ASUSTOR FS6706T User manual

Quick Installation Guide
Applicable Models
FS6706T / FS6712X
Ver.2.3.0903 (2015-3-2)
Ver. 4.2.0307(2023-3-7)
AS

2
Table of Contents
Notices .....................................................................................................................................................3
Safety Precautions ...................................................................................................................................4
1. Package Contents................................................................................................................................5
2. Optional Accessories ...........................................................................................................................6
3. Hardware Installation Guide ...............................................................................................................7
Tools Required for M.2 SSD Installation ..............................................................................................7
Installing M.2 SSDs ...............................................................................................................................7
Securing the Power Cord....................................................................................................................11
Connecting and Powering on the NAS ...............................................................................................12
Upgrading System Memory................................................................................................................13
4. Software Installation Guide ...............................................................................................................17
Download Center Installation ............................................................................................................17
Web Installation .................................................................................................................................19
Installation Using a Mobile Device.....................................................................................................20
5. Appendix ............................................................................................................................................23
LED Indicators.....................................................................................................................................23
Rear Panel...........................................................................................................................................24
(Optional Step) Installing M.2 SSD Heatsinks (Sold Separately) ........................................................25
Shutting Down Your NAS....................................................................................................................26
Troubleshooting .................................................................................................................................27

3
Notices
Federal Communications Commission Statement
This device complies with FCC Rules Part 15. Operation is subject to the following two conditions:
This device may not cause harmful interference.
This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a class A digital device, pursuant to Part 15 of the
Federal Communications Commission (FCC) rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority
to operate the equipment.
CE Mark Warning
CE marking for devices without wireless LAN/Bluetooth
The shipped version of this device complies with the requirements of the EEC directives 2004/108/EC "Electromagnetic
compatibility" and IEC60950-1:2005 (2nd Edition)+A1:2009 "Information technology equipment-Safety ".”
The Adopted Trademarks HDMI, HDMI High-Definition Multimedia Interface,
HDMI trade dress and the HDMI Logos are trademarks or registered
trademarks of HDMI Licensing Administrator, Inc. in the United States and
other countries.

4
Safety Precautions
The following safety precautions will increase the life of the NAS. Follow all precautions and instructions.
Electrical Safety
Unplug this product from the power source before cleaning.
Use only the bundled power adapter. Using other power adapters may damage your device.
Ensure that you plug the power adapter to the correct power input rating. Check the label on the power adapter for the
power rating.
Operation Safety
DO NOT place this product in a location where it may get wet.
Place this product on a flat and stable surface.
Use this product in environments with an ambient temperature between 0°C and 40°C.
DO NOT block the air vents on the case of this product. Always provide proper ventilation for this product.
DO NOT insert any object or spill liquid into the air vents. If you encounter technical problems with this product,
contact a qualified service technician or your retailer. DO NOT attempt to repair this product yourself.
DO NOT throw this product in municipal waste.
This product has been designed to enable proper reuse of parts and recycling. This
symbol of the crossed out wheeled bin indicates that the product (electrical and
electronic equipment) should not be placed in municipal waste. Check local regulations
for disposal of electronic products.

5
1.Package Contents
Applicable Models : FS6706T, FS6712X
Model Name
FS6706T
FS6712X
Power Cord
x1
x1
Adapter
x1
x1
RJ45 Network Cable
x2
x1
Power Cord Tie
x1
x1
Quick Installation Guide
x1
x1

6
2.Optional Accessories
The items below may be purchased from the ASUSTOR Accessories Store http://shop.asustor.com.

7
3.Hardware Installation Guide
All data stored on installed M.2 SSDs will be deleted and cannot be recovered when initializing your NAS or creating a
volume. Before initializing, ensure data on M.2 SSDs is first backed up.
Tools Required for M.2 SSD Installation
Phillips head screwdriver
At least one 2280 NVMe M.2 SSD. For a list of compatible M.2 SSDs, click here.
Installing M.2 SSDs
Installing SSDs in Slots 1-6 –FS6706T and FS6712X
1. Installed M.2 slots SSDs are numbered sequentially.
2. Use a Phillips screwdriver to remove the screws on the bottom cover.

8
3. Slide the cover away from the NAS and lift upon release.
4. Align M-key M.2 SSD with the M-key notch of the slot and insert at a 45° angle.
5. Once inserted, push the SSD down so that it is flush with the motherboard while pushing SSD locking lever open to
secure the SSD. Once SSD is fully flush, release lever to secure SSD. If heatsinks are needed, they should be installed
now.

9
6. Return cover back to its original position by sliding it towards the NAS.
7. Use a Phillips screwdriver to restore screws.
Installing SSDs into Slots 7-12 –FS6712X Only
1. M.2 slots for NVMe SSDs are numbered sequentially from 1 to 12 as shown below. These instructions

10
2. Use a Phillips screwdriver to remove the screws of the top cover.
3. Please remove the cover in the direction of the arrow.
4. Align M-key M.2 SSD with the M-key notch of the slot and insert at a 45° angle.
5. Once inserted, push the SSD down so that it is flush with the motherboard while pushing SSD locking lever open to
secure the SSD. Once SSD is fully flush, release lever to secure SSD. If heatsinks are needed, they should be installed
now.