Atlona AT-PRO3HD66M User manual

User Manual
Atlona HDMI to HDBaseT
6 by 6 Matrix Switcher
AT-PRO3HD66M
atlona.com Toll free: 1-877-536-3976
Local: 1-408-962-0515

2
atlona.com Toll free: 1-877-536-3976
Local: 1-408-962-0515
1. Introduction ...................................................................................... 3
2. Package Contents ...................................................................................... 3
3. Features ...................................................................................... 3
4. Before You Start ...................................................................................... 3
5. Panel Descriptions
 •FrontPanel   ......................................................................................4
  •IR    ......................................................................................4
 •BackPanel   ......................................................................................5
6. Connection and Installation
 •3rdPartyControl   ......................................................................................6
 •IRRemoteControl  ......................................................................................7
 •MatrixI/OControl   ......................................................................................8
 •I/ORouteMemory  ......................................................................................9
 •EDID    ..................................................................................9-11
 •MatrixStatus   .....................................................................................12
7.RS-232
 •Connection   .....................................................................................13
 •SetUp    .....................................................................................13
8.TCP/IP 
 •RS-232TCP/IPSetUp  .....................................................................................14
 •LANTCP/IPSetUp  .................................................................................14-15
 •WebGUI    .................................................................................15-22
9.TCP/IPandRS-232Control
 •Commands   ......................................................................................23
 •TCP/IPCommands  ..................................................................................23-24
 •BaudRate    ..................................................................................24-25
10.RemoteControl   .....................................................................................25
11.ResettingandUpdating  .....................................................................................26
12. Specifications ..................................................................................... 27
13.SafetyInformation   .....................................................................................28
14.Warranty    .....................................................................................29
15.AtlonaProductRegistration  .....................................................................................30
Table of Contents

3
atlona.com Toll free: 1-877-536-3976
Local: 1-408-962-0515
Introduction
WiththelatestandmoreaffordableHDBaseT®technologyextendHDMI®sources up to 230ft over
categorycable.TheAtlonaHDMI6by6MatrixSwitcherallowsforeffortlesscontrolofupto12
devicesthroughIR,RS-232,TCP/IPandthefrontpanel.WithbuiltinS/PDIFportssendaudiotoan
AVRordistributionamp.Toensureallaudiopassesthrough,the6by6MatrixSwitchersupports
allLossyandLosslessformatsofDolby®andDTS™overHDMI.
Package Contents
Features
•1xAT-PRO3HD66M
•1x24V/6.25ADCadaptor
•1xPowercord
•1xIRExtender
•7xIREmitter
•1xRemotecontrol
•1xPairofdualpurposewall/rackmounts
•1xUserManual
•HDBaseTallowsIR,RS-232,audioandvisualsignalstopassoverasinglecategorycable.
•LatestfeatureofPoweroverCategorycable(PoCc™)enablesthematrixtopowerallcompatible
receivers.
•IRportsforzonededicatedcontrolthroughIRremotecontroland3rdpartycontrolboxes.
•ProgrammableI/Omemories,saveI/Oroutesforfasterswitchingtothemostcommonlyused
configurations.
•EDID™learningfunctionforupto6videodisplayEDIDs.
•BuiltininternalEDIDmodeprovides12individualEDIDstoensurecompatibilitywhenusingDVI
projectorsortryingtoroutedigitalmulti-channelaudiothroughanS/PDIFport
•MultiplecontroloptionssuchasRS-232,IR,TCP/IP,andthefrontpanel.
•Dolby®TrueHDandDTS-HDMasterAudio™passthroughHDMIoutputinterface.
•CompatiblewithDVI/D(withDVI/DtoHDMIadaptersuchasAT14050),allowingDVI/Dtobe
passedtodisplays.
•MirroredHDMIoutputsonzones5and6forinroomdisplaysorAVRs
•BuiltinS/PDIFaudiode-embeddingforAVRoraudiodistributionamplifiers.
CompatiblewithPCM2Channel,Dolby2.0,DolbyDigital5.1,andDTS5.1.
•Optionalredundantpowersupply(AT-PW24V6.25A)incasethemainpowersupplyfails.
•HDCPcompliant
Before You Start
•Makesurewhenconnectingacategorycablea568Bterminationmethodisused.
•Makesurethematrixisconnectedtoacomponentsurgesuppressorwithlineconditioning.
Note: Atlona’s warranty does not cover damage due to electrical disturbances. A component surge
suppressor with line conditioning is highly suggested, especially in areas with electrical
storms.
•Besureyou’reusingamonotomono(2conductor)3.5mmIRcablewhenusingIRoutput
controlfrom3rdpartycontrolboxes,stereo(3conductor)3.5mmcablesarenotcompatible.

4
atlona.com Toll free: 1-877-536-3976
Local: 1-408-962-0515
DC 24V
BACKUP
MAIN
ZONE 1 ZONE 2 ZONE 3 ZONE 4 ZONE 5 ZONE 6
MATRIX OUT
RS-232
FW
LAN HDMI IN
HDMI OUTHDMI OUT
MATRIX IN
IR IN
IR OUT
COAX OUT
CAT5e/6/7
IR IN
IR OUT
COAX OUT
CAT5e/6/7
IR IN
IR OUT
COAX OUT
CAT5e/6/7
IR IN
IR OUT
COAX OUT
CAT5e/6/7
IR IN
IR OUT
CAT5e/6/7
IR IN
IR OUT
CAT5e/6/7
1 2 3 4 5 6
AT-PRO3HD66M
AT-PRO3HD66M
123
456
EDID IR INFO
DEFAULT ALL MEMORY
FCN CANCEL
POWER ENTER
B
M
Panel Description
Front Panel
1.PowerButton-CyclesthepowerbetweenOn(bluebacklight)orStandby(redbacklight)mode.
2.EnterButton-Usetoviewcurrentstatusforinputsandoutputsortoconfirmacommand.
3.IRReceiverWindow-ReceivesthesignalfromtheincludedIRRemoteControlora3rdparty
controlbox.
4.FunctionButton-Selectforcommandoptions.(bluebacklightwhenselected)
a. Default:Mirrorsallinputstocorrespondingoutputs.(i.e.1to1,2to2,3to3,etc.)
 b.All:Saveasingleinputtoalltheoutputswiththisfunction
c. Memory:Save/loadthecurrentinputandoutputroutetomemory
d. EDID:Save/LoadEDIDstoindividualinputs
e. IR:TurnIRreceivingon/off(seebelow)
f. INFO:Displaysthefirmwareversiononthefrontdisplay
5.CancelButton-Withinthefunctionsmenuusetogobackonescreenortothehomescreen.
Note: You cannot power off or change functions unless you return to the home screen.
6.Numberbuttons-Usethesebuttonstoselectinputandoutputpathsorusewiththefunction
buttontochangematrixsettings.
34
2 a bc
def
1
5
6
TheIRreceiverwindowcansometimespickupstrayreflectedIRcommandscausinglossof
functionality.Todisablethefrontpanel,seedirectionsbelow:
IR
---> ---> --->
AT-PRO3HD66M
SelectInputNumber
home screen
SelectFunctionOption
--------------------
---> SelectIR1:On2:Off
Current: On/Off
SelectIR1:On2:Off
CurrentOn
SelectIR1:On2:Off
Current off
--->
--->
---> --->
--->
--->
Feedback=
”IROnSelected”
Feedback=
”IROffSelected”

5
atlona.com Toll free: 1-877-536-3976
Local: 1-408-962-0515
DC 24V
BACKUP
MAIN
ZONE 1 ZONE 2 ZONE 3 ZONE 4 ZONE 5 ZONE 6
MATRIX OUT
RS-232
FW
LAN HDMI IN
HDMI OUTHDMI OUT
MATRIX IN
IR IN
IR OUT
COAX OUT
CAT5e/6/7
IR IN
IR OUT
COAX OUT
CAT5e/6/7
IR IN
IR OUT
COAX OUT
CAT5e/6/7
IR IN
IR OUT
COAX OUT
CAT5e/6/7
IR IN
IR OUT
CAT5e/6/7
IR IN
IR OUT
CAT5e/6/7
1 2 3 4 5 6
AT-PRO3HD66M
AT-PRO3HD66M
123
456
EDID IR INFO
DEFAULT ALL MEMORY
FCN CANCEL
POWER ENTER
B
M
Back Panel
1.FirmwareUpdate-TypeBUSBPortusedforupdatingmatrixfirmware
2.RS-232-Connecttothisportforcontrolfromacomputeror3rdpartycontrolbox.
3.MatrixIRIn-UsedtocontrolmatrixI/Oswitchingfroma3rdpartyIRcontrolbox.
4.MatrixIROut-Globaloutput,combinesIRforallincomingzones.
5. Zone dedicated ports
 a.IR3.5mmmonoInports:Usedinconjunctionwith3rdpartyIRcontrolboxtoextendIR
 controlcommandstovideodisplaysovercategorycable.
Note: Be sure you’re using a mono to mono 3.5mm IR cable for 3rd party control boxes,
3.5mm stereo cables are not compatible.
 b.IROutports:SendsIRsignaltosourcesthrougha3.5mmIRemitter
 c.CoaxOut(S/PDIF):Audiode-embeddingfordistributionamplifiersandAVRs.
CompatiblewithPCM2Channel,Dolby2.0,DolbyDigital5.1,andDTS5.1.
 d.CAT5e/6/7Out(RJ45):ExtendsvideoandbidirectionalRS-232,IR,andaudiosignals
 throughasinglecategorycable.
 e.HDMIOut:MirroredHDMIoutput
6.MainPowerPort-UseincludedlockingDCadaptortopowerthematrixswitcher
7.LANPort-ForTCP/IPmatrixcontrol
8.HDMIInputPorts-ConnectHDMIsourcesintotheseports,suchasDVDplayers,Blu-rayplayers,
computers,etc.
9.BackUpPowerPort-Redundantpowersupply(AT-PW24V6.25Aavailableatatlona.com)
1 2 34
7 8 a bc ed 9
6
5

6
atlona.com Toll free: 1-877-536-3976
Local: 1-408-962-0515
NO
NC
COM
NO
NC
COM
NO
NC
COM
NO
NC
COM
GND
SIG
+12V
GND
SIG
+12V
GND
SIG
+12V
GND
SIG
+12V
1 2 3 4
RELAYS
WIFI 2
ZIGBEE 12V DC
IR OUT
IDFACTORY
RESTORE
SERIAL 1
SERIAL 2
HDMI COMPONENT
VIDEO OUT
ETHERNET
CONTACTS
AUDIO OUT
AUDIO IN
WIFI 1 eSATA USB
DIGITAL
COAX OUT
1
2
3
4
5
6
L
R
DC 24V
BACKUP
MAIN
ZONE 1 ZONE 2 ZONE 3 ZONE 4 ZONE 5 ZONE 6
MATRIX OUT
RS-232
FW
LAN HDMI IN
HDMI OUTHDMI OUT
MATRIX IN
IR IN
IR OUT
COAX OUT
CAT5e/6/7
IR IN
IR OUT
COAX OUT
CAT5e/6/7
IR IN
IR OUT
COAX OUT
CAT5e/6/7
IR IN
IR OUT
COAX OUT
CAT5e/6/7
IR IN
IR OUT
CAT5e/6/7
IR IN
IR OUT
CAT5e/6/7
1 2 3 4 5 6
AT-PRO3HD66M
AT-PRO3HD66M
123
456
EDID IR INFO
DEFAULT ALL MEMORY
FCN CANCEL
POWER ENTER
B
M
RS232 OUT IR OUT
HDMI OUT
CAT5/6
IN
LINK
IR IN
Connection and Installation
3rdPartyController
VideoDisplay
3rd Party Control box Set Up
IREmitter
Front Panel
IRReceiver
IREmitter
AT-PRO3HDREC
ZoneIRControl
MatrixIRControl
WiththefeatureoftheIRinputzoneportstheAT-PRO3HD66MhastheabilitytoreceiveIR
commandsfroma3rdpartycontrollerandsenditoutthroughtheCAT5e/6/7porttocontrolthe
displaysinanyzone.
Blu-ray Player
FCN CANCEL
POWER ENTER
B

7
atlona.com Toll free: 1-877-536-3976
Local: 1-408-962-0515
RS232 OUT IR OUT
HDMI OUT
CAT5/6
IN
LINK
IR IN
Note: IR signal is routed through the HDBaseT zone. Only the IR out of the corresponding zone will pass control signal
when using a 3rd party IR controller
IR Remote Control Set Up
DC 24V
BACKUP
MAIN
ZONE 1 ZONE 2 ZONE 3 ZONE 4 ZONE 5 ZONE 6
MATRIX OUT
RS-232
FW
LAN HDMI IN
HDMI OUTHDMI OUT
MATRIX IN
IR IN
IR OUT
COAX OUT
CAT5e/6/7
IR IN
IR OUT
COAX OUT
CAT5e/6/7
IR IN
IR OUT
COAX OUT
CAT5e/6/7
IR IN
IR OUT
COAX OUT
CAT5e/6/7
IR IN
IR OUT
CAT5e/6/7
IR IN
IR OUT
CAT5e/6/7
1 2 3 4 5 6
AT-PRO3HD66M
AT-PRO3HD66M
123
456
EDID IR INFO
DEFAULT ALL MEMORY
FCN CANCEL
POWER ENTER
B
M
Video Display
IR
Remote
IR Receiver
Module
Blu-ray Player
IR Emier
AT-PRO3HDREC

8
atlona.com Toll free: 1-877-536-3976
Local: 1-408-962-0515
I/O Control
TheAT-PRO3HD66M’sfrontpanelhas3functions:I/Ocontrol,EDID,andmatrixsettings.The
followingsectionsgooverstepbystepsetup&control.
(I.E.Input1tooutput2)
(I.E.Input1tooutput1,input2tooutput2,etc.)
(I.E.Input1tooutput1,2,3,4,5and6)
To set an input to an output
To mirror all inputs and outputs
To route one input to all outputs
Feedback =”Input # saved to
Output#”
Feedback =”MirroringInandOut”
Feedback =
”Input # saved to all”
Matrix Front Panel Functions
--->
--->
--->
--->
--->
--->
--->
---> --->
--->
--->
--->
--->
--->
--->
--->
--->
--->
---> --->
AT-PRO3HD66M
SelectInputNumber
AT-PRO3HD66M
SelectInputNumber
AT-PRO3HD66M
SelectInputNumber
SelectFunctionOption
SelectFunctionOption Selectinputnumber
to save to all outputs
Input # to all outputs
Press enter to confirm
MirrorIntoOut
Press enter to confirm
Selectoutputnumber
Press enter to confirm
home screen input selection
input selection
output selection
home screen
home screen
through
through
through

9
atlona.com Toll free: 1-877-536-3976
Local: 1-408-962-0515
To saveanI/Oroutetomemory
To loadasavedI/Oroute
Feedback =
”Memory#saved”
Feedback =
”Memory#loaded”
--->
--->
--->
--->
--->
--->
--->
--->
--->
--->
--->
--->
--->
--->
--->
---> --->
--->
AT-PRO3HD66M
SelectInputNumber
AT-PRO3HD66M
SelectInputNumber
SelectFunctionOption
SelectFunctionOption
1Savein/outroute
2Selectmemoryroute
1Savein/outroute
2Selectmemoryroute
Savetomemory(1-6)#
Press enter
SelectMemoryroute1-6
Press enter to load
home screen
home screen
memory selection
memory selection
Onceinputsandoutputshavebeensettheycanbesavedtomemoryandrecalledlater.Upto6
individualinput/outputroutescanbesaved.Theroutewillremaininmemoryuntilanewroutehas
beensavedtothatmemorynumberorthematrixhasbeenfactoryreset.
Onceaninput/outputroutehasbeensaved,itcanbeloadedatanytime.
I/O Route Memory
O:123456
I : 4 6 1 3 2 6
example route
Whenthematrixiscompletelyconnectedandturnedonitwillloadthedefault EDID,whichisthe
highestcommonnativeresolutionofthedevices.(i.e. In the diagram below the default would be
720p with 2ch audio. Multi-channel audio and 3D are not enabled on internal mode, unless
all devices have these features.)
EDID Set Up
Output 2
Output 3
Input 2
1080p-Dolby TrueHD (3D)
Input 1
Output 1
720p-2ch
720p-2ch
1080p (3D)-2ch
1080p-Dolby TrueHD (3D)
DC 24V
BACKUP
MAIN
ZONE 1 ZONE 2 ZONE 3 ZONE 4 ZONE 5 ZONE 6
MATRIX OUT
RS-232
FW
LAN HDMI IN
HDMI OUTHDMI OUT
MATRIX IN
IR IN
IR OUT
COAX OUT
CAT5e/6/7
IR IN
IR OUT
COAX OUT
CAT5e/6/7
IR IN
IR OUT
COAX OUT
CAT5e/6/7
IR IN
IR OUT
COAX OUT
CAT5e/6/7
IR IN
IR OUT
CAT5e/6/7
IR IN
IR OUT
CAT5e/6/7
1 2 3 4 5 6
AT-PRO3HD66M
AT-PRO3HD66M
123
456
EDID IR INFO
DEFAULT ALL MEMORY
FCN CANCEL
POWER ENTER
B
M
Ondefault,alldevicesinthediagramwillworkat720p.Ifadeviceisnotsyncingoradifferent
resolutionisrequired,internalEDIDorEDIDcopyandloadshouldresolvetheseissues.The
PRO3HD66Mcancopyupto6EDIDstomemory.
through
through

10
atlona.com Toll free: 1-877-536-3976
Local: 1-408-962-0515
Step 1:copyanEDID
---> ---> ---> --->
AT-PRO3HD66M
SelectInputNumber
SelectFunctionOption
home screen
1Tocopyupto6EDIDs
2TochooseinputEDID --->
---> Copyfromoutput#
SavetoMemory(1-6)#
Copyfromoutput#
SavetoMemory(1-6)#
Feedback=
”Savedport#EDIDto
Memory#[Failed/Passed]”
--->
--->
--->
--->
--->
BeforeanEDIDcanbeloadedtoaninput,itmustfirstbecopiedtothematrix’smemory.Each
display’sEDIDcanbesavedindividuallytooneofthematrix’ssixpresetEDIDmemories.
memory selection
output selection
Step 2:loadacopiedEDIDontoaninput
---> ---> ---> --->
AT-PRO3HD66M
SelectInputNumber
SelectFunctionOption
home screen
1Tocopyupto6EDIDs
2TochooseinputEDID
Input #
Select an input port
Input#PressEnter
Current: Default
Input: # Mode:
1.Default 2.Saved 3.Int
Input: # Select saved
EDIDmemory1-6(#)
UseEDIDmemory#+enter
_ _ _
--->
--->
Feedback =”Savememory#EDID
to input #”
--->
--->
--->
--->--->
--->
---> --->
--->
--->
AtlonaEDID -ATL
PioneerEDID -PIO
ToshibaEDID-TSB
EX.
OnceEDIDshavebeencopiedtomemorytheycanbeloadedtoaspecificinput.
Note:(refertothediagramonpage9)UsingtheEDIDofoutput3withinput1willenable1080p,
3D,andDolbyTrueHDtopass.Output2willreceivenoaudioorvideoandoutput1willreceiveno
audiowiththesesettings.
memory selection
input selection
throughthrough
through
through
through

11
atlona.com Toll free: 1-877-536-3976
Local: 1-408-962-0515
Step 3:LoadaninternalEDIDonaninput
---> ---> ---> --->
AT-PRO3HD66M
SelectInputNumber
SelectFunctionOption
home screen
Internal EDID options Front panel display readout
1Tocopyupto6EDIDs
2TochooseinputEDID
Input #
Select an input port
Input#PressEnter
Current: Default
Input: # Mode:
1.Default 2.Saved 3.Int
EDIDInternal#+enter
ATL_________
--->
--->
Feedback = ”Saved Internal #
To input #”
1- Cycles through
EDIDs in ascending
order
2- Cycles through
EDIDs in descending
order
--->
--->
--->
--->--->
---> --->
--->
--->
Ifthefirsttwostepsdon’tproducethecorrectresolutionoraudioconfiguration,thetwelve
internalEDIDsshouldresolvetheissue.
*RecommendedEDIDforuseofanAVR
**RecommendedEDIDforuseoftheS/PDIFaudiode-embedding
***RecommendedEDIDforuseofDVIprojectors
EDID1:1080P2CHaudio     ATL1080P2CH
EDID2:1080PHDmulti-channelaudio7.1*  ATL1080PMultiCH
EDID3:1080PDolbyDigital5.1**   ATL1080PDD
EDID4:1080P3D2CHaudio    ATL1080P3D2CH
EDID5:1080P3DHDmulti-channelaudio7.1*  ATL1080P3DMultiCH
EDID6:1080P3DDolbyDigital5.1**   ATL1080P3DDD
EDID7:720P2CHaudio     ATL720P2CH
EDID8:720PDolbyDigital5.1**    ATL720PDD
EDID9:1280x800RGB2CHaudio   ATL1280x800RGB2CH
EDID10:1366x768RGB2CHaudio   ATL1366x768RGB2CH
EDID11:1080PDVI***     ATL1080PDVI
EDID12:1280x800DVI***    ATL1280x800RGBDVI
Internal EDID selection
input selection
RS-232 commands:
ToaccessthedifferentEDIDsthroughRS-232thefollowingcommandsmustbeused.
Command Feedback Description
EDIDMSetXdefault EDIDMSetXdefault SetstheEDIDofaninputtothedefaultEDID
Ex.EDIDMset2default-setsinput2todefault
EDIDMSetXsaveY EDIDMSetXsaveY SetstheEDIDofaninputtothepreviouslysavedEDIDmemory
Ex.EDIDMset1save3-setsinput1totheEDIDmemory3
EDIDMSetXintZ EDIDMSetXintZ SetstheEDIDofaninputtooneoftheinternalEDIDs
Ex.EDIDMset3int6-setsinput3totheinternalEDID-1080p3DDolby
Digital 5.1
through

12
atlona.com Toll free: 1-877-536-3976
Local: 1-408-962-0515
Matrix Status
Wheninstallingortroubleshootingit’simportanttoverifysettings,orbeabletocomebacktoa
projectandseehowitwassetup.TheAT-PRO3HD66Mmatrixsettingsareviewablethroughthe
frontpaneldisplay.ViewcurrentI/Osettings,firmwareversion,FPGAversion,IP,andthebaud
ratesofnotjustthematrixbutextendersaswell.
---> ---> --->
--->
--->
AT-PRO3HD66M
SelectInputNumber
AT-PRO3HD66M
FWVer:0.X.XX
AT-PRO3HD66M
SelectInputNumber
O123456
Ixxxxxx
SelectFunctionOption
home screen
home screen
ViewFirmware/BaudRate/FPGA settings
ViewcurrentI/Osettings
AT-PRO3HD66M
Console:XXXX
AT-PRO3HD66M
IPAddr:XXX.XXX.XXX.XXX
AT-PRO3HD66M
Port1:XXXX
AT-PRO3HD66M
FPGA1Ver:0.0.XX
---> --->
--->
--->
--->
--->
--->
MatrixBaudRate
IPAddress
OutputBaudRate
FPGAVersion
--->
--->
--->
--->
-----------------------------------------------------------
1152008None1
OR
96008ODD0
Press4tocyclethrough
thebaudratesofeach
output port.
Press2tocyclethrough
IP,Netmask,Gateway,
IPport,andMAC
address
EX.

13
atlona.com Toll free: 1-877-536-3976
Local: 1-408-962-0515
RS-232
Connection
RS-232isconnectedthrougha9-pinfemaleDBconnector.Onlypins2,3,and5areterminated.
No. Pin Function
1 ---- Notused
2Tx Transmit
3Rx Receive
4 ---- Notused
5Gnd Ground
6 ---- Notused
7 ---- Notused
8 ---- Notused
9 ---- Notused
1
2
3
4
5
9 8 7 6
Set Up
TosetuptheRS-232hyperterminal(ifnotusing3rdpartysoftware)usethefollowingsteps:
1.ConnectthematrixtoaPCusinga9pinto9pincable
2.GototheDevicemanagerfolder(seepictureA)
3.FindtheMatrixCOMportandrightclickwithamouseandselectproperties(seepictureB)
 NOTE:IfunsurewhichCOMportisthematrix,unplugthe9pincableandplugitbackin.It
 willdisappearandreappearontheCOMportlist.
4.Underthepropertiesmenuselecttheportsettingstabandupdatethemenutothematrix
default settings of:BitsPerSecond:115200,DataBits:8,Parity:None,StopBits:1andFlow
Control:None.(seepictureC)
Setupisdoneandanyhyperterminalprogrammaybeusedtocontrolthematrixnow.
A
B
C

14
atlona.com Toll free: 1-877-536-3976
Local: 1-408-962-0515
TCP/IP
Warning!:DonotconnectthematrixLANportuntilthefirststepshavebeenfollowed.
BEFORE YOU PLUG IN ANYTHING:VerifynootherdevicesonthenetworkhavetheIPof
192.168.1.10(thematrixdefaultis192.168.1.10).(Seepage12toviewtheIPthroughthefrontpanel)
TherearetwowaystosetTCP/IPcontrolwhenanyoftheproductsonthenetworkhavethesame
IPaddressasthematrix:RS-232orthroughLANonanonnetworkedcomputer.
RS-232 TCP/IP Set up (Preferred)
LAN TCP/IP Set up (If RS-232 is not available)
Step1:FollowRS-232setupinstructionsonpage13
Step2:OpenHyperterminalprogram
Step3:VerifyDHCPisoff
 Sendcommand“IPDHCPsta”followedbyacarriagereturn
 Feedbackshouldbe“DHCPoff”
If DHCP is on use command “IPDHCPoff” to turn DHCP off
Step4:ChangethecurrentIPusingthecommand“IPStatic192.168.0.200 255.255.255.0 192.168.0.1”
IP can be anything that system devices aren’t currently using. (200 is just an example)
Step5:(optional)Changetheportusingthecommand“IPPort4400”followedbyacarriagereturn
 4400isjustanexample.Theportcanbechangedtowhatisneeded/wanted
ThematrixisnowreadytobeusedforTCP/IPcontrol.TheLANcablemaybeconnectednow.
Step1:ConnectLANtoacomputer
Step2:Rightclickthenetworkiconatthebottomrightsideofscreenand
 opennetworkandsharingcenteronPC(seepictureA)
Step3:Selectinternettypeconnection/localareaconnection(seepictureB)
Step4:Selectproperties(seepictureC)
Step4:SelectIPV.4andpressproperties(seepictureD)
AB
C D
RouterIPaddress

15
atlona.com Toll free: 1-877-536-3976
Local: 1-408-962-0515
Step5:ChangeIPto192.168.1.2andSubnet:255.255.255.0(seepictureE)
Step6:Pressapply
Step7:CloseinternettypeconnectionandlaunchWebGUI
 TypethedefaultIP(192.168.1.10)awebbrowser
Log in:
Username: root
  Password:Atlona
Step8:Ifdesired,changethenetworkaddressinformation
 Step9:Gobacktoyournetworksettingsandreturn
 theIPV.4totheoriginalsettings(seebelow)
Step10:ContinuewithWebGUI
E
TCP/IP WebGUI
AtlonahascreatedaneasytouseWebGUIforchangingsettingsandcontrollingthematrix.
Tobegin,typetheIPaddressofthematrixintoawebbrowser(asseenbelow)
Important:Ifexperiencinganystabilityissues,disableanyanti-virusorfirewallthatmaybe
  interferingwithnetworkcommunicationtotheMatrix.

16
atlona.com Toll free: 1-877-536-3976
Local: 1-408-962-0515
Aloginscreenwillappear.Forthefirstlogin(andfutureadminchanges)theusernameis“root”
andpasswordis“Atlona”.
Note: Theusernamecannotchange,butthepasswordcanbechanged(seepage19)
Thehomescreenwilldisplaythegeneralsoftwareandfirmwareinformation.Ifthematrixis
poweredofftheFPGAwillnotdisplay(seeabove).Oncethepowerisonitwilldisplay(seebelow).
Note:WhenthematrixisturnedoffmanyfieldswithintheWebGUIwillnotdisplayinformation.
 Besurethematrixispoweredonforcompletecontrol.

17
atlona.com Toll free: 1-877-536-3976
Local: 1-408-962-0515
ThenetworksetuppagewillallowtheIPinformationtobechanged.Whenachangeismadethe
screenwillgreyandtheabilitytosaveorcancelwilldisplayatthebottom(seebelow).
Note:IfDHCPison,theIPcannotbeconfigured.
Note: Besuretosaveallchangesbeforemovingtothenextpage

18
atlona.com Toll free: 1-877-536-3976
Local: 1-408-962-0515
Theconfigpageunderstatus/settingwillallowthezoneoutputandmatrixbaudratestobe
changed,aswellasturningpowerandtheIRreceivingwindowon/off.
Agreythescreenwilldisplaythesaveandcanceloptionswhenmakingchanges.Rememberto
saveallsettingsbeforemovingontothenextpage.
Note:Alllikefieldscanbechangedduringoneedit.

19
atlona.com Toll free: 1-877-536-3976
Local: 1-408-962-0515
Adding,deleting,andupdatinguserscanalsobedonefromtheconfigpage.Usernamechanges
canonlybedonebytheadmin.Adminusernameisalways“root”anddefaultpasswordis
“Atlona”.
Note:Onlytheadminpasswordcanbechanged.Theusernamewillalwaysremain“root”
Note:Alwaysremembertosavesettingsbeforemovingtothenextpage

20
atlona.com Toll free: 1-877-536-3976
Local: 1-408-962-0515
TheI/Opageallowsinputandoutputroutestobechangedeasilybydropdownmenu.OutputAll
willrouteoneselectedinputtoalltheoutputs.
Note:Allroutescanbechangedwhileinthegreyeditscreen.Remembertosaveafterallchanges
havebeenmade.