Atlona AT-HD-V1616M User manual

Toll free: 1-877-536-3976
Local: 1-408-962-0515
HDMI 16 by 16 Matrix Switcher
AT-HD-V1616M
User Manual
atlona.com

Toll free: 1-877-536-3976
Local: 1-408-962-0515 2atlona.com
AT-HD-V1616M
Atlona HDMI 16 by 16 Matrix Switcher
Table of Contents
1. Introduction ............................................................................ 3
2. Package Contents ............................................................................ 3
3. Features ............................................................................ 3
4. Specications ............................................................................ 4
5. Control and Functions
a. Front Panel ............................................................................ 4
b. Back Panel ............................................................................ 5
c. Panel Control ............................................................................ 5
6. IR Remote Control ............................................................................ 6
7. TCP/IP ............................................................................ 6
a. set up ............................................................................ 7
8. RS-232 ............................................................................ 8
9. EDID ............................................................................ 9
10. Connections ............................................................................ 10
11. Safety ............................................................................ 11
12. Warranty ............................................................................ 12
13. Registration ............................................................................ 13

Toll free: 1-877-536-3976
Local: 1-408-962-0515 3
Power Cord IR Receiver Module RS-232 cable
atlona.com
AT-HD-V1616M
Atlona HDMI 16 by 16 Matrix Switcher
Features
Introduction
Package Contents
16 inputs, 16 outputs, HDCP compliant, EDID learning capability, RS-232 control option, and 9
programmable memory presets, The Atlona HDMI 16 by 16 Matrix Switcher has something for
most of your professional needs. The Atlona AT-HD-V1616M is compatible with all current HDMI
to DVI sources and will support resolutions up to 1920x1200 or 1080p.
• 1 x AT-HD-1616M
• 2 x Power Cord
• 1 x RS-232 male to female cable
• 1 x IR receiver module
• 1 x IR remote control
• 1 x User Manual
• HDCP compliant for seamless connection with HDMI to DVI sources
• Fully supports 3D
• 9 programmable memory presets for quick switching to the most used settings
• EDID allows for compatibility between any source and display with learning feature
• RS-232 compatible
• TCP/IP control enabled
• CEC capable
• Equalized ports to support up to 50 feet (15.24 meters) long HDMI cables. Supports longer
cables with HDMI extenders
• Redundant desktop power supply keeps your switcher running in the event the main power
supply fails
• Fast selection, switching time on average runs between 0.5 and 2 seconds. Switching time
varies with different displays.
• Mountable with 3RU Racks
• Dolby TrueHD and DTS-HD Master Audio supported

Toll free: 1-877-536-3976
Local: 1-408-962-0515 4atlona.com
AT-HD-V1616M
Atlona HDMI 16 by 16 Matrix Switcher
Bandwidth frequency 10.2 Gbps (340 MHz)
Input Ports 16 HDMI (Female Type)
Output Ports 16 HDMI (Female Type)
1 RS-232 port
1 IR 3.5mm port
1 Ethernet port
Resolution outputs Video: 480i, 576i, 1080i
480p, 576p, 720p, 1080p
1080p@60Hz
Vesa: 640x480, 768x576, 800x600, 1024x768
1280x960, 1400x1050, 1600x1200,
1920x1200
Dimensions (HxWxD) 5.22x17.03x12.6 (inch) or 132.5x432.6x320 (mm)
Weight 15.43lbs or 7kg
Temperature -4°F to 158°F or -20°C to 70°C
Power consumption 25W
Specifications
1. Power Indicator. Red LED will light up when power is on.
2. IR Receiver. Point your included IR remote control for the matrix switcher to receive commands
3. LCD Display. Displays commands and status messages
4. Menu for switching inputs, outputs, and functions
5. Menu for selecting inputs and outputs for your menu selections
Controls and Functions
Front
12345

Toll free: 1-877-536-3976
Local: 1-408-962-0515 5atlona.com
AT-HD-V1616M
Atlona HDMI 16 by 16 Matrix Switcher
Back
1. Video Inputs. Sources such as DVD players and computers should be connected here.
2. Video Outputs. Video displays should be connected here.
3. Power Regulator. Switch between 110V (US standard) and 220V (EU base standard).
4. RS-232 connector. Connect included RS-232 cable here if you wish to control your switcher by
PC or 3rd party controller
5. TCP/IP connector. Connect to your switcher through a network by connecting an Ethernet
cable here.
6. Primary and Secondary Power Supply. Connect included power cables here.
Panel Control
AV : Used to select input to output. Example: Input 3 to output 5 - Press 3 then AV then 5
(displays as 3AV5 on the LCD display)
“,” : Select multiple outputs with this. Example: Input 1 to output 3-5. Press 1 then AV then 3,4,5
(displays as 1AV345)
ALL : Press to connect all outputs for an input. Example: Input 2 to all outputs. Press 2ALL
Through : Sends inputs to corresponding outputs. Example: Input 4 to output 4. Press 4Through
Memory: Save the current settings for the switcher to create a reset between 0-9. Press Memory3
to save as preset 3
Recall: Uses saved presets that you’ve created. Press Recall3 to pull up what you saved with
Memory3
Undo: Goes back one step, if you’ve changed the wrong item and want it to go back to what it
was press undo
Enter: Used to end each selection. Example: 3AV5, press enter after to conrm your choice
<--: Used for EDID selection or as a backspace. Hold for 10 seconds for EDID commands
1 2 3456

Toll free: 1-877-536-3976
Local: 1-408-962-0515 6atlona.com
AT-HD-V1616M
Atlona HDMI 16 by 16 Matrix Switcher
Output Selection:
Press the number of the corresponding output (display)
you wish to select. For numbers 10 and above, select
10+ and the number following. Example: 13 = 10+
and 3
IR Remote Control
Input Selection:
Press the number corresponding with the input you wish to
select, for numbers 10 and above select 10+ and the number
following. Example: 10 = 10+ and 0
Menu Selection:
Choose the action you wish to perform. At this time with just
the AT-HD-V1616M the only menu items you will use are AV
and ALL. Example: Input 3 with output 5. Press #3 in the input
section, press AV, and then press #5 in the output section. The
LCD display will show the input as 3B5 on its screen.
Note:
Multiple outputs are not selectable through the IR Remote
control at this time. They are available through the front panel
and RS-232 controls.
TCP/IP is another way to control your AT-HD-V1616M. Connect with an ethernet cable to
computer.
IP address: 192.168.0.178
Subnet mask: 255.255255.0
Default gateway: 192.168.0.1
Preferred DNS: 202.96.134.133
Alternate DNS: 202.96.128.68
Use a straight cable to connect to a router or network.
Use a crossover cable to connect directly to a computer.
TCP/IP
your network or computer. After connecting the cable you’ll need to configure the IP on your

Toll free: 1-877-536-3976
Local: 1-408-962-0515 7
TCP/IP Set Up
Go to the Network Connections folder and right
click on the connection you would like to edit.
Select Properties.
Find Internet Protocol in your list. There will be either
Version 4 or 6, if there are both protocols choose
Version 4. Once highlighted click on the properties
buttons below the list box.
Once the window comes up enter in the
IP address, subnet mask, default gateway,
preferred DNS server and alternate DNS server
information into each eld. This will enable
TCP/IP control.
IP address: 192.168.0.178
Subnet mask: 255.255.255.0
Default gateway: 192.168.0.1
Preferred DNS server: 202.96.134.133
Alternate DNS server: 202.96.128.68
atlona.com
AT-HD-V1616M
Atlona HDMI 16 by 16 Matrix Switcher

Toll free: 1-877-536-3976
Local: 1-408-962-0515 8atlona.com
AT-HD-V1616M
Atlona HDMI 16 by 16 Matrix Switcher
RS-232
Connection
RS-232 is connected through a 9-pin female D connector. The pins will have functions associated
with them, some will be unassigned.
No. Pin Function
1 ---- Not used
2 Tx Transmit
3 Rx Receive
4 ---- Not used
5Gnd Ground
6 ---- Not used
7 ---- Not used
8 ---- Not used
9 ---- Not used
1
2
3
4
5
9 8 7 6
Baud Rate: 9600bps Data Bit: 8bits Parity: None Stop Bit: 1bit
Command
System Command Codes Functions
/*Type; Brings up the model information
/%Lock; Locks the front panel of the Matrix switcher
/%Unlock; Unlocks the front panel of the Matrix switcher
/^Version; Brings up the rmware’s version
The command codes are very sensitive, do not change capitalization, spacing, or lettering.
Command Feedback Description
PWON PWON Power on
PWOFF PWOFF Power off
All# All# Resets all inputs to corresponding outputs (in3 to out3)
x1$ x1$ Turns off output channel (to turn off output 3 = x3$)
x1AVx2 x1AVx2 Switch input to output (input 3 to output 5 = x3AVx5)
x1AVx2,x3,x4 x1AVx2,x3,x4 Switch input to multiple outputs (input 3 = x3AVx1,x2)
Statusx1 x7AVx1 Shows what input is connected to selected output
Status x1AVx1, x2AVx2,
x3AVx4, ....
Displays which inputs are currently connected to which outputs
Save[Y] Save2 Saves settings for future use, saves vary from 0 to 9
Recall[Y] Recall2 Pulls up saved settings for the number you selected
Clear[Y] Clear2 Erases the save for the number you selected
Mreset Mreset Sets matrix back to the default settings
Each command or feedback is terminated with a carriage return.
Note: If the command fails or is incorrect the feedback should be “Command FAILED”

Toll free: 1-877-536-3976
Local: 1-408-962-0515 9
EDID (Extended Display Identification Data)
Edid is the standard compatibility signal passed between most sources and video displays. It
allows the devices to make sure they support the same resolutions and timing.
Output 2
The AT-HD-V1616M has two EDID settings: default and learning. Default saves the settings
of 1080p resolution and 2 channel audio to all outputs. The learning setting will allow for the
copying of an output’s EDID to specic inputs.
Default
Default is used for when all displays support 1080p and 2 channel audio. If a display does
not support this resolution then it will show only a black screen. (i.e. Output5 having the native
resolution of 720p would cause it to show only a black screen in default)
1080p-Dolby TrueHD (3D)
Input 4
1080p
Input 2
720p
Input 8
720p
Output 5
Output 11
1080p-2ch
1080p-Dolby TrueHD (3D)
Learning
Learning EDID allows for the resolution and audio formats of a display to be saved to an input
source. Once this setting is saved it will only output that resolution and audio, which will cause a
black screen to display on any output that does not support the same settings.
I.E. If you save the settings of output11 to input4, input4 will only display 1080p and Dolby
TrueHD audio, which means output5 would receive no audio or video and output2 would receive
no audio.
If the settings of output11 to input4 are saved with 3D only 3D capable devices will be able to
get picture with input4. Input4 will be saved to 3D and a separate Blu-ray or DVD player will be
needed to be used with outputs incapable of 3D. Input4 will no longer be able to show anything
but 3D and will not play in any other resolutions.
In the above diagram, output5 can be saved to all 3 inputs allowing all three outputs to use the
devices at 720p (most displays have multiple resolution capabilities. Outputs 2 & 11 however
can only be saved to inputs 2 & 4 as their native resolutions are 1080p and input 8 is incapable
of producing that resolution without a scaler.
atlona.com
AT-HD-V1616M
Atlona HDMI 16 by 16 Matrix Switcher

Toll free: 1-877-536-3976
Local: 1-408-962-0515 10
Connections
atlona.com
AT-HD-V1616M
Atlona HDMI 16 by 16 Matrix Switcher