Atdec A-NC User manual

Installation Instructions
Notebook Cart
Step 2. Remove the cover plates
Step 1. Check Components
Component Checklist
Step 3. Remove safety screw on post bottom
Tools Required:
Phillips head
Screwdriver
Hardware:
A-NC
IMPORTANT INFORMATION
! IMPORTANT - Install as per Installation Instructions
! This product is compatible with laptops up to 400mm (15.7”) wide.
! This product supports a maximum load 5kg.
! The manufacturer accepts no responsibility for incorrect installation.
Check that you have received all parts against the Component Checklist.
M5x8
x6
Key
x2
5mm Allen key
x1
M8x12
x12
Top Cabinet
x1
Base
x1
Post
x1
Handle
x1
Handle top cap
x2
Remove the 4x M5 screws on the cover
plates using the Phillips head screwdriver.
Remove screw
M4 screws
x4
Non-slip pad
x3

Step 4. Attach post to base
Step 6. Attach post and base to top cabinet
Step 5. Replace cover trays
Step 7. Attach handle
M4 screws x4
M8 screws
x7
Install caps
Install M8 screws
x5
Pedal forward
Attach the post
to the base
using the 7x
M8 screws
and the allen
wrench.
Replace both cover trays
with 4x M4 screws and
the phillips screwdriver.
Note: This step may require two people to
flip the assembly over.
Attach handle to the back of cabinet top.
M5 screws x6

Mouse tray
No portion of this document or any artwork contained herein should be reproduced in any way without the express written consent of Atdec Pty Ltd.
Due to the continuing product development, the manufacturer reserves the right to alter specifications without notice. Published 12-05-14 ©
Step 9. Slide open to insert laptop
Step 10. Route cables
Step 12. How to adjust height
Step 11. Keyboard and mouse tray
Step 8. Check operation
Attach non-
slip pads
to stand if
necessary.
Cable access hole
Check the operation of the locking drawer and casters. Slide the cabinet top
open to place the
laptop.
Slide closed and lock
to secure laptop.
Cable access hole
Press pedal to gain height. Release
the pedal to stop movement.
Press pedal and apply downward
pressure to cabinet to lower
Keyboard
tray
Push to lock and
unlock the casters
Drawer lock
Power supply storage
Remove
stand for
larger
laptops