Atlona AT-COMP500 User manual

AtlonA
Component to Composite/S-Video Down-
converter
AT-COMP500
User Manual

TABLE OF CONTENTS
1. Introduction .................................................. 1
2. Features .................................................. 1
3. Hardware Description .................................................. 2
3.1. Front Panel .................................................. 2
3.2. Rear Panel .................................................. 2
4. Connection and Installation .................................................. 3
  
6. Safety Information .................................................. 4
7. Warranty .................................................. 5
8. Atlona Product Registration .................................................. 6

INTRODUCTION
1
Atlona Technologies’ HD to Video with HD bypass scan converter is designed to convert a va-
riety of HD images, from 480p up to 1080p and converts them to NTSC or PAL standard video
and HD image bypass. Simply use switch to select NTSC/PAL output format. The user also
can adjust the overscan/underscan from the front panel. This unit is perfect for applications
such as video conference, home theater, business presentation, lecturing room or viewing HD
image on TV.
 
 
output or HD bypass. It is suggested to lower the component input resolution. Scaling down
from the highest resolution to Composite video/S-video output can cause resolution distortion
during the video processing.
 
 
 
FEATURES:

2
3.1 Front Panel

Note: When input source is not displaying full screen (i.e. letter box/pillbox image) then the output display
 
before powering on the converter.

illuminated with Red, the system is in standby mode.
3 . Power: Plug the 5V DC power supply into the unit and connect the adaptor to an AC wall outlet.
3.2 Rear Panel

2 . PAL/NTSC: Switch the switcher to select PAL/NTSC output.
3 . Composite video output: Connect to video output display.
4 . S-Video output: Connect to S-Video output display.

HARDWARE DESCRIPTIONS

Input ports 
 

Switcher 
Power Supply 
 
 230
Chassis Material Aluminum
 
3
SPECIFICATIONS:
CONNECTION and INSTALLATION
DVD

NTSC / PAL TV

CV/SV
Front View
Touch Screen
Control Panel
Rear View