ASUSTOR AS6702T User manual

Memory Installation Guide
For ASUSTOR AS67 Series NAS
Ver. 4.0.0116

ASUSTOR NAS Memory Installation Guide
Page 2 of 7
Table of Contents
1. Introduction............................................................................................................... 3
1.1. Notes and Precautions ........................................................................................... 3
1.2. Parts and Tools Needed.......................................................................................... 3
2. Installation Guide........................................................................................................ 4
2.1. Removing the Cover .............................................................................................. 4
2.2. Installing Memory.................................................................................................. 5
2.3. Replacing the Cover .............................................................................................. 5
3. Appendix.................................................................................................................. 7
3.1. Troubleshooting.................................................................................................... 7
3.2. Contact ASUSTOR Technical Support ......................................................................... 7

ASUSTOR NAS Memory Installation Guide
Page 3 of 7
1.
I
In nt tr ro od du uc ct ti io on n
1.1. Notes and Precautions
All AS67 Series NAS devices support up to 16GB of memory. Before adding or removing memory modules,
please read the following precautions thoroughly.
• Your NAS and memory modules use high precision components and electronic connector technology.
To avoid invalidation of the warranty during your product warranty period, we recommend that:
ü Memory for AS67 series devices may be purchased from local dealers or the online ASUSTOR
Accessories Store (http://shop.asustor.com).
ü You should not install a memory module by yourself, if you are not familiar with upgrading memory
on a computer.
ü You should not touch the connectors or open the memory module compartment cover.
• Addition or removal of memory modules by yourself may result in an accident or malfunction of your
NAS caused by breakage of the slot and module or a connection mistake. In this case, a repair fee will
be charged.
• Be careful not to injure your hands or fingers with sharp edges of the memory module, inner
components, or circuit boards of your NAS.
• ASUSTOR does not guarantee that third party memory modules will work in your NAS.
• Be sure to turn off your NAS and peripherals and disconnect all attachments and connection cables
before adding or removing memory modules.
• To prevent damage from electrostatic discharge to memory modules, follow the instructions below:
ü Do not work at a location that produces static electricity easily, such as on a carpet.
ü Before adding or removing memory modules, touch an external metal object other than your NAS
to ground yourself and eliminate static electricity. Do not touch any metal parts inside the NAS.
• Do not insert a memory module into the slot facing in the wrong direction. It may cause damage to the
module or slot, or cause the circuit board to catch fire.
• Use a screwdriver that matches the size of the screws.
• Do not remove or loosen screws that are not specified to be removed.
1.2. Parts and Tools Needed
• Phillips head screwdriver

ASUSTOR NAS Memory Installation Guide
Page 4 of 7
2.
I
In ns st ta al ll la at ti io on n G Gu ui id de e
2.1. Removing the Cover
l Shutdown the NAS by selecting [Shut down] from the ADM User Menu.
l Disconnect all cables and devices connected to the NAS including the power cord.
AS6702T
AS6704T
AS6706T
l Use a screwdriver to loosen the three screws found on the rear of the NAS as shown in the illustration.
AS6702T
AS6704T
AS6706T

ASUSTOR NAS Memory Installation Guide
Page 5 of 7
l Grip the cover from both sides with two hands and then gently push it back to remove it from the
chassis.
2.2. Installing Memory
l Upon opening the NAS, RAM slots can be found on the motherboard on the left hand side of the NAS.
Insert a DIMM into an empty slot at a 45° angle and align the notches of the RAM and the slot.
l Gently push the DIMM down until both latches click into place. RAM should be flush with the
motherboard.
2.3. Replacing the Cover
l Replace the cover and tighten the three screws that were removed previously.

ASUSTOR NAS Memory Installation Guide
Page 6 of 7
AS6702T
AS6704T
AS6706T
l Reconnect all cables including the power cord and then start up the NAS.
AS6702T
AS6704T
AS6706T

ASUSTOR NAS Memory Installation Guide
Page 7 of 7
3.
A
Ap pp pe en nd di ix x
3.1. Troubleshooting
Q: After installing new memory my NAS won’t start. What’s wrong?
A: Please follow the steps below to resolve this issue:
1. Check if the LED indicators, system buzzer, and LCD display panel are operating normally.
2. If your NAS is unable to recognize the new memory or cannot be started up properly, please check that
you have used memory that is compatible with the system. Also, please reinstall the memory in order to
confirm that it has been installed properly.
3. If your NAS still does not operate normally, please remove the newly installed memory module, and then
restart the NAS to see if it is able to operate normally.
4. If the previous steps have not solved your problem, please contact your local dealer or ASUSTOR
customer service.
3.2. Contact ASUSTOR Technical Support
Contact us:
1. Email: [email protected]
2. Online Support Form: http://www.asustor.com/service/online_support
3. ASUSTOR Online Community: http://forum.asustor.com/