ATEN CAMLIVE PRO User manual

UC3022
CAMLIVE™ PRO Dual HDMI to
USB-C UVC Video Capture
User Manual

CAMLIVE™ PRO User Manual
ii
Compliance Statements
FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE
STATEMENT
This equipment has been tested and found to comply with the limits for a Class
B digital service, pursuant to Part 15 of the FCC rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. Any changes or modifications made to this equipment may void the
user’s authority to operate this equipment. This equipment generates, uses, and
can radiate radio frequency energy. If not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of
the following measures:
 Reorient or relocate the receiving antenna.
 Increase the separation between the equipment and receiver.
 Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
 Consult the dealer or an experienced radio/TV technician for help.
The device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
FCC Caution: Any changes or modifications not expressly approved by the
party responsible for compliance could void the user's authority to operate this
equipment.
KCC Statement
Industry Canada Statement
This Class B digital apparatus complies with Canadian ICES-003.

CAMLIVE™ PRO User Manual
iii
HDMI Trademark Statement
The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI
Logo are trademarks or registered trademarks of HDMI Licensing Administrator,
Inc.
RoHS
This product is RoHS compliant.
The frequnecy and maximum EIRP Power in EU are listed as below
2402MHz~2480MHz:0.32dBm
You are cautioned that changes or modifi cations not expressly approved by the
part responsible for compliance could void the user’s authority to operate the
equipment.
FCC RF Radiation Exposure Statement:
1. This Transmitter must not be co-located or operating in conjunction with
any other antenna or transmitter.
2. This equipment complies with FCC RF radiation exposure limits set forth
for an uncontrolled environment. This equipment should be installed and
operated with a minimum distance of 20 centimeters between the radiator
and your body.
Radiation Exposure Statement: This equipment complies with IC radiation
exposure limits established for an uncontrolled environment. This equipment
must be installed and operated with a minimum distance of 20 cm between the
radiation source and your body.
Declaration d'exposition aux radiations: Cet equipement est conforme aux
limites d'exposition aux rayonnements IC etablies pour un environnement non
controle. Cet equipement doit etre installe et utilise avec un minimum de 20 cm
de distance entre la source de rayonnement et votre corps.
This equipment should be installed and operated with a minimum distance of 20
cm between the radiator and your body.
Dieses Gerät sollte mit einem Mindestabstand von 20 cm zwischen dem Kühler
und Ihrem Körper installiert und betrieben werden.

CAMLIVE™ PRO User Manual
iv
警告使用者： 根據 NCC 低功率電波輻射性電機管理辦法規定：
第十二條 經型式認證合 之低功率射頻電機，非 經許可， 公司、 商號
或使用者均不得擅自變更頻率、加大功率或變更原設計之特性及功能。
第十四條 低功率射頻電機之使用不得影響飛航安全及干擾合法通信；
經發現有干擾現象時，應立即停用，並改善至無干擾時方得繼續使用。
前項合法通信，指依電信法規定作業之無線電通信。低功率射頻電機須
忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。
製造商： 宏正自動科技股份有限公司
地址 ：新北市汐止區大同路二段 125 號三樓
最大操作環境溫度 :
40ºC
最大額定電壓 : DC 5V
設備名稱
Equipment
Name
CAMLIVE™ PRO 雙 HDMI
至 USB-C UVC 視訊影像擷取
器
型號 (型式)
Type designa-
tion (Type)
UC3022
單元 Unit
限用物質及其化學符號
Restricted substances and its chemical symbols
鉛 Lead
(Pb)
汞
Mercury
(Hg)
鎘
Cadmium
(Cd)
六價鉻
Hexavalent
chromium
(Cr
+6
)
多溴聯苯
Polybrominated
biphenyls
(PBB)
多溴二苯醚
Polybrominated
diphenyl ethers
(PBDE)
電纜線 Cable
－○ ○ ○ ○ ○
印 電路部件
PCBA
－○ ○ ○ ○ ○
塑膠 / 其他部件
Plastic / Other
parts
○○ ○ ○ ○ ○
金屬部件 Metal
parts
－○ ○ ○ ○ ○
備考 1. 〝超出 0.1 wt % 〞及 〝超出 0.01 wt % 〞係指限用物質之百分比含量超出百分比含量基準值。
Note 1 ： “Exceeding 0.1 wt %” and “exceeding 0.01 wt %” indicate that the percentage content of the restricted
substance exceeds the reference percentage value of presence condition.
備考 2. 〝○〞係指該項限用物質之百分比含量未超出百分比含量基準值。
Note 2 ： “ ○ ” indicates that the percentage content of the restricted substance does not exceed the percentage of
reference value of presence.
備考 3. 〝－〞係指該項限用物質為排 項目。
Note 3 ： “−” indicates that the restricted substance corresponds to the exemption.

CAMLIVE™ PRO User Manual
v
User Information
Online Registration
Be sure to register your product at our online support center:
Telephone Support
For telephone support, call this number:
User Notice
All information, documentation, and specifications contained in this manual are
subject to change without prior notification by the manufacturer. The
manufacturer makes no representations or warranties, either expressed or
implied, with respect to the contents hereof and specifically disclaims any
warranties as to merchantability or fitness for any particular purpose. Any of the
manufacturer's software described in this manual is sold or licensed as is.
Should the programs prove defective following their purchase, the buyer (and
not the manufacturer, its distributor, or its dealer), assumes the entire cost of all
necessary servicing, repair and any incidental or consequential damages
resulting from any defect in the software.
The manufacturer of this system is not responsible for any radio and/or TV
interference caused by unauthorized modifications to this device. It is the
responsibility of the user to correct such interference.
The manufacturer is not responsible for any damage incurred in the operation
of this system if the correct operational voltage setting was not selected prior to
operation. PLEASE VERIFY THAT THE VOLTAGE SETTING IS CORRECT
BEFORE USE.
International http://eservice.aten.com
International 886-2-8692-6959
China 86-400-810-0-810
Japan 81-3-5615-5811
Korea 82-2-467-6789
North America 1-888-999-ATEN ext 4988
1-949-428-1111

CAMLIVE™ PRO User Manual
vi
Product Information
For information about all ATEN products and how they can help you connect
without limits, visit ATEN on the Web or contact an ATEN Authorized Reseller.
Visit ATEN on the Web for a list of locations and telephone numbers:
International http://www.aten.com
North America http://www.aten-usa.com

CAMLIVE™ PRO User Manual
vii
Package Contents
Check to make sure that all components are in working order. If you encounter
any problem, please contact your dealer.
1 UC3022 CAMLIVE™ PRO Dual HDMI to USB-C UVC Video Capture
1 USB-B to USB-C cable
1 USB-B to USB-A cable
1 power adapter
1 camera mount adapter kit
1 user instructions

CAMLIVE™ PRO User Manual
viii
Table of Contents
Compliance Statements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ii
User Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . v
Online Registration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . v
Telephone Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . v
User Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . v
Product Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .vi
Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vii
About this Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .xi
Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xii
1. Introduction
Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Planning the Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Supported Operating System and Requirements . . . . . . . . . . . . . . . . . . . 3
Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Front View. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Rear View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
2. Hardware Setup
Mounting the Camera Mount Adapter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Optional Rack Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Connecting the CAMLIVE™ PRO Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Aten OnAir Lite App Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Phone Tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
PC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Android Smartphone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
3. Livestream / Record Setup
Livestream / Record Platform . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Discovering CAMLIVE on your System . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Mac Operating System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Windows Operating System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Video and Audio Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Using the USB Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
HDCP Switching . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Using the OnAir Cam App . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Supported Systems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Installing the ATEN OnAir Lite App. . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Connecting the iOS Mobile Device . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Resetting the CAMLIVE™ PRO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

CAMLIVE™ PRO User Manual
ix
4. ATEN OnAir Lite App
ATEN OnAir Lite Application. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Supported Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Installing the ATEN OnAir Lite App . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Connecting the CAMLIVE™ PRO on your Mobile Device . . . . . . . . . 28
Disconnecting the CAMLIVE™ PRO from your Mobile Device . . . . . 29
Page Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Project Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
System Information Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Video Mixer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
Multi-Crop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Resize Crop Scene . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Renumber Crop Scene . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Remove Crop Scene . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
Add Crop Scene . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Scene Editor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Overlay Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Switching Video Source. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Reset Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Resize/Crop Tool. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Resize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Crop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Remote Deck . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Mapping Hotkey with Corresponding Softwares (OBS). . . . . . . . .42
Audio Mixer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45
Settings Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Chroma Key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48
Auto Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
More Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Advanced . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Resetting the CAMLIVE™ PRO . . . . . . . . . . . . . . . . . . . . . . . . . .52
ATEN OnAir Lite App Factory Default Settings . . . . . . . . . . . . . . . . . . . . 53
5. The Firmware Upgrade Utility
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Downloading the Firmware Upgrade Package . . . . . . . . . . . . . . . . . . 55
Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
Firmware Upgrade Methods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Starting the Upgrade. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Upgrade Succeeded . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Upgrade Failed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60
Appendix
Safety Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61

CAMLIVE™ PRO User Manual
x
Technical Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
International . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
North America . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

CAMLIVE™ PRO User Manual
xi
About this Manual
This user manual is provided to help you get the most out of your CAMLIVE™
PRO unit. It covers all aspects of the device, including installation, configuration,
and operation.
The model covered in this manual is:
An overview of the information found in the manual is provided below.
Chapter 1, Introduction introduces you to the CAMLIVE™ PRO, its purpose,
features, installation considerations, with its panel components described.
Chapter 2, Hardware Setup describes the steps that are necessary to quickly
and safely set up your CAMLIVE™ PRO.
Chapter 3, Livestream / Record Setup explains how to find CAMLIVE on your
system and guides you to set up video and audio sources using an example
(live-stream / record software / platform).
Chapter 4, ATEN OnAir Lite App explains how to download and configure the
CAMLIVE™ PRO’s OnAir Lite app.
Chapter 5, The Firmware Upgrade Utility explains how to download
CAMLIVE™ PRO’s firmware files and upgrade the device using the utility.
Appendix provides a list of safety instructions and precautions, and other
product specifications and technical information of the product.
Note:
 Read this manual thoroughly and follow the installation and operation
procedures carefully to prevent any damage to the unit or any connected
devices.
 The product may be updated, with features and functions added, improved
or removed since the release of this manual. For an up-to-date user
manual, visit http://www.aten.com/global/en/
Model Product Name
UC3022 CAMLIVE™ PRO Dual HDMI to USB-C UVC Video Capture

CAMLIVE™ PRO User Manual
xii
Conventions
This manual uses the following conventions:
Monospaced Indicates text that you should key in.
[ ] Indicates keys you should press. For example, [Enter] means to
press the Enter key. If keys need to be chorded, they appear
together in the same bracket with a plus sign between them:
[Ctrl+Alt].
1. Numbered lists represent procedures with sequential steps.
♦Bullet lists provide information, but do not involve sequential steps.
>
Indicates selecting consecutive options (such as on a menu or
dialog box). For example, Start
> Run means to open the Start
menu, and then select Run.
Indicates critical information.

1
Chapter 1
Introduction
Overview
The CAMLIVE™ PRO is designed to easily capture and mix the two connected
4K video sources in FHD format for livestream purpose with outstanding video
effects and remarkable image quality. This video capture device combines
video capture, encoding, and 2-channel video mixing and switching from HDMI
source and professional line-level audio device. It helps livestreaming become
unique and stand out from thousands of CDN videos. The CAMLIVE™ PRO
supports easy switch between multiple connected sources and combine them
for a rich information delivery in steaming. In addition, it automatically converts
the sources to clean-looking USB video format in 720P or 1080P, which is sent
to your laptop/smartphone via USB.
Easy to use – the CAMLIVE™ PRO provides an intuitive ATEN OnAir Lite App.
This App places everything you need to customize your video stream right at
your fingertips. Combine, crop, and scale video to make outstanding PnP
layouts. Preset up to 8 custom scenes and manage audio sources with the
intuitive touch panel interface for a superior pro-level finish. Open up a world of
possibilities by using the chroma keying. You can make it look like you are
anywhere by changing the background for eye-popping effects.
Providing smooth video streaming workflow for dual camera or single operator
setups, the CAMLIVE™ PRO allows any streamer to broadcast over internet
for higher quality livestream to major streaming services or remote conferencing
service such as YouTube Live, Facebook, OBS, Microsoft Teams, Microsoft
Mixer, Zoom, CameraFi, and Twitch. It enables eye-popping, high-quality one
stop programming streaming broadcasting capability with PC and Mac platform.
Whether you're capturing, editing or streaming, the CAMLIVE™ PRO is flexible
enough to fit all independent livestreaming broadcasting environments. This
micro device packs several features in one such as and its lightweight design
makes it possible to fit in any case and bring it to any live event. With just the
CAMLIVE™ PRO, companion app, and your laptop / smartphone, you have all
the devices you need to present engaging livestreaming that will rival the most
advanced streamers on social media and provides an easy-to-use solution.

CAMLIVE™ PRO User Manual
2
Features
 Mix and capture two unencrypted 4K live videos at 1080P UVC format on
PC or mobile device via USB 3.x interface with seamless transition
 Intuitive Android / iOS App control – set up your camera gear and direct
your show from anywhere
 Supports real-time HDMI program video preview
 Easily identifiable chroma keys – can make the video look like you are
anywhere by changing the background
 Provides audio mixer with additional dual analog audio inputs
 Supports protected video (encrypted) switching mode for regular event
usage
 Compatible with USB & Thunderbolt 3 (USB-C)
Planning the Installation
Requirements
Prepare the following before installing the CAMLIVE™ PRO unit:
 2 HDMI source devices
 1 HDMI display
 1 XLR audio source
 1 RCA audio source
 1 mobile device (Android / iOS)

Chapter 1. Introduction
3
Supported Operating System and Requirements
Note: For Windows 7 users, please download and install the Win7_driver from
on our website. To download the driver, see Downloading the Firmware
Upgrade Package, page 55.
Operating System Minimum Hardware Requirement
Windows 7 with Win7_driver installed CPU: Intel® i3 Dual Core 2.8Ghz or higher
RAM: 4GB or more
One USB-C Interface or USB-A Interface
Windows 10 or above
OS X 10.13 or later
Android 5.0.1 or later with UVC support Android smartphone with UVC and USB-C
Interface

CAMLIVE™ PRO User Manual
4
Components
Front View
No. Component Description
1
HDMI 1 video
status LED
The LED lights green to indicate the HDMI 1 video source
connection is in effect.
HDMI 1 audio
status LED
The LED lights green to indicate the HDMI 1 audio source
connection is in effect.
The LED lights orange to indicate the HDMI 1 audio source
connection is muted.
2
HDMI 2 video
status LED
The LED lights green to indicate the HDMI 2 video source
connection is in effect.
HDMI 2 audio
status LED
The LED lights green to indicate the HDMI 2 audio source
connection is in effect.
The LED lights orange to indicate the HDMI 2 audio source
connection is muted.
3
Analog 1 audio
Status LEDs
The LED lights green to indicate the Analog 1 (RCA) audio
source connection is in effect.
The LED lights orange to indicate the Analog 1 (RCA) audio
source connection is muted.
Analog 2 audio
status LEDs
The LED lights green to indicate the Analog 2 (XLR) audio
source connection is in effect.
The LED lights orange to indicate the Analog 2 (XLR) audio
source connection is muted.
4
123

Chapter 1. Introduction
5
4 Bluetooth link
pushbutton
Press to quickly switch between scene 1 and scene 2.
Press and hold 3 seconds to disconnect the Bluetooth
connection between CAMLIVE™ PRO and your mobile
device.
Press and hold the Bluetooth link pushbutton, and power on
the CAMLIVE™ PRO to perform a firmware upgrade. See
Preparation, page 56.
Press and hold the Bluetooth link pushbutton, power on the
CAMLIVE™ PRO, and wait for 10 seconds to reset the unit.
See Using the OnAir Cam App, page 24.
Note:
 All the LEDs blink at the same time to indicate that the firmware upgrade is in
progress.
 The HDMI 1 video status LED and the HDMI 2 video status LED blink once every
0.5 seconds for 3 seconds when you disconnect the Bluetooth connection.
No. Component Description

CAMLIVE™ PRO User Manual
6
Rear View
No. Component Description
1 USB Type-B
UVC output port
Connects to a host.
2 HDMI program
output port
Connects to an HDMI-enabled display for programmed
(PGM) video output.
3 HDMI 2 input
port
Connects to an HDMI input.
Note: This port supports interlaced HDMI video input.
4 HDMI 1 input
port
Connects to an HDMI input.
5 power jack The power adapter plugs here.
6 Analog 2 input
port
Connects XLR audio source here.
7 Analog 1 input
port (L/R)
Connects RCA audio source here.
8 HDCP switch Switch to display HDCP protected content.
9 Kensington Lock Kensington security slot plugs here.
4
123
78 9
56

7
Chapter 2
Hardware Setup
Mounting the Camera Mount Adapter
To mount the camera mount adapter, screw the camera mount adapter on the
bottom of the CAMLIVE™ PRO with the screws provided in the camera mount
adapter kit.
Optional Rack Mounting
For convenience and flexibility, the CAMLIVE™ PRO is compatible with the
Teranex Mini Rack Shelf.
Please review the safety information regarding the placement
of this device in Safety Instructions, page 61.
M3 x 5
1/4” Tripod Mount Thread