ATL Drop-Drum User manual

Plan View
Section View
Lift Sling Assembly
(O tional)
• aster Link
• Polyseter Lift Sling
10,000 lb. Working
Nut-Ring Flange (2)
• Internal
High-Tensile Tendons (3)
• Internal
DS-581-5Z10
H-D Cover Plates (2)
TOP PLATE Includes:
• Threaded Fill Port
2” FNPT (50mm)
(Gate Valve O tional)
• Welded Eyelets(2)
(Lift Sling O tional)
BOTTO PLATE - BLANK
• Access Hatch for Cleanout
AERO TEC LABORATORIES INC.
45 Spear Road Industrial Park
Ramsey, NJ 07446-1251 USA (Worldwide)
Tel: [phone] • Fax: [phone]
email: [email protected] www.atlinc.com
AERO TEC LABORATORIES LTD.
One Patriot Drive, Rooksley Park
ilton Keynes, England K13-8PU
Tel: [phone] • Fax: [phone]
email: [email protected]om www.atlltd.com
Gate Valve Assembly, 2”
(O tional)
Synthetic Rubber Bladder
• Reinforced with
Ballistic Nylon
• Access Hatch for Cleanout
ATL USER GUIDE
DR P-DRUM
Air Liftable, Collapsible, Fuel Transport Bladder
®
Call or Email for
Availability and Pricing

ATL DR P-DRUM® Fuel Bladders
Compatability: Diesel, JP Fuels, M GAS,
AVGAS, Kerosene, Lube ils
Capacity: 500 U.S. Gallons (2000 Liters)
ATL Part #: 108139
Dry Weight: 130 lbs. (59 kg)
Nominal Filled Dimensions:
51” diam. x 52” ht.
(130cm x 132cm)
Fill Pressure: 5 psi (34.5 kPa)
ax Working Pressure: 20 psi (137.9 kPa)
Nominal Burst Pressure: 40 psi (275.8 kPa)
g-Loads: 3-5 Vertical
Capacity: 250 U.S. Gallons (1000 Liters)
ATL Part #: 108129
Dry Weight: 100 lbs. (45.4 kg)
Nominal Filled Dimensions:
39” diam. x 42” ht.
(99cm x 107cm)
Fill Pressure: 5 psi (34.5 kPa)
ax Working Pressure: 25 psi (172.4 kPa)
Nominal Burst Pressure: 50 psi (344.7 kPa)
g-Loads: 5-10 Vertical
Capacity: 55 U.S. Gallons (220 Liters)
ATL Part #: 108106
Dry Weight: 60 lbs. (27 kg)
Nominal Filled Dimensions:
23” diam. x 35” ht.
(58.5 cm x 90cm)
Fill Pressure: 5 psi (34.5 kPa)
ax Working Pressure: 30 psi (206.8 kPa)
Nominal Burst Pressure: 80 psi (551.6 kPa)
g-Loads: 10-15 Vertical
I
II
III
IMPORTANT: Always fill and discharge the ATL
Drop Drum on a cleared, level surface that is free
from sharp objects and debris. This roduct is
not intended for consumer or recreational use.
Gate Valve Assembly
with Cam-Lock
Dust Cover
Part # 202040
FACT RY CRATED
Part # 202050
Polyester Lift
Sling Assembly
with Metal Hardware
To Fill Plate with
Lift Sling Assembly Installed
(Without Gate Valve Assembly)
OPTIONAL ACCESSORIES:
Your ATL Drop Drum
will arrive crated in
a hardwood shipping
container. Filling the
drum will cause it to
distend and it will be self-
supporting when full.
ATL USER GUIDE
DR P-DRUM
Air Liftable, Collapsible, Fuel Transport Bladder
®