ATD Tools Atd-7414 Instructions for use

Brake Drum
Handler
OperatingInstructions&PartsManual
ATD Tools Inc.
160 Enterprise Drive, Wentzville, MO 63385 ATD7414-M0
Printed in China
Model No. Atd-7414

Save these instructions. For your safety, read and understand the information contained within. The owner and
operator shall have an understanding of this product and safe operating procedures before attempting to use this
product. Instructions and Safety information shall be conveyed in the operators native language before use of this
productisauthorized.Makecertainthattheoperatorthoroughlyunderstandstheinherentdangersassociatedwiththe
use and misuse of the product. If any doubt exists as to the safe and proper use of this product as outlined in this
factory authorized manual, remove from service immediately. Inspect before each use. Do not use if broken, bent,
cracked or otherwise damaged parts are noted. If the brake drum handler has been or suspected to have been sub-
jected to a shock load (a load dropped suddenly and unexpectedly upon it), discontinue use until checked out by an
ATD authorized service center. Owners and operators of this equipment shall be aware that the use of this equipment
mayrequirespecialtrainingand knowledge.Itis recommendedthatan annualinspectionbe donebyqualified personnel
and that any missing or damaged decals, warning / safety labels or signs be replaced with ATD Tools authorized
replacementparts only. Any brakedrumhandler that appearstobe damaged inanyway,iswornor operatesabnormally
shallbe removed from serviceimmediately.
PRODUCT DESCRIPTION
ATDToolsBrakeDrumHandlerisdesignedfortheremoval,installation,andtransportofcompatiblebrakedrumsand
brake drum / hub assemblies. Compliance with factory standards to ensure safety, strength and stability.
2
SPECIFICATIONS
Model Min. Height Max. Height
Product Size
(L x W x H ) Net Weight
ATD-7414 10 5/8" 15" 61 3/8" x 19 5/8" x 17 5/8" 54 lbs
Figure1 -ModelATD7414Components
BEFORE USE
1.Readandunderstandinstructionaland warning materials provided with and on this product.
2.Verifythatthe product and the application are compatible, ifin doubt contactATD Tools Technical Service (636)627-
9050.
3. Thoroughly familiarize yourself with this product.
4. Inspect drum handler before each use. Do not use if bent, broken or cracked components are noted. Ensure that
allparts move freely.
5.Consultthevehiclemanufacturer'sservicemanualforproper preparation and procedures for removing & installing a
drum.
• Study, understand, and follow all instructions
provided with and on this device before use.
• Inspect before use. Do not use if bent, broken,
crackedor otherwise damaged components are
noted.
• Use only for removal, installation, and transport of
brake drums which configuration is compatible
with this device.
• Secure drum before transporting.
• Use only on hard, level surface.
• Raise and lower the brake drum slowly.
• Always wear steel-toed shoes when using this
device.
• Brake drum dust is hazardous to your health.
• Consult Federal, State and local regulations
concerning the safe handling of asbestos and
what precautions to take when handling.
• Failure to heed these markings may result in
personalinjuryand/or property damage.
WARNING
!
HandleGrip
Handle
HookBracket
(drum/hub
assy. position)
AngleAdjustable
Wheel
Wheel
HoldingArm
Handle Lock Pin
Hook Lock Pin
HandleFork
DrumHandler
Frame
WheelAxle

3
ASSEMBLY (refer to figure 4 on page 4)
1.Threadtheconnectingblock(#12)tomiddle rod (#6),
then secure to base (#3) with M10 nut and washer
(#21 & 22).
2. Secure top cover (#4) and two holding arms (#14) to
base (#3) with M6x25 bolts, washers & nuts (#15,
16 & 17).
3.Attach wheel axle (#5) to base (#3) with M12x40 bolts
& nuts (#23 & 24).
4.Attach wheels (#18) and washers(#19) to wheel axle
(#5), then secure with cotter pins (#20).
5. Secure the axle links (#5A) of wheel axle (#5) to
connecting block (#12) with M12 bolts and washers
(#13 & 19).
6.Attach hookbracket(#9)totop cover (#4) and secure
with lock pin (#11).
7.Attach angle adjustable wheel (#7) to middlerod(#6)
with set screw (#8).
8.Attachhandle(#1)totopcover(#4)withlockpin(#2).
9. Insert handle grip (#10) to handle (#1).
OPERATION
1.Preparethebrakedrumorbrakedrum/hub assembly
for removal according to the instructions in vehicle
servicemanual.
2. Place drum handler in a horizontal position.
3.Turn theangleadjustable wheeluntilthe drumhandler
is in its lowest postion.
4. Position the handler under the drum until the holding
arms meet the outer surface of the drum.
5. Turn the angle adjustable wheel clockwise until the
handlermeetsthe lower surface of the drum.
6. Lower the handle to slightly lift the drum. Pull the
handler and drum back, away from the brake
assembly.
7. Forremoving/installingdrumonly:
Flipthe hook bracketintothehub openingofthedrum
as shown in figure 2.
For removing/installingdrumandhubasanassembly:
Position the hook bracket reverse as shown in figure
3 to allow a wheel nut to secure hook to drum/hub
assembly.
8. It may be necessary to adjust the hook. Remove the
hooklockpin,andmovethehookbrackettoanyone
offour hole locations.
9. Pull the drum completely away from the brake
assembly.Slowlyandcarefullyliftthehandleto place
thedrumface down onthefloor,being cautiousofthe
transferof loadweight.
Note:ReversetheprocesstoInstall thebrakedrumback
to the brake assembly. Be sure to align the drum with
thestudsand followtheinstructionsinthevehicle service
manual.
MAINTENANCE
Periodically inspect the drum handler. Ensure all parts
movefreely.Ifrust appears,sandaffected areaandcover
with suitable utility paint. When not in use, store drum
handler in upright position and in a clean, dry area.
REPLACEMENT PARTS (see page 4)
Available Parts: Pleaserefertotheparts drawing when
ordering parts. Not all components of the brake drum
handler are replacement items, but are illustrated as a
convenient reference of location and position in the
assembly sequence. When ordering parts, give model
number,serial numberandparts description.Callor write
forcurrent pricing:
ATDToolsInc.160EnterpriseDrive,Wentzville,MO63385
U.S.A. Tel:[phone] Fax:[phone]
HookPosition
(fordrum only)
Figure2 - Illustration for removing/installing drum
BrakeDrum
HoldingArms
HookPosition
(fordrum/hubassy.)
Drum/HubAssy.
Figure3-Illustrationforremoving/installing drum/hub
assembly
HoldingArms

Figure 4 - Replacement Parts Illustration for ModelAtd-7414
4ATD7414-M0
Item# Part# Description Qty.
1T230-00001-000 Handle 1
2T230-06000-000 Lock Pin 1
3N/A Base 1
4T230-02000-000 Top Cover 1
5T230-04000-000 Wheel Axle 1
6T230-00003-000 Middle Rod 1
7T230-08000-000 Adjustable Wheel 1
8*Screw 1
9T230-01000-000 Hook Bracket 1
10 T230-00006-000 Handle Grip 1
11 T230-07000-000 Lock Pin 1
12 T230-05000-000 Connecting Block 1
13 T230-00004-000 Hex Bolt M12 2
14 T230-00002-000 Holding Arm 2
15 *Hex Bolt M6x25 6
16 *Washer 6
Item# Part# Description Qty.
17 *Nut M6 6
18 T230-00005-000 Wheel 8" 2
19 *Washer 6
20 *Cotter Pin 2
21 *Washer 1
22 *Nut M10 1
23 *Hex Bolt M12x40 2
24 *Nut M12 2
25 *Set Screw 2
(*) T230-90009-K01 Hardware Kit -
-Atd7414-M0 Manual -
-Atd7414-L0 Label -
ONE YEAR LIMITED WARRANTY
For a period of one (1) year from date of purchase, ATD Tools Inc. will repair or replace, at its option, without
charge, any of its products which fails due to a defect in material or workmanship under normal usage. This limited
warranty is a consumer's exclusive remedy.
Performanceofanyobligation under this warranty may be obtainedbyreturningthewarrantedproduct,freight
prepaid, to ATD Tools Inc. WarrantyService Department,160 Enterprise Drive, Wentzville, MO 63385.
Except where such limitations and exclusions are specifically prohibited by applicable law, (1) THE
CONSUMER'S SOLEAND EXCLUSIVE REMEDY SHALL BE THE REPAIR OR REPLACEMENT OF DEFECTIVE
PRODUCTSAS DESCRIBEDABOVE. (2) ATD Tools Inc. SHALL NOTBELIABLE FORANYCONSEQUENTIALOR
INCIDENTALDAMAGEORLOSSWHATSOEVER.(3)ANYIMPLIEDWARRANTIES,INCLUDINGWITHOUTLIMITATION
THEIMPLIEDWARRANTIES OF MERCHANTABILITYAND FITNESSFORA PARTICULAR PURPOSE, SHALL BE
LIMITEDTO ONEYEAR, OTHERWISE THEREPAIR, REPLACEMENT OR REFUNDASPROVIDEDUNDERTHIS
EXPRESSLIMITEDWARRANTY IS THE EXCLUSIVE REMEDYOFTHECONSUMER,ANDIS PROVIDED IN LIEU
OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. (4) ANY MODIFICATION, ALTERATION, ABUSE,
UNAUTHORIZED SERVICE OR ORNAMENTAL DESIGN VOIDS THIS WARRANTYAND IS NOT CCOVERED BY
THISWARRANTY.
Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not
applytoyou. Some states do not allow the exclusion orlimitationofincidentalorconsequential damages, so the above
limitationorexclusionmay not apply to you. This warranty gives you specific legal rights, and youmayalsohaveother
rights which vary from state to state.
Hardware Kit includes item# 8, 15, 16, 17,
19, 20, 21, 22, 23, 24 & 25
Replacement Parts for Atd-7414