Atlona AT-HDSDI-AV User manual

AtlonA
HD/SD-SDI TO
HDMI/DVI/YPbPr/RBGHV CONVERTER
Use
r
Manual
AT
-
HDSDI
-
A
v

T ABLE OF CONTENTS


1. Introduction

2.Features
………………………………………… 1
………………………………………… 1


3. Package Contents

4. Technical Specifications

5. Format Specifications
………………………………………… 2
……………………………… 2
……………………………… 3


6. Panel Descriptions

7. Bottom
………………………………………… 5
………………………………………… 6


8. Pin Definition

9. Notice


8. Safety Information

9. Warranty
………………………………………… 7
………………………………………… 8
………………………………………… 9
.…..…………………………......….… 10







INTRODUCTION
The AT-HDSDI-AV provides high quality 12 bit conversion between SDI digital video
input and HDMI / DVI digital video output or YPbPr / Composite (CVBS) / RGBH
V
analog video output. Plus, with an extra DVI output through HDMI type A connector,
users can have a pure digital video transmission path without analog conversion
distortion. The AT-HDSDI-AV supports both SD-SDI and HD-SDI formats (SMPTE
259M and SMPTE 292M), and also features 2 equalized SDI loop output.
F EA TURES
∙ Excellent quality 12-bit D/A conversion
∙
Supported high-definition (HD) formats：
1080i @50/59.94/60Hz, 1035i @50/59.94/60Hz, 720p @50/59.94/60Hz
∙ Supported standard-definition (SD) formats：
NTSC @59.94Hz, PAL @50Hz
∙ Default SDI / YPbPr / DVI Patterns
∙ Auto HD/SD-SDI detection
∙ 2 Equalized loop output
∙ Easy installation
∙ SD output：HDMI (video only) / DVI / YPbPr
∙ HD output：HDMI (video only) / DVI / YPbPr / RGB
∙ External DIP Switch Configuration
1

PACKAGE CONTENTS
∙ 1x AT-HDSDI-
A
V
∙ 1x 5V 4A power adapter
∙ 1x User Manual
∙ 1x VGA to YPbPr adapter
∙ 1XHDMI to DVI adapter
T ECHNIC AL SPECIFIC A TIONS
∙ Video Bandwidth：270Mbps
1.485/1.001Gbps
∙ Input signal：HD/SD-SDI (SMPTE 259M / SMPTE 292M / SMPTE 296M)
∙ Output signal：HDMI (video only) / DVI 1.1 / YPbPr / RGBHV
∙ Input transmission range：up to 150m / 500ft at HD-SDI
∙ Loop output：2 equalized SDI output
∙ Power Supply：5V 4A DC
∙ Dimensions：120mm x 110mm x 25mm / 4.7”x4.3”x1” (L x W x H)
∙ Weight：420g / 15oz
2

FORMAT SPECIFICATIONS
HD INPUT YPbPr OUT
525p @ 59.94Hz SMPTE 293M, ITU-BT.1358
625p @ 50Hz ITU-BT.1358
720p @ 50Hz SMPTE 296M -3 O
720p @ 60 / 59.94Hz SMPTE 296M -1, -2 O
1080i @ 25Hz SMPTE 274M -6 O
1080i @ 30 / 29.97Hz SMPTE 274M -4, -5 O
1080p @ 24 / 23.98Hz SMPTE 274M -10, -11 O
1080p @ 25Hz SMPTE 274M -9 O
1080p @ 30 / 29.97Hz SMPTE 274M -7, -8 O
SD INPUT
NTSC O
PAL B,D,G,H,I O

HD INPUT DVI /HDMI
OUT
525P @ 59.94Hz SMPTE 293M, ITU-BT.1358
625P @ 50Hz ITU-BT.1358
720P @ 50Hz SMPTE 296M -3 O
720P @ 60 / 59.94Hz SMPTE 296M -1, -2 O
1080i @ 25Hz SMPTE 274M -6 O
1080i @ 30 / 29.97Hz SMPTE 274M -4, -5 O
1080p @ 24 / 23.98Hz SMPTE 274M -10, -11 O
1080p @ 25Hz SMPTE 274M -9 O
1080p @ 30 / 29.97Hz SMPTE 274M -7, -8 O
SD INPUT
NTSC O
PAL B,D,G,H,I O
3

HD INPUT VGA OUT
525p @ 59.94Hz SMPTE 293M, ITU-BT.1358
625p @ 50Hz ITU-BT.1358
720p @ 50Hz SMPTE 296M -3 O
720p @ 60 / 59.94Hz SMPTE 296M -1, -2 O
1080i @ 25Hz SMPTE 274M -6
1080i @ 30 / 29.97Hz SMPTE 274M -4, -5
1080p @ 24 / 23.98Hz SMPTE 274M -10, -11
1080p @ 25Hz SMPTE 274M -9
1080p @ 30 / 29.97Hz SMPTE 274M -7, -8
SD INPUT
NTSC
PAL B,D,G,H,I
HD INPUT Composite OUT
525p @ 59.94Hz SMPTE 293M, ITU-BT.1358
625p @ 50Hz ITU-BT.1358
720p @ 50Hz SMPTE 296M -3
720p @ 60 / 59.94Hz SMPTE 296M -1, -2
1080i @ 25Hz SMPTE 274M -6
1080i @ 30 / 29.97Hz SMPTE 274M -4, -5
1080p @ 24 / 23.98Hz SMPTE 274M -10, -11
1080p @ 25Hz SMPTE 274M -9
1080p @ 30 / 29.97Hz SMPTE 274M -7, -8
SD INPUT
NTSC O
PAL B,D,G,H,I O
4

P ANEL DESCRIPTIONS
FRONTPANEL
1 2 3 4 5 6 7
1. HD/SD-SDI Input 4. Power Indicator
5. HD/SD-SDI Output 2 2. HD/SD Bi-Color LED
Green：HD 6. IR Receiver (reserved)
7. 5V Power
Orange：SD
3. HD/SD-SDI Output 1
REARPANEL
1 2
1. HDMI Output
2. YPbPr / RGB Output
5

BOTTOM
An 8-pin DIP switch is used for user interface, and users can access this switch from the
bottom of the unit. Output formats, video patterns, SD Pedestal, SD Wide, PAL mode,
YPbPr / RGB, SD component or SD composite, YC on/off etc.
6

7
PIN DEFINITION
Pin 1 Pr / Red Pin 9 +5 V
Pin 2 Y / Green /
Composite Pin 10 Ground
Pin 3 Pb / Blue Pin 11 Ground
Pin 4 Ground Pin 12 Reserved
Pin 5 Ground Pin 13 Horizontal
Sync
Pin 6 Ground Pin 14 Vertical Sync
Pin 7 Ground Pin 15 Reserved
Pin 8 Ground
452
31
106
7
8
1514
9
111213

NOTICE
The AT-HDSDI-AV HD/SD-SDI to HDMI / DVI / YPbPr / Composite / RGBHV Converte
r
has been tested for conformance to safety regulations and requirements, and has been
certified for international use. However, like all electronic equipments, AT-HDSDI-
A
V
should be used with care. Please read and follow the safety instructions to protect
yourself from possible injury and to minimize the risk of damage to the unit.
1. Follow all instructions and warnings marked on this unit.
2. Do not attempt to service this unit yourself, except where explained in this manual.
3. Provide proper ventilation and air circulation and do not use near water.
4. Keep objects that might damage the device and assure that the placement of this unit
is on a stable surface.
5. Use only the power adapter and power cords and connection cables designed for this
unit.
6. Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to
the device before cleaning.
8