonReset button
Reset button
HDD access LEDHDD access LED
HDD access LEDHDD access LED
HDD access LED
Power LEDPower LED
Power LEDPower LED
Power LED
Floppy disk driveFloppy disk drive
Floppy disk driveFloppy disk drive
Floppy disk drive

Chapter 1: Product introductionChapter 1: Product introduction
Chapter 1: Product introductionChapter 1: Product introduction
Chapter 1: Product introduction
1-61-6
1-61-6
1-6
1.4 Rear panel features
The rear panel includes a slot for the motherboard rear I/O ports,
expansion slots, a chassis lock and intrusion switch, a vent for the system
fan, and power supply module.
9 cm system fan9 cm system fan
9 cm system fan9 cm system fan
9 cm system fan
Expansion slotsExpansion slots
Expansion slotsExpansion slots
Expansion slots
RJ-45 LAN portsRJ-45 LAN ports
RJ-45 LAN portsRJ-45 LAN ports
RJ-45 LAN ports
Power supply modulePower supply module
Power supply modulePower supply module
Power supply module
PS/2 mouse portPS/2 mouse port
PS/2 mouse portPS/2 mouse port
PS/2 mouse port
PS/2 keyboard portPS/2 keyboard port
PS/2 keyboard portPS/2 keyboard port
PS/2 keyboard port
USB 2.0 portsUSB 2.0 ports
USB 2.0 portsUSB 2.0 ports
USB 2.0 ports
Serial portSerial port
Serial portSerial port
Serial port
VGA portVGA port
VGA portVGA port
VGA port
Parallel portParallel port
Parallel portParallel port
Parallel port
PowerPower
PowerPower
Power
connectorconnector
connectorconnector
connector

ASUS TS100-E3ASUS TS100-E3
ASUS TS100-E3ASUS TS100-E3
ASUS TS100-E3 1-71-7
1-71-7
1-7
1.5 Internal features
The barebone server system includes basic components like motherboard,
power supply, floppy disk, optical drive, and cables as shown.
11
11
1
1. Power supply module
2. Chassis fan
3. ASUS P5MT motherboard
4. Expansion card slots
5. Optical drive
6. 1 x 5.25-inch drive bay
7. Floppy drive
8. 2 x internal 3.5-inch drive bays
22
22
2
33
33
3
44
44
4
55
55
5
66
66
6
77
77
7
88
88
8

Chapter 1: Product introductionChapter 1: Product introduction
Chapter 1: Product introductionChapter 1: Product introduction
Chapter 1: Product introduction
1-81-8
1-81-8
1-8
1.6 LED information
The barebone system comes with five LED indicators. Refer to the following
table for the LED status description.
System and HDD LEDSystem and HDD LED
System and HDD LEDSystem and HDD LED
System and HDD LED
Power LED (blue)Power LED (blue)
Power LED (blue)Power LED (blue)
Power LED (blue)
Drive Status LED (green/red)Drive Status LED (green/red)
Drive Status LED (green/red)Drive Status LED (green/red)
Drive Status LED (green/red)
LEDLED
LEDLED
LED IconIcon
IconIcon
Icon Display statusDisplay status
Display statusDisplay status
Display status DescriptionDescription
DescriptionDescription
Description
SystemSystem
SystemSystem
System
Power LED ON System power ON
Blinking System is in suspend mode
Drive Status LED Green Bridge board connected to backplane
Installed HDD is in good condition
Red HDD failure
SPEEDACT/LNK
RJ-45
LAN port LEDsLAN port LEDs
LAN port LEDsLAN port LEDs
LAN port LEDs
ACT/LINK LEDACT/LINK LED
ACT/LINK LEDACT/LINK LED
ACT/LINK LED SPEED LEDSPEED LED
SPEED LEDSPEED LED
SPEED LED
StatusStatus
StatusStatus
Status DescriptionDescription
DescriptionDescription
Description StatusStatus
StatusStatus
Status DescriptionDescription
DescriptionDescription
Description
OFF NO link OFF 10 Mbps connection
GREEN Linked ORANGE 100 Mbps connection
BLINKING Data activity GREEN 1 Gbps connection

ASUS TS100-E3ASUS TS100-E3
ASUS TS100-E3ASUS TS100-E3
ASUS TS100-E3
2-1
This chapter lists the hardware setup
procedures that you have to perform when
installing or removing system components.
Chapter 2
Hardware setup

Chapter 2: Hardware setupChapter 2: Hardware setup
Chapter 2: Hardware setupChapter 2: Hardware setup
Chapter 2: Hardware setup
2-22-2
2-22-2
2-2
2.1 Chassis cover
The chassis features a “screwless design” that allows convenient assembly
and disassembly. You can simply push or slide mechanical bolts and locks to
remove the cover.
2.1.12.1.1
2.1.12.1.1
2.1.1 Removing the side coverRemoving the side cover
Removing the side coverRemoving the side cover
Removing the side cover
1. Remove the two screws that
secure the cover to the chassis.
2. Slide the side cover for about half
an inch toward the rear until it is
disengaged from the chassis.
3. Carefully lift the cover and set it
aside.
Viewing the internal structureViewing the internal structure
Viewing the internal structureViewing the internal structure
Viewing the internal structure
Without the side cover, the internal structure and installed components of
the barebone server vary depending on the model you purchased. Refer to
section “1.5 Internal features” for the different model configurations.
Perform the procedures in the succeeding sections to install the CPU, system
memory, disk drives, and expansion cards; replace fans and power supply;
and connect the system cables.
11
11
1
11
11
1
22
22
2