Atel Arch W01 User manual

W01
LTE WIFI Router by ATEL
User Manual

Contents
Overview ...................................................................................................................................................... 3
System Requirements.................................................................................................................................. 3
Components................................................................................................................................................. 3
Key ............................................................................................................................................................ 4
LED Indicator............................................................................................................................................ 4
Power supply and Installation..................................................................................................................... 4
Accessing the Network................................................................................................................................ 5
Using Your W01 for the First Time .............................................................................................................. 5
System Requirements.............................................................................................................................. 5
Installing the LTE Nano SIM Card............................................................................................................ 5
Using Your W01 after Setup is Complete.................................................................................................... 5
WIFI Router to share connections .......................................................................................................... 5
Wi-Fi and WIFI Router (http://192.168.0.1) Security and Password ....................................................... 5
Updating Your W01 software...................................................................................................................... 6
Managing Your WIFI Router........................................................................................................................ 6
Device status and Configurate this device ................................................................................................. 6
Question and Answer .................................................................................................................................. 7
Before you start ........................................................................................................................................... 7
Common Problems and Solutions............................................................................................................... 7
Trademark .................................................................................................................................................. 10

Overview
Thank you for choosing the W01 Arch, LTE WIFI Router by ATEL!
Having the Arch W01 at your fingertips will allow you to access LTE network for fast uploads and
downloads on your own Wi-Fi hotspot. You can also connect up to 15 Wi-Fi capable devices to the Internet
at once - laptops, tablets, Smartphones and more.
System Requirements
⚫Compatible with all IEEE802.11b/g/n/ac Wi-Fi enabled devices.
⚫Works with the latest versions of most browsers*.
* It is recommended to use the latest versions of Internet browsers. Outdated versions may not be
compatible with the W01 Web Admin User Interface, http://192.168.0.1or https://192.168.0.1.
Components

Key
Power Button
Power on/off for the W01. Quick press power key two times, start WPS
Type C Charging Port
The USB charger connects here.
Battery
Optional, there is not battery in original giftbox, if you need battery as back up power supply, please
contact your sales channel or buy it from ATEL website.
Reset
To perform reset of your device, gently press and hold the button for 3 seconds, then release.
SIM Card
Lift the stopper to insert or replace the Nano SIM card.
LED Indicator
LED
Color
Action
Function Description
Power
Green
On
Power supply existing
OFF
OFF
Power off or Power supply not existing
WiFi
Green
On
WiFi connected with a WiFi Client
Off
WiFi not connected
Green
Blinking
On 1S, off 1S, during WPS is enabled
SMS
Green
Always on
Unread SMS
Off
No unread SMS
LTE/3G
Green
On
If has LCD 5 bar
Blue
On
If has LCD 4 bar
Cyan(B+G)
On
If has LCD 3 bar
Purple(R+B)
On
If has LCD 2 bar
Yellow
On
If has LCD 1 bar
Red
Blinking
Error, no SIM or internet does not connect
Off
No Signal
Upgrading
All above LED
On
Power and LTE LED light white, WiFi and SMS LED light green during F/W
upgrading
Power supply and Installation
Type C USB connector is the main power supply from 5 V AD-DC adaptor. You can find and buy a back up
battery from ATEL website if needed
Note: W01 should be installed on the wall where have good LTE signal, you can find double-sided tape in
giftbox for easy installation

Accessing the Network
Work effectively at home or office with the reliable broadband speed that the LTE service provides. You
can connect to the internet at speeds fast enough to keep up-to-date on all your email correspondence,
download attachments, and access your corporate internet.
Using Your W01 for the First Time
System Requirements
Your computer, tablet, or other wireless devices need Wi-Fi capability and Internet browser software only.
Your W01 is compatible with most major operating systems and the latest versions of browsers.
Installing the LTE Nano SIM Card
If not already inserted, follow the instructions below to install your LTE Nano SIM card.
⚫Remove the back cover of your device.
⚫Lift the “LIFT” tab and slide your Nano SIM card in the SIM card slot with Wireless Carrier logo facing
up. After installation, secure the “LIFT” tab back into place.
IMPORTANT! Do not bend or scratch your Nano SIM card. Avoid exposing your Nano SIM card to static
electricity, water, or dirt. Whenever you insert or remove the SIM card, ensure your W01 is powered off
and is not connected to any power source. Never use tools, knives, keys, or any type of object to force
the door open or to remove the Nano SIM card.
Using Your W01 after Setup is Complete
WIFI Router to share connections
You can use your W01 as a wireless WIFI Router to connect to a total of 15 Wi-Fi capable devices to the
WIFI broadband network.
Wi-Fi and WIFI Router (http://192.168.0.1) Security and Password
The W01 comes from the factory with security turned on. By default, WIFI Routerusernameandpassword
is ‘admin’. Your WIFI Router password is always ‘admin’ unless you change it in the WIFI Router home
page.
You can create your own WIFI Router password by signing into the WIFI Router home page. After you
change your own WIFI Router home password, you will be required to use the new password to sign in to
the WIFI Router home page.

To change your WIFI Router home password:
⚫Connect your Wi-Fi capable device to your W01.
⚫Open a web browser and enter https://192.168.0.1 or http://192.168.0.1.
Updating Your W01 software
New software is updated automatically in the following scenarios.
Upgrade:
If new version is found, this button will appear. Note Please not remove power supply during F/W
upgrading, loss of power during the upgrade could damage the device.
Check for Update:
Check if the current version is up to date,Click upgrade manual Upgrade.
Equipment standby 6 hours, after restart automatically upgrade.
Managing Your WIFI Router
Access the W01 WIFI Router home page. You can access your WIFI Router device information using an
internet browser.
If there is firmware upgrade in the future, the WebGUImay will be changed without notice.
⚫Access W01WIFI Router using a browser. Connect your Wi-Fi capable device to the W01.
⚫Open a web browser on your connected device and open your home page by entering either
https://192.168.0.1or http://192.168.0.1.
⚫Enter the Username/Password and Click Login. If you entered the correct password, the Web User
Interface screen appears.
NOTE: The default Username/Password is 'admin'. On your first login, you will be directed to 'Change
password'
Device status and Configurate this device
The W01 WIFI Router home page allows you to quickly access all menu options for your W01.
⚫HOME

⚫CONNECTED DEVICES
⚫DATA USAGE
⚫MESSAGES
⚫SETTINGS
⚫ADVANCED
⚫ABOUT
You can get device information and working status via about menu, and you can configurate this device
according to help guide information on right side.
The W01 WIFI Router home page allows you to quickly access all menu options for your W01.
Question and Answer
The following tips can help solve many common problems encountered while using the W01.
Before you start
⚫Make sure you are using your W01 in the correct geographic region (within the wireless coverage
area of your provider).
⚫Ensure that your wireless coverage extends to your current location by using the interactive wireless
carrier’s coverage map tool.
⚫Ensure that you have an active service plan.
⚫Restarting your computer and your W01 can resolve many issues.
IMPORTANT! Before contacting customer care, be sure to restart both your W01 and any device that is
currently connected.
Common Problems and Solutions
1. How do I perform a Power Reset on W01?
Using the power button: Press and hold the power button for 10 seconds until the W01 restarts.

2. How do I perform a Reset?
Using the reset button: Remove the back cover. Press down the reset button for 3 seconds and release.
Then your W01 will perform the reset and restart automatically.
3. How do I perform a Factory Reset?
Using WIFI Router Homepage: Connect to your W01 and then open WIFI Router home page
(https://192.168.0.1, or, http://192.168.0.1). Select About>Backup and Restore and Click Restore Factory
Defaults.
4. I cannot connect to Wi-Fi after changing Wi-Fi password.
Your Wi-Fi devices save the previously used Wi-Fi names associated with the passwords used to access
the Wi-Fi name. When you change the Wi-Fi password only for your W01 and keep the same Wi-Fi Name,
the devices try to connect to your W01 using the Wi-Fi name and previous Wi- Fi password saved,
causing Wi-Fi authentication error.
5. I cannot access the https://192.168.0.1.
Ensure that Wi-Fi connection is enabled on your device and that you have selected the correct Wi-Fi
name (SSID) for your W01 connection. Also, make certain that you are entering the correct full URL
address as https://192.168.0.1. If this URL address does not work, try the IP address http://192.168.0.1.
PowerButton

I cannot log into https://192.168.0.1.Ensure that you are entering the correct WIFI Router password to
sign in. The default WIFI Router login password is “admin” unless you have previously changed. If you
have forgotten your password, reset your device by pressing the Reset button.
Regulatory Statements
FCC Equipment Authorization ID: XYO-W01
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
⚫This device may not cause harmful interference.
⚫This device must accept any interference received, including interference that may cause undesired
operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
FCC CAUTION: Any changes or modification not expressly approved by the party responsible for
compliance could void the user's authority to operate this equipment.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
RF Exposure Warning Statements:
The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20
cm from all persons during the normal operations.
NOTE: The Radio Frequency (RF) emitter installed in your modem must not be located or operated in
conjunction with any other antenna or transmitter, unless specifically authorized by ATEL.

Trademark
© 2020 Asiatelco Technologies CO.,. All rights reserved.